[v4,4/8] ARM: dts: microchip: sama5d27_wlsom1: Add power-supply property for sdmmc1 node

Message ID 20240213145542.23207-5-mihai.sain@microchip.com
State New
Headers
Series Add power-supply properties for sdmmc nodes on Microchip boards |

Commit Message

Mihai Sain Feb. 13, 2024, 2:55 p.m. UTC
  In order to avoid the issues from the tuning procedure required by
the UHS cards, keep the vqmmc at 3V3 to use the sd high-speed mode.
Add vmmc-supply and vqmmc-supply properties to sdmmc1 node.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi | 2 ++
 1 file changed, 2 insertions(+)
  

Patch

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index 4617805c7748..96819ea24cbd 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -368,6 +368,8 @@  &sdmmc1 {
 	no-1-8-v;
 	non-removable;
 	bus-width = <4>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
 	status = "okay";
 
 	wilc: wifi@0 {