[v4,5/7] arm64: Unconditionally call unflatten_device_tree()

Message ID 20240217010557.2381548-6-sboyd@kernel.org
State New
Headers
Series of: populate of_root node if bootloader doesn't |

Commit Message

Stephen Boyd Feb. 17, 2024, 1:05 a.m. UTC
  Call this function unconditionally so that we can populate an empty DTB
on platforms that don't boot with a firmware provided or builtin DTB.
When ACPI is in use, unflatten_device_tree() ignores the
'initial_boot_params' pointer so the live DT on those systems won't be
whatever that's pointing to. Similarly, when kexec copies the DT data
the previous kernel to the new one on ACPI systems,
of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
one) and copy the 'initial_boot_params' data.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm64/kernel/setup.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
  

Comments

Rob Herring Feb. 23, 2024, 12:03 a.m. UTC | #1
On Fri, Feb 16, 2024 at 05:05:54PM -0800, Stephen Boyd wrote:
> Call this function unconditionally so that we can populate an empty DTB
> on platforms that don't boot with a firmware provided or builtin DTB.
> When ACPI is in use, unflatten_device_tree() ignores the
> 'initial_boot_params' pointer so the live DT on those systems won't be
> whatever that's pointing to. Similarly, when kexec copies the DT data
> the previous kernel to the new one on ACPI systems,
> of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
> one) and copy the 'initial_boot_params' data.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Frank Rowand <frowand.list@gmail.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> ---
>  arch/arm64/kernel/setup.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)

Catalin, Will, Can I get an ack on this so I can take the series via the 
DT tree.

Rob
  
Will Deacon Feb. 23, 2024, 10:23 a.m. UTC | #2
On Thu, Feb 22, 2024 at 05:03:17PM -0700, Rob Herring wrote:
> On Fri, Feb 16, 2024 at 05:05:54PM -0800, Stephen Boyd wrote:
> > Call this function unconditionally so that we can populate an empty DTB
> > on platforms that don't boot with a firmware provided or builtin DTB.
> > When ACPI is in use, unflatten_device_tree() ignores the
> > 'initial_boot_params' pointer so the live DT on those systems won't be
> > whatever that's pointing to. Similarly, when kexec copies the DT data
> > the previous kernel to the new one on ACPI systems,
> > of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
> > one) and copy the 'initial_boot_params' data.
> > 
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Frank Rowand <frowand.list@gmail.com>
> > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Will Deacon <will@kernel.org>
> > Cc: Mark Rutland <mark.rutland@arm.com>
> > Cc: <linux-arm-kernel@lists.infradead.org>
> > Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> > ---
> >  arch/arm64/kernel/setup.c | 3 +--
> >  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> Catalin, Will, Can I get an ack on this so I can take the series via the 
> DT tree.

Mark had strong pretty strong objections to this in version one:

https://lore.kernel.org/all/ZaZtbU9hre3YhZam@FVFF77S0Q05N/

and this patch looks the same now as it did then. Did something else
change?

Will
  
Rob Herring Feb. 23, 2024, 6:17 p.m. UTC | #3
On Fri, Feb 23, 2024 at 3:23 AM Will Deacon <will@kernel.org> wrote:
>
> On Thu, Feb 22, 2024 at 05:03:17PM -0700, Rob Herring wrote:
> > On Fri, Feb 16, 2024 at 05:05:54PM -0800, Stephen Boyd wrote:
> > > Call this function unconditionally so that we can populate an empty DTB
> > > on platforms that don't boot with a firmware provided or builtin DTB.
> > > When ACPI is in use, unflatten_device_tree() ignores the
> > > 'initial_boot_params' pointer so the live DT on those systems won't be
> > > whatever that's pointing to. Similarly, when kexec copies the DT data
> > > the previous kernel to the new one on ACPI systems,
> > > of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
> > > one) and copy the 'initial_boot_params' data.
> > >
> > > Cc: Rob Herring <robh+dt@kernel.org>
> > > Cc: Frank Rowand <frowand.list@gmail.com>
> > > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > > Cc: Will Deacon <will@kernel.org>
> > > Cc: Mark Rutland <mark.rutland@arm.com>
> > > Cc: <linux-arm-kernel@lists.infradead.org>
> > > Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> > > ---
> > >  arch/arm64/kernel/setup.c | 3 +--
> > >  1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > Catalin, Will, Can I get an ack on this so I can take the series via the
> > DT tree.
>
> Mark had strong pretty strong objections to this in version one:

Yes, I had concerns with it as well.

