diff mbox series

[14/30] x86/cpu/topology: Rework possible CPU management

Message ID 20240213210252.290098853@linutronix.de
State New
Headers
Series x86/apic: Rework APIC registration |

Commit Message

Thomas Gleixner Feb. 13, 2024, 9:05 p.m. UTC 
  From: Thomas Gleixner <tglx@linutronix.de>

Managing possible CPUs is an unreadable and uncomprehensible maze. Aside of
that it's backwards because it applies command line limits after
registering all APICs.

Rewrite it so that it:

  - Applies the command line limits upfront so that only the allowed amount
    of APIC IDs can be registered.

  - Applies eventual late restrictions in an understandable way

  - Uses simple min_t() calculations which are trivial to follow.

  - Provides a separate function for resetting to UP mode late in the
    bringup process.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>


---
 arch/x86/include/asm/apic.h     |    5 +
 arch/x86/include/asm/cpu.h      |   10 --
 arch/x86/include/asm/topology.h |    1 
 arch/x86/kernel/cpu/topology.c  |  176 ++++++++++++++++++++++++----------------
 arch/x86/kernel/setup.c         |    9 --
 arch/x86/kernel/smpboot.c       |    6 -
 6 files changed, 118 insertions(+), 89 deletions(-)
---
diff mbox series

Patch

--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -175,6 +175,9 @@  extern void topology_register_apic(u32 a
 extern void topology_register_boot_apic(u32 apic_id);
 extern int topology_hotplug_apic(u32 apic_id, u32 acpi_id);
 extern void topology_hotunplug_apic(unsigned int cpu);
+extern void topology_apply_cmdline_limits_early(void);
+extern void topology_init_possible_cpus(void);
+extern void topology_reset_possible_cpus_up(void);
 
 #else /* !CONFIG_X86_LOCAL_APIC */
 static inline void lapic_shutdown(void) { }
@@ -190,6 +193,8 @@  static inline void apic_intr_mode_init(v
 static inline void lapic_assign_system_vectors(void) { }
 static inline void lapic_assign_legacy_vector(unsigned int i, bool r) { }
 static inline bool apic_needs_pit(void) { return true; }
+static inline void topology_apply_cmdline_limits_early(void) { }
+static inline void topology_init_possible_cpus(void) { }
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_X2APIC
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -9,18 +9,10 @@ 
 #include <linux/percpu.h>
 #include <asm/ibt.h>
 
-#ifdef CONFIG_SMP
-
-extern void prefill_possible_map(void);
-
-#else /* CONFIG_SMP */
-
-static inline void prefill_possible_map(void) {}
-
+#ifndef CONFIG_SMP
 #define cpu_physical_id(cpu)			boot_cpu_physical_apicid
 #define cpu_acpi_id(cpu)			0
 #define safe_smp_processor_id()			0
-
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_HOTPLUG_CPU
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -191,6 +191,7 @@  static inline bool topology_is_primary_t
 {
 	return cpumask_test_cpu(cpu, cpu_primary_thread_mask);
 }
+
 #else /* CONFIG_SMP */
 #define topology_max_packages()			(1)
 static inline int
--- a/arch/x86/kernel/cpu/topology.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -5,6 +5,7 @@ 
 #include <xen/xen.h>
 
 #include <asm/apic.h>
+#include <asm/io_apic.h>
 #include <asm/mpspec.h>
 #include <asm/smp.h>
 
@@ -85,73 +86,6 @@  early_initcall(smp_init_primary_thread_m
 static inline void cpu_mark_primary_thread(unsigned int cpu, unsigned int apicid) { }
 #endif
 
-static int __initdata setup_possible_cpus = -1;
-
-/*
- * cpu_possible_mask should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and don't expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_mask on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * - Ashok Raj
- *
- * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
- * - The user can overwrite it with possible_cpus=NUM
- * - Otherwise don't reserve additional CPUs.
- * We do this because additional CPUs waste a lot of memory.
- * -AK
- */
-__init void prefill_possible_map(void)
-{
-	unsigned int num_processors = topo_info.nr_assigned_cpus;
-	unsigned int disabled_cpus = topo_info.nr_disabled_cpus;
-	int i, possible;
-
-	i = setup_max_cpus ?: 1;
-	if (setup_possible_cpus == -1) {
-		possible = topo_info.nr_assigned_cpus;
-#ifdef CONFIG_HOTPLUG_CPU
-		if (setup_max_cpus)
-			possible += num_processors;
-#else
-		if (possible > i)
-			possible = i;
-#endif
-	} else
-		possible = setup_possible_cpus;
-
-	total_cpus = max_t(int, possible, num_processors + disabled_cpus);
-
-	/* nr_cpu_ids could be reduced via nr_cpus= */
-	if (possible > nr_cpu_ids) {
-		pr_warn("%d Processors exceeds NR_CPUS limit of %u\n",
-			possible, nr_cpu_ids);
-		possible = nr_cpu_ids;
-	}
-
-#ifdef CONFIG_HOTPLUG_CPU
-	if (!setup_max_cpus)
-#endif
-	if (possible > i) {
-		pr_warn("%d Processors exceeds max_cpus limit of %u\n",
-			possible, setup_max_cpus);
-		possible = i;
-	}
-
-	set_nr_cpu_ids(possible);
-
-	pr_info("Allowing %d CPUs, %d hotplug CPUs\n",
-		possible, max_t(int, possible - num_processors, 0));
-
-	reset_cpu_possible_mask();
-
-	for (i = 0; i < possible; i++)
-		set_cpu_possible(i, true);
-}
-
 static int topo_lookup_cpuid(u32 apic_id)
 {
 	int i;
@@ -293,12 +227,114 @@  void topology_hotunplug_apic(unsigned in
 }
 #endif
 
