[v4,8/8] ARM: dts: microchip: sama5d2_xplained: Add power-supply property for sdmmc0 node

Message ID 20240213145542.23207-9-mihai.sain@microchip.com
State New
Headers
Series Add power-supply properties for sdmmc nodes on Microchip boards |

Commit Message

Mihai Sain Feb. 13, 2024, 2:55 p.m. UTC
  In order to avoid the issues from the tuning procedure required by
the UHS cards, keep the vqmmc at 3V3 to use the sd high-speed mode.
Add vmmc-supply and vqmmc-supply properties to sdmmc0 node.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts | 2 ++
 1 file changed, 2 insertions(+)
  

Patch

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 6680031387e8..9b7e56790a5a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -67,6 +67,8 @@  sdmmc0: sdio-host@a0000000 {
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			non-removable;
 			mmc-ddr-3_3v;
+			vmmc-supply = <&vdd_3v3_reg>;
+			vqmmc-supply = <&vdd_3v3_reg>;
 			status = "okay";
 		};