> https://lore.kernel.org/all/ZaZtbU9hre3YhZam@FVFF77S0Q05N/
>
> and this patch looks the same now as it did then. Did something else
> change?

Yes, that version unflattened the bootloader passed DT. Now within
unflatten_devicetree(), the bootloader DT is ignored if ACPI is
enabled and we unflatten an empty tree. That will prevent the kernel
getting 2 h/w descriptions if/when a platform does such a thing. Also,
kexec still uses the bootloader provided DT as before.

Rob
  
Oreoluwa Babatunde Feb. 27, 2024, 5:22 p.m. UTC | #4
On 2/16/2024 5:05 PM, Stephen Boyd wrote:

> Call this function unconditionally so that we can populate an empty DTB
> on platforms that don't boot with a firmware provided or builtin DTB.
> When ACPI is in use, unflatten_device_tree() ignores the
> 'initial_boot_params' pointer so the live DT on those systems won't be
> whatever that's pointing to. Similarly, when kexec copies the DT data
> the previous kernel to the new one on ACPI systems,
> of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
> one) and copy the 'initial_boot_params' data.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Frank Rowand <frowand.list@gmail.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>

This change looks good to me. I am working on a patch set that will benefit from this.
Reviewed-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>

Regards,
Oreoluwa

> ---
>  arch/arm64/kernel/setup.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
> index 42c690bb2d60..0d210720d47d 100644
> --- a/arch/arm64/kernel/setup.c
> +++ b/arch/arm64/kernel/setup.c
> @@ -351,8 +351,7 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p)
>  	/* Parse the ACPI tables for possible boot-time configuration */
>  	acpi_boot_table_init();
>  
> -	if (acpi_disabled)
> -		unflatten_device_tree();
> +	unflatten_device_tree();
>  
>  	bootmem_init();
  
Mark Rutland Feb. 27, 2024, 5:34 p.m. UTC | #5
On Fri, Feb 23, 2024 at 11:17:02AM -0700, Rob Herring wrote:
> On Fri, Feb 23, 2024 at 3:23 AM Will Deacon <will@kernel.org> wrote:
> >
> > On Thu, Feb 22, 2024 at 05:03:17PM -0700, Rob Herring wrote:
> > > On Fri, Feb 16, 2024 at 05:05:54PM -0800, Stephen Boyd wrote:
> > > > Call this function unconditionally so that we can populate an empty DTB
> > > > on platforms that don't boot with a firmware provided or builtin DTB.
> > > > When ACPI is in use, unflatten_device_tree() ignores the
> > > > 'initial_boot_params' pointer so the live DT on those systems won't be
> > > > whatever that's pointing to. Similarly, when kexec copies the DT data
> > > > the previous kernel to the new one on ACPI systems,
> > > > of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
> > > > one) and copy the 'initial_boot_params' data.
> > > >
> > > > Cc: Rob Herring <robh+dt@kernel.org>
> > > > Cc: Frank Rowand <frowand.list@gmail.com>
> > > > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > > > Cc: Will Deacon <will@kernel.org>
> > > > Cc: Mark Rutland <mark.rutland@arm.com>
> > > > Cc: <linux-arm-kernel@lists.infradead.org>
> > > > Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> > > > ---
> > > >  arch/arm64/kernel/setup.c | 3 +--
> > > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > >
> > > Catalin, Will, Can I get an ack on this so I can take the series via the
> > > DT tree.
> >
> > Mark had strong pretty strong objections to this in version one:
> 
> Yes, I had concerns with it as well.
> 
> > https://lore.kernel.org/all/ZaZtbU9hre3YhZam@FVFF77S0Q05N/
> >
> > and this patch looks the same now as it did then. Did something else
> > change?
> 
> Yes, that version unflattened the bootloader passed DT. Now within
> unflatten_devicetree(), the bootloader DT is ignored if ACPI is
> enabled and we unflatten an empty tree. That will prevent the kernel
> getting 2 h/w descriptions if/when a platform does such a thing. Also,
> kexec still uses the bootloader provided DT as before.

That avoids the main instance of my concern, and means that this'll boot
without issue, but IIUC this opens the door to dynamically instantiating DT
devices atop an ACPI base system, which I think in general is something that's
liable to cause more problems than it solves.

I understand that's desireable for the selftests, though I still don't believe
it's strictly necessary -- there are plenty of other things that only work if
the kernel is booted in a specific configuration.

