This adds common1 register space for AM62x, AM62A and AM65x SoC's which are
using TI's Keystone display hardware and supporting it as described in
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
---
V2: Add common1 region for AM62A SoC too
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++--
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 5 +++--
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +++--
3 files changed, 9 insertions(+), 6 deletions(-)
@@ -779,9 +779,10 @@ dss: dss@30200000 {
<0x00 0x30207000 0x00 0x1000>, /* ovr1 */
<0x00 0x30208000 0x00 0x1000>, /* ovr2 */
<0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
- <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+ <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+ <0x00 0x30201000 0x00 0x1000>; /* common1 */
reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2";
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 186 6>,
<&dss_vp1_clk>,
@@ -994,9 +994,10 @@ dss: dss@30200000 {
<0x00 0x30207000 0x00 0x1000>, /* ovr1 */
<0x00 0x30208000 0x00 0x1000>, /* ovr2 */
<0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */
- <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+ <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+ <0x00 0x30201000 0x00 0x1000>; /* common1 */
reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2";
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 186 6>,
<&k3_clks 186 0>,
@@ -991,9 +991,10 @@ dss: dss@4a00000 {
<0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
<0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
<0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
- <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+ <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */
+ <0x0 0x04a01000 0x0 0x1000>; /* common1 */
reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2";
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;