[net-next,v4,3/9] net: qlogic: qede: Use linkmode helpers for EEE

Message ID 20240218-keee-u32-cleanup-v4-3-71f13b7c3e60@lunn.ch
State New
Headers
Series drivers: net: Convert EEE handling to use linkmode bitmaps |

Commit Message

Andrew Lunn Feb. 18, 2024, 5:07 p.m. UTC
  Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 60 ++++++++++++++++---------
 1 file changed, 38 insertions(+), 22 deletions(-)
  

Comments

Simon Horman Feb. 20, 2024, 12:44 p.m. UTC | #1
On Sun, Feb 18, 2024 at 11:07:00AM -0600, Andrew Lunn wrote:
> Make use of the existing linkmode helpers for bit manipulation of EEE
> advertise, support and link partner support. The aim is to drop the
> restricted _u32 variants in the near future.
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>

Thanks Andrew,

the nit below notwithstanding this looks good to me.

Reviewed-by: Simon Horman <horms@kernel.org>

> ---
>  drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 60 ++++++++++++++++---------
>  1 file changed, 38 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c

..

> @@ -1812,9 +1820,12 @@ static int qede_get_eee(struct net_device *dev, struct ethtool_keee *edata)
>  
>  static int qede_set_eee(struct net_device *dev, struct ethtool_keee *edata)
>  {
> +	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = {};
> +	__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = {};
>  	struct qede_dev *edev = netdev_priv(dev);
>  	struct qed_link_output current_link;
>  	struct qed_link_params params;
> +	bool unsupp;
>  
>  	if (!edev->ops->common->can_link_change(edev->cdev)) {
>  		DP_INFO(edev, "Link settings are not allowed to be changed\n");
> @@ -1832,21 +1843,26 @@ static int qede_set_eee(struct net_device *dev, struct ethtool_keee *edata)
>  	memset(&params, 0, sizeof(params));
>  	params.override_flags |= QED_LINK_OVERRIDE_EEE_CONFIG;
>  
> -	if (!(edata->advertised_u32 & (ADVERTISED_1000baseT_Full |
> -				       ADVERTISED_10000baseT_Full)) ||
> -	    ((edata->advertised_u32 & (ADVERTISED_1000baseT_Full |
> -				       ADVERTISED_10000baseT_Full)) !=
> -	     edata->advertised_u32)) {
> +	linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
> +			 supported);
> +	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> +			 supported);
> +
> +	unsupp = linkmode_andnot(tmp, edata->advertised, supported);

nit: Given the types involved, I might have written this as:

	unsupp = !!linkmode_andnot(tmp, edata->advertised, supported);

> +	if (unsupp) {
>  		DP_VERBOSE(edev, QED_MSG_DEBUG,
> -			   "Invalid advertised capabilities %d\n",
> -			   edata->advertised_u32);
> +			   "Invalid advertised capabilities %*pb\n",
> +			   __ETHTOOL_LINK_MODE_MASK_NBITS, edata->advertised);
>  		return -EINVAL;
>  	}
>  
> -	if (edata->advertised_u32 & ADVERTISED_1000baseT_Full)
> +	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> +			      edata->advertised))
>  		params.eee.adv_caps = QED_EEE_1G_ADV;
> -	if (edata->advertised_u32 & ADVERTISED_10000baseT_Full)
> -		params.eee.adv_caps |= QED_EEE_10G_ADV;
> +	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
> +			      edata->advertised))
> +		params.eee.adv_caps = QED_EEE_10G_ADV;
> +
>  	params.eee.enable = edata->eee_enabled;
>  	params.eee.tx_lpi_enable = edata->tx_lpi_enabled;
>  	params.eee.tx_lpi_timer = edata->tx_lpi_timer;
> 
> -- 
> 2.43.0
> 
>
  
Andrew Lunn Feb. 20, 2024, 2:45 p.m. UTC | #2
> > +	unsupp = linkmode_andnot(tmp, edata->advertised, supported);
> 
> nit: Given the types involved, I might have written this as:
> 
> 	unsupp = !!linkmode_andnot(tmp, edata->advertised, supported);

linkmode_andnot() calls bitmap_andnot():

static inline bool bitmap_andnot(unsigned long *dst, const unsigned long *src1,
			const unsigned long *src2, unsigned int nbits)

It already returns a bool, so there is no need to force an int to bool
conversion using !!.

	Andrew
  
Simon Horman Feb. 21, 2024, 10:28 a.m. UTC | #3
On Tue, Feb 20, 2024 at 03:45:28PM +0100, Andrew Lunn wrote:
> > > +	unsupp = linkmode_andnot(tmp, edata->advertised, supported);
> > 
> > nit: Given the types involved, I might have written this as:
> > 
> > 	unsupp = !!linkmode_andnot(tmp, edata->advertised, supported);
> 
> linkmode_andnot() calls bitmap_andnot():
> 
> static inline bool bitmap_andnot(unsigned long *dst, const unsigned long *src1,
> 			const unsigned long *src2, unsigned int nbits)
> 
> It already returns a bool, so there is no need to force an int to bool
> conversion using !!.

Good point, sorry for missing that.
I assume there is a reason that the return type of
linkmode_andnot is not bool.
  
