[v3,4/7] remoteproc: core: Implement the support of an alternative boot
Commit Message
Implement a new method to load a firmware and start the remote processor.
In this method the firmware is loaded first and then the loaded resource
table is obtained.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
drivers/remoteproc/remoteproc_core.c | 86 +++++++++++++++++++++++++++-
include/linux/remoteproc.h | 2 +
2 files changed, 87 insertions(+), 1 deletion(-)
@@ -38,6 +38,7 @@
#include <linux/virtio_ring.h>
#include <asm/byteorder.h>
#include <linux/platform_device.h>
+#include <linux/tee_remoteproc.h>
#include "remoteproc_internal.h"
@@ -1493,6 +1494,86 @@ static int rproc_set_rsc_table(struct rproc *rproc)
return 0;
}
+/*
+ * Alternative method to load a firmware and boot a remote processor with it.
+ * Similar to rproc_fw_boot but the resource table is obtained and parsed only after loading the
+ * firmware.
+ */
+static int rproc_alt_fw_boot(struct rproc *rproc, const struct firmware *fw)
+{
+ struct device *dev = &rproc->dev;
+ const char *name = rproc->firmware;
+ int ret;
+
+ dev_info(dev, "Booting a private format image %s, size %zd\n", name, fw->size);
+
+ /*
+ * if enabling an IOMMU isn't relevant for this rproc, this is
+ * just a nop
+ */
+ ret = rproc_enable_iommu(rproc);
+ if (ret) {
+ dev_err(dev, "can't enable iommu: %d\n", ret);
+ return ret;
+ }
+
+ /* Prepare rproc for firmware loading if needed */
+ ret = rproc_prepare_device(rproc);
+ if (ret) {
+ dev_err(dev, "can't prepare rproc %s: %d\n", rproc->name, ret);
+ goto disable_iommu;
+ }
+
+ /* load the image to memory */
+ ret = rproc_load_segments(rproc, fw);
+ if (ret) {
+ dev_err(dev, "Failed to load firmware: %d\n", ret);
+ return ret;
+ }
+
+ ret = rproc_set_rsc_table(rproc);
+ if (ret) {
+ dev_err(dev, "can't load resource table: %d\n", ret);
+ goto unprepare_device;
+ }
+
+ /* reset max_notifyid */
+ rproc->max_notifyid = -1;
+
+ /* reset handled vdev */
+ rproc->nb_vdev = 0;
+
+ /* handle fw resources which are required to boot rproc */
+ ret = rproc_handle_resources(rproc, rproc_loading_handlers);
+ if (ret) {
+ dev_err(dev, "Failed to process resources: %d\n", ret);
+ goto clean_up_resources;
+ }
+
+ /* Allocate carveout resources associated to rproc */
+ ret = rproc_alloc_registered_carveouts(rproc);
+ if (ret) {
+ dev_err(dev, "Failed to allocate associated carveouts: %d\n",
+ ret);
+ goto clean_up_resources;
+ }
+
+ ret = rproc_start(rproc, fw);
+ if (ret)
+ goto clean_up_resources;
+
+ return 0;
+
+clean_up_resources:
+ rproc_resource_cleanup(rproc);
+unprepare_device:
+ /* release HW resources if needed */
+ rproc_unprepare_device(rproc);
+disable_iommu:
+ rproc_disable_iommu(rproc);
+ return ret;
+}
+
static int rproc_reset_rsc_table_on_detach(struct rproc *rproc)
{
struct resource_table *table_ptr;
@@ -1957,7 +2038,10 @@ int rproc_boot(struct rproc *rproc)
goto downref_rproc;
}
- ret = rproc_fw_boot(rproc, firmware_p);
+ if (rproc->alt_boot)
+ ret = rproc_alt_fw_boot(rproc, firmware_p);
+ else
+ ret = rproc_fw_boot(rproc, firmware_p);
release_firmware(firmware_p);
}
@@ -544,6 +544,7 @@ enum rproc_features {
* @elf_machine: firmware ELF machine
* @cdev: character device of the rproc
* @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release
+ * @alt_boot flag to indicate if remoteproc should use the alternate boot method.
* @features: indicate remoteproc features
*/
struct rproc {
@@ -585,6 +586,7 @@ struct rproc {
u16 elf_machine;
struct cdev cdev;
bool cdev_put_on_release;
+ bool alt_boot;
DECLARE_BITMAP(features, RPROC_MAX_FEATURES);
};