diff mbox series

[v2,2/2] dt-bindings: auxdisplay: hit,hd44780: use defines for GPIO flags

Message ID 20240214155438.155139-2-krzysztof.kozlowski@linaro.org
State New
Headers
Series [v2,1/2] dt-bindings: auxdisplay: adjust example indentation and use generic node names |

Commit Message

Krzysztof Kozlowski Feb. 14, 2024, 3:54 p.m. UTC 
  Improve example DTS readability by using known defines for GPIO flags.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---

Changes in v2:
1. None
---
 .../bindings/auxdisplay/hit,hd44780.yaml         | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Andy Shevchenko Feb. 14, 2024, 5:37 p.m. UTC | #1 
On Wed, Feb 14, 2024 at 04:54:38PM +0100, Krzysztof Kozlowski wrote:
> Improve example DTS readability by using known defines for GPIO flags.

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index e26d61af9011..3ca0e9863d83 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -116,12 +116,12 @@  examples:
         compatible = "hit,hd44780";
         display-height-chars = <2>;
         display-width-chars = <16>;
-        data-gpios = <&pcf8574 4 0>,
-                     <&pcf8574 5 0>,
-                     <&pcf8574 6 0>,
-                     <&pcf8574 7 0>;
-        enable-gpios = <&pcf8574 2 0>;
-        rs-gpios = <&pcf8574 0 0>;
-        rw-gpios = <&pcf8574 1 0>;
-        backlight-gpios = <&pcf8574 3 0>;
+        data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 5 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 6 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 7 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>;
+        rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>;
+        backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>;
     };