[RFC,2/4] phy: hisilicon: enable clocks for every ports

Message ID 20240216-inno-phy-v1-2-1ab912f0533f@outlook.com
State New
Headers
Series phy: hisi-inno-phy: add support for hi3798mv200-usb2-phy |

Commit Message

Yang Xiwen via B4 Relay Feb. 16, 2024, 3:21 p.m. UTC
  From: Yang Xiwen <forbidden405@outlook.com>

This is needed for port1 to work.

Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
---
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
  

Patch

diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
index c138cd4807d6..b7e740eb4752 100644
--- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -86,8 +86,10 @@  static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
 
 static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
 {
+	int i;
 	/* The phy clk is controlled by the port0 register 0x06. */
-	hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE);
+	for (i = 0; i < INNO_PHY_PORT_NUM; i++)
+		hisi_inno_phy_write_reg(priv, i, 0x06, PHY_CLK_ENABLE);
 	msleep(PHY_CLK_STABLE_TIME);
 }