[v3] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts
Commit Message
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
supported by the IRQC block, reflect the same in DT binding doc.
- R9A07G043U - RZ/G2UL
- R9A07G044L/R9A07G044LC - RZ/{G2L,G2LC}
- R9A07G054 - RZ/V2L
- R9A08G045 - RZ/G3S
For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
interrupt so we just use the below to represent them:
- ec7tie1-0
- ec7tie2-0
- ec7tiovf-0
Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
support these interrupts. Therefore, mark the 'interrupt-names' property
as required for all the SoCs and update the example node in the binding
document.
Fixes: 96fed779d3d4 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Fixes: 1cf0697a24ef ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v2 -> v3:
- Fixed IRQ description as pointed by Geert
- Sending this individual patch as DTSI patches have been Reviewed by Geert
v1 -> v2:
- Fixed review comments pointed by Conor
v1: https://patchwork.kernel.org/project/linux-renesas-soc/patch/20240202093907.9465-2-prabhakar.mahadev-lad.rj@bp.renesas.com/
---
.../renesas,rzg2l-irqc.yaml | 44 +++++++++++++++----
1 file changed, 35 insertions(+), 9 deletions(-)
Comments
On Tue, Feb 13, 2024 at 9:59 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
> supported by the IRQC block, reflect the same in DT binding doc.
>
> - R9A07G043U - RZ/G2UL
> - R9A07G044L/R9A07G044LC - RZ/{G2L,G2LC}
> - R9A07G054 - RZ/V2L
> - R9A08G045 - RZ/G3S
>
> For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
> interrupt so we just use the below to represent them:
> - ec7tie1-0
> - ec7tie2-0
> - ec7tiovf-0
>
> Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
> were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
> SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
> support these interrupts. Therefore, mark the 'interrupt-names' property
> as required for all the SoCs and update the example node in the binding
> document.
>
> Fixes: 96fed779d3d4 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
> Fixes: 1cf0697a24ef ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v2 -> v3:
> - Fixed IRQ description as pointed by Geert
> - Sending this individual patch as DTSI patches have been Reviewed by Geert
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
On Tue, Feb 13, 2024 at 08:59:12AM +0000, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
> supported by the IRQC block, reflect the same in DT binding doc.
>
> - R9A07G043U - RZ/G2UL
> - R9A07G044L/R9A07G044LC - RZ/{G2L,G2LC}
> - R9A07G054 - RZ/V2L
> - R9A08G045 - RZ/G3S
>
> For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
> interrupt so we just use the below to represent them:
> - ec7tie1-0
> - ec7tie2-0
> - ec7tiovf-0
>
> Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
> were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
> SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
> support these interrupts. Therefore, mark the 'interrupt-names' property
> as required for all the SoCs and update the example node in the binding
> document.
>
> Fixes: 96fed779d3d4 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
> Fixes: 1cf0697a24ef ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
On Tue, 13 Feb 2024 08:59:12 +0000, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
> supported by the IRQC block, reflect the same in DT binding doc.
>
> - R9A07G043U - RZ/G2UL
> - R9A07G044L/R9A07G044LC - RZ/{G2L,G2LC}
> - R9A07G054 - RZ/V2L
> - R9A08G045 - RZ/G3S
>
> For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
> interrupt so we just use the below to represent them:
> - ec7tie1-0
> - ec7tie2-0
> - ec7tiovf-0
>
> Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
> were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
> SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
> support these interrupts. Therefore, mark the 'interrupt-names' property
> as required for all the SoCs and update the example node in the binding
> document.
>
> Fixes: 96fed779d3d4 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
> Fixes: 1cf0697a24ef ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v2 -> v3:
> - Fixed IRQ description as pointed by Geert
> - Sending this individual patch as DTSI patches have been Reviewed by Geert
>
> v1 -> v2:
> - Fixed review comments pointed by Conor
>
> v1: https://patchwork.kernel.org/project/linux-renesas-soc/patch/20240202093907.9465-2-prabhakar.mahadev-lad.rj@bp.renesas.com/
> ---
> .../renesas,rzg2l-irqc.yaml | 44 +++++++++++++++----
> 1 file changed, 35 insertions(+), 9 deletions(-)
>
Applied, thanks!
@@ -44,7 +44,7 @@ properties:
maxItems: 1
interrupts:
- minItems: 41
+ minItems: 45
items:
- description: NMI interrupt
- description: IRQ0 interrupt
@@ -88,9 +88,15 @@ properties:
- description: GPIO interrupt, TINT30
- description: GPIO interrupt, TINT31
- description: Bus error interrupt
+ - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt
+ - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt
+ - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt
+ - description: ECCRAM1 1bit error interrupt
+ - description: ECCRAM1 2bit error interrupt
+ - description: ECCRAM1 error overflow interrupt
interrupt-names:
- minItems: 41
+ minItems: 45
items:
- const: nmi
- const: irq0
@@ -134,6 +140,12 @@ properties:
- const: tint30
- const: tint31
- const: bus-err
+ - const: ec7tie1-0
+ - const: ec7tie2-0
+ - const: ec7tiovf-0
+ - const: ec7tie1-1
+ - const: ec7tie2-1
+ - const: ec7tiovf-1
clocks:
maxItems: 2
@@ -156,6 +168,7 @@ required:
- interrupt-controller
- reg
- interrupts
+ - interrupt-names
- clocks
- clock-names
- power-domains
@@ -169,16 +182,19 @@ allOf:
compatible:
contains:
enum:
- - renesas,r9a07g043u-irqc
- renesas,r9a08g045-irqc
then:
properties:
interrupts:
- minItems: 42
+ maxItems: 45
interrupt-names:
- minItems: 42
- required:
- - interrupt-names
+ maxItems: 45
+ else:
+ properties:
+ interrupts:
+ minItems: 48
+ interrupt-names:
+ minItems: 48
unevaluatedProperties: false
@@ -233,7 +249,14 @@ examples:
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "nmi",
"irq0", "irq1", "irq2", "irq3",
"irq4", "irq5", "irq6", "irq7",
@@ -244,7 +267,10 @@ examples:
"tint16", "tint17", "tint18", "tint19",
"tint20", "tint21", "tint22", "tint23",
"tint24", "tint25", "tint26", "tint27",
- "tint28", "tint29", "tint30", "tint31";
+ "tint28", "tint29", "tint30", "tint31",
+ "bus-err", "ec7tie1-0", "ec7tie2-0",
+ "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+ "ec7tiovf-1";
clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
<&cpg CPG_MOD R9A07G044_IA55_PCLK>;
clock-names = "clk", "pclk";