-static int __init _setup_possible_cpus(char *str)
+#ifdef CONFIG_SMP
+static unsigned int max_possible_cpus __initdata = NR_CPUS;
+
+/**
+ * topology_apply_cmdline_limits_early - Apply topology command line limits early
+ *
+ * Ensure that command line limits are in effect before firmware parsing
+ * takes place.
+ */
+void __init topology_apply_cmdline_limits_early(void)
+{
+	unsigned int possible = nr_cpu_ids;
+
+	/* 'maxcpus=0' 'nosmp' 'nolapic' 'disableapic' 'noapic' */
+	if (!setup_max_cpus || ioapic_is_disabled || apic_is_disabled)
+		possible = 1;
+
+	/* 'possible_cpus=N' */
+	possible = min_t(unsigned int, max_possible_cpus, possible);
+
+	if (possible < nr_cpu_ids) {
+		pr_info("Limiting to %u possible CPUs\n", possible);
+		set_nr_cpu_ids(possible);
+	}
+}
+
+static __init bool restrict_to_up(void)
+{
+	if (!smp_found_config || ioapic_is_disabled)
+		return true;
+	/*
+	 * XEN PV is special as it does not advertise the local APIC
+	 * properly, but provides a fake topology for it so that the
+	 * infrastructure works. So don't apply the restrictions vs. APIC
+	 * here.
+	 */
+	if (xen_pv_domain())
+		return false;
+
+	return apic_is_disabled;
+}
+
+void __init topology_init_possible_cpus(void)
+{
+	unsigned int assigned = topo_info.nr_assigned_cpus;
+	unsigned int disabled = topo_info.nr_disabled_cpus;
+	unsigned int total = assigned + disabled;
+	unsigned int cpu, allowed = 1;
+
+	if (!restrict_to_up()) {
+		if (WARN_ON_ONCE(assigned > nr_cpu_ids)) {
+			disabled += assigned - nr_cpu_ids;
+			assigned = nr_cpu_ids;
+		}
+		allowed = min_t(unsigned int, total, nr_cpu_ids);
+	}
+
+	if (total > allowed)
+		pr_warn("%u possible CPUs exceed the limit of %u\n", total, allowed);
+
+	assigned = min_t(unsigned int, allowed, assigned);
+	disabled = allowed - assigned;
+
+	topo_info.nr_assigned_cpus = assigned;
+	topo_info.nr_disabled_cpus = disabled;
+
+	total_cpus = allowed;
+	set_nr_cpu_ids(allowed);
+
+	pr_info("Allowing %u present CPUs plus %u hotplug CPUs\n", assigned, disabled);
+	if (topo_info.nr_rejected_cpus)
+		pr_info("Rejected CPUs %u\n", topo_info.nr_rejected_cpus);
+
+	init_cpu_present(cpumask_of(0));
+	init_cpu_possible(cpumask_of(0));
+
+	for (cpu = 0; cpu < allowed; cpu++) {
+		u32 apicid = cpuid_to_apicid[cpu];
+
+		set_cpu_possible(cpu, true);
+
+		if (apicid == BAD_APICID)
+			continue;
+
+		set_cpu_present(cpu, test_bit(apicid, phys_cpu_present_map));
+	}
+}
+
+/*
+ * Late SMP disable after sizing CPU masks when APIC/IOAPIC setup failed.
+ */
+void __init topology_reset_possible_cpus_up(void)
 {
-	get_option(&str, &setup_possible_cpus);
+	init_cpu_present(cpumask_of(0));
+	init_cpu_possible(cpumask_of(0));
+
+	bitmap_zero(phys_cpu_present_map, MAX_LOCAL_APIC);
+	if (topo_info.boot_cpu_apic_id != BAD_APICID)
+		set_bit(topo_info.boot_cpu_apic_id, phys_cpu_present_map);
+}
+
+static int __init setup_possible_cpus(char *str)
+{
+	get_option(&str, &max_possible_cpus);
 	return 0;
 }
-early_param("possible_cpus", _setup_possible_cpus);
+early_param("possible_cpus", setup_possible_cpus);
+#endif
 
 static int __init apic_set_disabled_cpu_apicid(char *arg)
 {
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1131,6 +1131,8 @@  void __init setup_arch(char **cmdline_p)
 
 	early_quirks();
 
+	topology_apply_cmdline_limits_early();
+
 	/*
 	 * Parse SMP configuration. Try ACPI first and then the platform
 	 * specific parser.
@@ -1138,13 +1140,10 @@  void __init setup_arch(char **cmdline_p)
 	acpi_boot_init();
 	x86_init.mpparse.parse_smp_cfg();
 
-	/*
-	 * Systems w/o ACPI and mptables might not have it mapped the local
-	 * APIC yet, but prefill_possible_map() might need to access it.
-	 */
+	/* Last opportunity to detect and map the local APIC */
 	init_apic_mappings();
 
-	prefill_possible_map();
+	topology_init_possible_cpus();
 
 	init_cpu_to_node();
 	init_gi_nodes();
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1147,11 +1147,7 @@  static __init void disable_smp(void)
 	pr_info("SMP disabled\n");
 
 	disable_ioapic_support();
-
-	init_cpu_present(cpumask_of(0));
-	init_cpu_possible(cpumask_of(0));
-
-	reset_phys_cpu_present_map(smp_found_config ? boot_cpu_physical_apicid : 0);
+	topology_reset_possible_cpus_up();
 
 	cpumask_set_cpu(0, topology_sibling_cpumask(0));
 	cpumask_set_cpu(0, topology_core_cpumask(0));