[v2,3/4] ARM: dts: stm32: enable display support on stm32mp135f-dk board
Commit Message
Link panel and display controller.
Enable panel, backlight and display controller.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
Changes in v2:
- Fixed dtbs_check warnings :
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-backlight: 'default-brightness-level' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18', 'jeida-24', 'vesa-24']
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: data-mapping: False schema does not allow ['bgr666']
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
---
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 53 +++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
@@ -66,6 +66,46 @@ led-blue {
default-state = "off";
};
};
+
+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
+ panel_rgb: panel-rgb {
+ compatible = "rocktech,rk043fn48h";
+ enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+ backlight = <&panel_backlight>;
+ power-supply = <&scmi_v3v3_sw>;
+ status = "okay";
+
+ width-mm = <105>;
+ height-mm = <67>;
+
+ panel-timing {
+ clock-frequency = <10000000>;
+ hactive = <480>;
+ hback-porch = <43>;
+ hfront-porch = <10>;
+ hsync-len = <1>;
+ hsync-active = <0>;
+ vactive = <272>;
+ vback-porch = <26>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
};
&adc_1 {
@@ -160,6 +200,19 @@ &iwdg2 {
status = "okay";
};
+<dc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-1 = <<dc_sleep_pins_a>;
+ status = "okay";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
&rtc {
status = "okay";
};