Andrew Lunn Feb. 22, 2024, 3:11 p.m. UTC | #4
On Wed, Feb 21, 2024 at 10:28:51AM +0000, Simon Horman wrote:
> On Tue, Feb 20, 2024 at 03:45:28PM +0100, Andrew Lunn wrote:
> > > > +	unsupp = linkmode_andnot(tmp, edata->advertised, supported);
> > > 
> > > nit: Given the types involved, I might have written this as:
> > > 
> > > 	unsupp = !!linkmode_andnot(tmp, edata->advertised, supported);
> > 
> > linkmode_andnot() calls bitmap_andnot():
> > 
> > static inline bool bitmap_andnot(unsigned long *dst, const unsigned long *src1,
> > 			const unsigned long *src2, unsigned int nbits)
> > 
> > It already returns a bool, so there is no need to force an int to bool
> > conversion using !!.
> 
> Good point, sorry for missing that.

> I assume there is a reason that the return type of
> linkmode_andnot is not bool.

Either i got it wrong when i added the wrapper, or bitmap_andnot() has
changed since then?

It probably can be changed to a bool.

	Andrew
  

Patch

diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
index dfa15619fd78..ae3ebf0cf999 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
@@ -1789,18 +1789,26 @@  static int qede_get_eee(struct net_device *dev, struct ethtool_keee *edata)
 		return -EOPNOTSUPP;
 	}
 
-	if (current_link.eee.adv_caps & QED_EEE_1G_ADV)
-		edata->advertised_u32 = ADVERTISED_1000baseT_Full;
-	if (current_link.eee.adv_caps & QED_EEE_10G_ADV)
-		edata->advertised_u32 |= ADVERTISED_10000baseT_Full;
-	if (current_link.sup_caps & QED_EEE_1G_ADV)
-		edata->supported_u32 = ADVERTISED_1000baseT_Full;
-	if (current_link.sup_caps & QED_EEE_10G_ADV)
-		edata->supported_u32 |= ADVERTISED_10000baseT_Full;
-	if (current_link.eee.lp_adv_caps & QED_EEE_1G_ADV)
-		edata->lp_advertised_u32 = ADVERTISED_1000baseT_Full;
-	if (current_link.eee.lp_adv_caps & QED_EEE_10G_ADV)
-		edata->lp_advertised_u32 |= ADVERTISED_10000baseT_Full;
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			 edata->advertised,
+			 current_link.eee.adv_caps & QED_EEE_1G_ADV);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			 edata->advertised,
+			 current_link.eee.adv_caps & QED_EEE_10G_ADV);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			 edata->supported,
+			 current_link.sup_caps & QED_EEE_1G_ADV);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			 edata->supported,
+			 current_link.sup_caps & QED_EEE_10G_ADV);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			 edata->lp_advertised,
+			 current_link.eee.lp_adv_caps & QED_EEE_1G_ADV);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			 edata->lp_advertised,
+			 current_link.eee.lp_adv_caps & QED_EEE_10G_ADV);
 
 	edata->tx_lpi_timer = current_link.eee.tx_lpi_timer;
 	edata->eee_enabled = current_link.eee.enable;
@@ -1812,9 +1820,12 @@  static int qede_get_eee(struct net_device *dev, struct ethtool_keee *edata)
 
 static int qede_set_eee(struct net_device *dev, struct ethtool_keee *edata)
 {
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = {};
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = {};
 	struct qede_dev *edev = netdev_priv(dev);
 	struct qed_link_output current_link;
 	struct qed_link_params params;
+	bool unsupp;
 
 	if (!edev->ops->common->can_link_change(edev->cdev)) {
 		DP_INFO(edev, "Link settings are not allowed to be changed\n");
@@ -1832,21 +1843,26 @@  static int qede_set_eee(struct net_device *dev, struct ethtool_keee *edata)
 	memset(&params, 0, sizeof(params));
 	params.override_flags |= QED_LINK_OVERRIDE_EEE_CONFIG;
 
-	if (!(edata->advertised_u32 & (ADVERTISED_1000baseT_Full |
-				       ADVERTISED_10000baseT_Full)) ||
-	    ((edata->advertised_u32 & (ADVERTISED_1000baseT_Full |
-				       ADVERTISED_10000baseT_Full)) !=
-	     edata->advertised_u32)) {
+	linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			 supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			 supported);
+
+	unsupp = linkmode_andnot(tmp, edata->advertised, supported);
+	if (unsupp) {
 		DP_VERBOSE(edev, QED_MSG_DEBUG,
-			   "Invalid advertised capabilities %d\n",
-			   edata->advertised_u32);
+			   "Invalid advertised capabilities %*pb\n",
+			   __ETHTOOL_LINK_MODE_MASK_NBITS, edata->advertised);
 		return -EINVAL;
 	}
 
-	if (edata->advertised_u32 & ADVERTISED_1000baseT_Full)
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      edata->advertised))
 		params.eee.adv_caps = QED_EEE_1G_ADV;
-	if (edata->advertised_u32 & ADVERTISED_10000baseT_Full)
-		params.eee.adv_caps |= QED_EEE_10G_ADV;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			      edata->advertised))
+		params.eee.adv_caps = QED_EEE_10G_ADV;
+
 	params.eee.enable = edata->eee_enabled;
 	params.eee.tx_lpi_enable = edata->tx_lpi_enabled;
 	params.eee.tx_lpi_timer = edata->tx_lpi_timer;