@@ -561,7 +561,6 @@ sdhci0: mmc@fa10000 {
assigned-clock-parents = <&k3_clks 57 8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- ti,trm-icp = <0x2>;
bus-width = <8>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
@@ -580,7 +579,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -604,7 +602,6 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -317,7 +317,6 @@ serial_flash: flash@0 {
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
non-removable;
status = "okay";
@@ -185,7 +185,6 @@ &ospi0 {
/* Verdin SD_1 */
&sdhci1 {
- ti,driver-strength-ohm = <33>;
status = "okay";
};
@@ -206,7 +206,6 @@ &ospi0 {
/* Verdin SD_1 */
&sdhci1 {
- ti,driver-strength-ohm = <33>;
status = "okay";
};
@@ -26,7 +26,6 @@ &sdhci2 {
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
ti,fails-without-test-cd;
- ti,driver-strength-ohm = <50>;
vmmc-supply = <®_3v3>;
status = "okay";
};
@@ -1407,7 +1407,6 @@ &sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci0>;
non-removable;
- ti,driver-strength-ohm = <50>;
status = "okay";
};
@@ -1416,7 +1415,6 @@ &sdhci1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci1>;
disable-wp;
- ti,driver-strength-ohm = <50>;
vmmc-supply = <®_sdhc1_vmmc>;
vqmmc-supply = <®_sdhc1_vqmmc>;
status = "disabled";
@@ -819,7 +819,6 @@ &sdhci0 {
bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
status = "okay";
};
@@ -832,7 +831,6 @@ &sdhci1 {
vmmc-supply = <&vdd_3v3_sd>;
vqmmc-supply = <&vdd_sd_dv>;
- ti,driver-strength-ohm = <50>;
disable-wp;
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
cd-debounce-delay-ms = <100>;
@@ -849,7 +847,6 @@ &sdhci2 {
ti,fails-without-test-cd;
cap-power-off-card;
keep-power-in-suspend;
- ti,driver-strength-ohm = <50>;
assigned-clocks = <&k3_clks 157 158>;
assigned-clock-parents = <&k3_clks 157 160>;
#address-cells = <1>;
@@ -334,7 +334,6 @@ &sdhci1 {
vqmmc-supply = <&vddshv5_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
no-1-8-v;
status = "okay";
@@ -561,7 +561,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -582,7 +582,6 @@ &sdhci1 {
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -422,7 +422,6 @@ &sdhci1 {
vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
bootph-all;
};
@@ -411,7 +411,6 @@ &sdhci0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -421,7 +420,6 @@ &sdhci1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -646,7 +646,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -508,7 +508,6 @@ &sdhci1 {
pinctrl-names = "default";
bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -292,7 +292,6 @@ &sdhci1 {
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
bus-width = <4>;
- ti,driver-strength-ohm = <50>;
disable-wp;
no-1-8-v;
};
@@ -471,7 +471,6 @@ &sdhci1 {
pinctrl-names = "default";
bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -422,7 +422,6 @@ &sdhci1 {
cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>;
disable-wp;
no-mmc;
- ti,driver-strength-ohm = <50>;
ti,fails-without-test-cd;
/* Enabled by overlay */
};