diff mbox series

[3/3] RDMA/hfi1: Use RMW accessors for changing LNKCTL2

Message ID 20240215133155.9198-4-ilpo.jarvinen@linux.intel.com
State New
Headers
Series PCI LNKCTL2 RMW Accessor Cleanup |

Commit Message

Ilpo Järvinen Feb. 15, 2024, 1:31 p.m. UTC 
  Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.

LNKCTL2 is not really owned by any driver because it is a collection of
control bits that PCI core might need to touch. RMW accessors already
have support for proper locking for a selected set of registers
(LNKCTL2 is not yet among them but likely will be in the future) to
avoid losing concurrent updates.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
---
 drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 119ec2f1382b..7133964749f8 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -1207,14 +1207,11 @@  int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 		    (u32)lnkctl2);
 	/* only write to parent if target is not as high as ours */
 	if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) {
-		lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
-		lnkctl2 |= target_vector;
-		dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
-			    (u32)lnkctl2);
-		ret = pcie_capability_write_word(parent,
-						 PCI_EXP_LNKCTL2, lnkctl2);
+		ret = pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL2,
+							 PCI_EXP_LNKCTL2_TLS,
+							 target_vector);
 		if (ret) {
-			dd_dev_err(dd, "Unable to write to PCI config\n");
+			dd_dev_err(dd, "Unable to change parent PCI target speed\n");
 			return_error = 1;
 			goto done;
 		}
@@ -1223,22 +1220,11 @@  int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 	}
 
 	dd_dev_info(dd, "%s: setting target link speed\n", __func__);
-	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+	ret = pcie_capability_clear_and_set_word(dd->pcidev, PCI_EXP_LNKCTL2,
+						 PCI_EXP_LNKCTL2_TLS,
+						 target_vector);
 	if (ret) {
-		dd_dev_err(dd, "Unable to read from PCI config\n");
-		return_error = 1;
-		goto done;
-	}
-
-	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
-		    (u32)lnkctl2);
-	lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
-	lnkctl2 |= target_vector;
-	dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
-		    (u32)lnkctl2);
-	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
-	if (ret) {
-		dd_dev_err(dd, "Unable to write to PCI config\n");
+		dd_dev_err(dd, "Unable to change device PCI target speed\n");
 		return_error = 1;
 		goto done;
 	}