[v1,1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
Commit Message
We are not supposed to spread quirks in 8250_port module especially
when we have a separate driver for the hardware in question.
Move quirk from generic module to the driver that uses it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/tty/serial/8250/8250_of.c | 38 +++++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_port.c | 24 ------------------
2 files changed, 38 insertions(+), 24 deletions(-)
@@ -5,6 +5,7 @@
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
*/
#include <linux/console.h>
+#include <linux/math.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
@@ -25,6 +26,36 @@ struct of_serial_info {
int line;
};
+/* Nuvoton NPCM timeout register */
+#define UART_NPCM_TOR 7
+#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */
+
+static int npcm_startup(struct uart_port *port)
+{
+ /*
+ * Nuvoton calls the scratch register 'UART_TOR' (timeout
+ * register). Enable it, and set TIOC (timeout interrupt
+ * comparator) to be 0x20 for correct operation.
+ */
+ serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
+
+ return serial8250_do_startup(port);
+}
+
+/* Nuvoton NPCM UARTs have a custom divisor calculation */
+static unsigned int npcm_get_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int *frac)
+{
+ return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
+}
+
+static int npcm_setup(struct uart_port *port)
+{
+ port->get_divisor = npcm_get_divisor;
+ port->startup = npcm_startup;
+ return 0;
+}
+
/*
* Fill a struct uart_port for a given device node
*/
@@ -167,6 +198,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (ret)
goto err_pmruntime;
break;
+ case PORT_NPCM:
+ ret = npcm_setup(port);
+ if (ret)
+ goto err_pmruntime;
+ break;
+ default:
+ break;
}
if (IS_REACHABLE(CONFIG_SERIAL_8250_FSL) &&
@@ -38,10 +38,6 @@
#include "8250.h"
-/* Nuvoton NPCM timeout register */
-#define UART_NPCM_TOR 7
-#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */
-
/*
* Debugging.
*/
@@ -2235,15 +2231,6 @@ int serial8250_do_startup(struct uart_port *port)
UART_DA830_PWREMU_MGMT_FREE);
}
- if (port->type == PORT_NPCM) {
- /*
- * Nuvoton calls the scratch register 'UART_TOR' (timeout
- * register). Enable it, and set TIOC (timeout interrupt
- * comparator) to be 0x20 for correct operation.
- */
- serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
- }
-
#ifdef CONFIG_SERIAL_8250_RSA
/*
* If this is an RSA port, see if we can kick it up to the
@@ -2545,15 +2532,6 @@ static void serial8250_shutdown(struct uart_port *port)
serial8250_do_shutdown(port);
}
-/* Nuvoton NPCM UARTs have a custom divisor calculation */
-static unsigned int npcm_get_divisor(struct uart_8250_port *up,
- unsigned int baud)
-{
- struct uart_port *port = &up->port;
-
- return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
-}
-
static unsigned int serial8250_do_get_divisor(struct uart_port *port,
unsigned int baud,
unsigned int *frac)
@@ -2598,8 +2576,6 @@ static unsigned int serial8250_do_get_divisor(struct uart_port *port,
quot = 0x8001;
else if (magic_multiplier && baud >= port->uartclk / 12)
quot = 0x8002;
- else if (up->port.type == PORT_NPCM)
- quot = npcm_get_divisor(up, baud);
else
quot = uart_get_divisor(port, baud);