Putting the selftests aside, why do we need to do this? Is there any other
reason to enable this?

Mark.
  
Rob Herring Feb. 28, 2024, 4:26 p.m. UTC | #6
On Tue, Feb 27, 2024 at 05:34:58PM +0000, Mark Rutland wrote:
> On Fri, Feb 23, 2024 at 11:17:02AM -0700, Rob Herring wrote:
> > On Fri, Feb 23, 2024 at 3:23 AM Will Deacon <will@kernel.org> wrote:
> > >
> > > On Thu, Feb 22, 2024 at 05:03:17PM -0700, Rob Herring wrote:
> > > > On Fri, Feb 16, 2024 at 05:05:54PM -0800, Stephen Boyd wrote:
> > > > > Call this function unconditionally so that we can populate an empty DTB
> > > > > on platforms that don't boot with a firmware provided or builtin DTB.
> > > > > When ACPI is in use, unflatten_device_tree() ignores the
> > > > > 'initial_boot_params' pointer so the live DT on those systems won't be
> > > > > whatever that's pointing to. Similarly, when kexec copies the DT data
> > > > > the previous kernel to the new one on ACPI systems,
> > > > > of_kexec_alloc_and_setup_fdt() will ignore the live DT (the empty root
> > > > > one) and copy the 'initial_boot_params' data.
> > > > >
> > > > > Cc: Rob Herring <robh+dt@kernel.org>
> > > > > Cc: Frank Rowand <frowand.list@gmail.com>
> > > > > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > > > > Cc: Will Deacon <will@kernel.org>
> > > > > Cc: Mark Rutland <mark.rutland@arm.com>
> > > > > Cc: <linux-arm-kernel@lists.infradead.org>
> > > > > Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> > > > > ---
> > > > >  arch/arm64/kernel/setup.c | 3 +--
> > > > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > > >
> > > > Catalin, Will, Can I get an ack on this so I can take the series via the
> > > > DT tree.
> > >
> > > Mark had strong pretty strong objections to this in version one:
> > 
> > Yes, I had concerns with it as well.
> > 
> > > https://lore.kernel.org/all/ZaZtbU9hre3YhZam@FVFF77S0Q05N/
> > >
> > > and this patch looks the same now as it did then. Did something else
> > > change?
> > 
> > Yes, that version unflattened the bootloader passed DT. Now within
> > unflatten_devicetree(), the bootloader DT is ignored if ACPI is
> > enabled and we unflatten an empty tree. That will prevent the kernel
> > getting 2 h/w descriptions if/when a platform does such a thing. Also,
> > kexec still uses the bootloader provided DT as before.
> 
> That avoids the main instance of my concern, and means that this'll boot
> without issue, but IIUC this opens the door to dynamically instantiating DT
> devices atop an ACPI base system, which I think in general is something that's
> liable to cause more problems than it solves.
> 
> I understand that's desireable for the selftests, though I still don't believe
> it's strictly necessary -- there are plenty of other things that only work if
> the kernel is booted in a specific configuration.

Why add to the test matrix if we don't have to?

> Putting the selftests aside, why do we need to do this? Is there any other
> reason to enable this?

See my Plumbers talk...

Or in short, there's 3 main usecases:

- PCI FPGA card with devices instantiated in it 
- SoCs which expose their peripherals via a PCI endpoint.
- Injecting test devices with QEMU (testing, but not what this series 
  does. Jonathan Cameron's usecase)

In all cases, drivers already exist for the devices, and they often only 
support DT. DT overlays is the natural solution for this, and there's 
now kernel support for it (dynamically generating PCI DT nodes when they 
don't exist). The intent is to do the same thing on ACPI systems.

I don't see another solution other than 'go away, you're crazy'. There's 
ACPI overlays, but that's only a debug feature. Also, that would 
encourage more of the DT bindings in ACPI which I find worse than this 
mixture. There's swnodes, but that's just board files and platform_data 
2.0.

I share the concerns with mixing, but I don't see a better solution. The 
scope of what's possible is contained enough to avoid issues.

Rob
  

Patch

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 42c690bb2d60..0d210720d47d 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -351,8 +351,7 @@  void __init __no_sanitize_address setup_arch(char **cmdline_p)
 	/* Parse the ACPI tables for possible boot-time configuration */
 	acpi_boot_table_init();
 
-	if (acpi_disabled)
-		unflatten_device_tree();
+	unflatten_device_tree();
 
 	bootmem_init();