[v2,03/17] ASoC: dt-bindings: fsl,imx-asrc: convert to YAML

Message ID 20240213010347.1075251-4-sre@kernel.org
State New
Headers
Series UNI-T UTi260B support |

Commit Message

Sebastian Reichel Feb. 13, 2024, 1 a.m. UTC
  Convert the i.MX ASRC DT binding to YAML.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 .../devicetree/bindings/sound/fsl,asrc.txt    |  80 ---------
 .../bindings/sound/fsl,imx-asrc.yaml          | 162 ++++++++++++++++++
 2 files changed, 162 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/fsl,asrc.txt
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
  

Comments

Krzysztof Kozlowski Feb. 13, 2024, 12:23 p.m. UTC | #1
On 13/02/2024 02:00, Sebastian Reichel wrote:
> Convert the i.MX ASRC DT binding to YAML.
> 
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
>  .../devicetree/bindings/sound/fsl,asrc.txt    |  80 ---------
>  .../bindings/sound/fsl,imx-asrc.yaml          | 162 ++++++++++++++++++
>  2 files changed, 162 insertions(+), 80 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/fsl,asrc.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
  

Patch

diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
deleted file mode 100644
index 998b4c8a7f78..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ /dev/null
@@ -1,80 +0,0 @@ 
-Freescale Asynchronous Sample Rate Converter (ASRC) Controller
-
-The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
-signal associated with an input clock into a signal associated with a different
-output clock. The driver currently works as a Front End of DPCM with other Back
-Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
-three substreams within totally 10 channels.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-asrc",
-			  "fsl,imx53-asrc",
-			  "fsl,imx8qm-asrc",
-			  "fsl,imx8qxp-asrc",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Contains the following entries
-	"mem"		  Peripheral access clock to access registers.
-	"ipg"		  Peripheral clock to driver module.
-	"asrck_<0-f>"	  Clock sources for input and output clock.
-	"spba"		  The spba clock is required when ASRC is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
-
-   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
-
-   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
-			  by imx8qm/imx8qxp platform
-			  <0> - select the map for asrc0 in imx8qm/imx8qxp
-			  <1> - select the map for asrc1 in imx8qm/imx8qxp
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the little endian mode
-			  will be in use as default. Otherwise, the big endian
-			  mode will be in use for all the device registers.
-
-   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
-			  Ends, which can replace the fsl,asrc-width.
-			  The value is 2 (S16_LE), or 6 (S24_LE).
-
-Example:
-
-asrc: asrc@2034000 {
-	compatible = "fsl,imx53-asrc";
-	reg = <0x02034000 0x4000>;
-	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 107>, <&clks 0>, <&clks 0>;
-	clock-names = "mem", "ipg", "asrck0",
-		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-		"asrck_d", "asrck_e", "asrck_f";
-	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-	dma-names = "rxa", "rxb", "rxc",
-		"txa", "txb", "txc";
-	fsl,asrc-rate  = <48000>;
-	fsl,asrc-width = <16>;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
new file mode 100644
index 000000000000..bfef2fcb75b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -0,0 +1,162 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+description:
+  The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
+  a signal associated with an input clock into a signal associated with a
+  different output clock. The driver currently works as a Front End of DPCM
+  with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
+  three pairs to support three substreams within totally 10 channels.
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx35-asrc
+          - fsl,imx53-asrc
+          - fsl,imx8qm-asrc
+          - fsl,imx8qxp-asrc
+      - items:
+          - enum:
+              - fsl,imx6sx-asrc
+              - fsl,imx6ul-asrc
+          - const: fsl,imx53-asrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 6
+
+  dma-names:
+    items:
+      - const: rxa
+      - const: rxb
+      - const: rxc
+      - const: txa
+      - const: txb
+      - const: txc
+
+  clocks:
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: mem
+      - const: ipg
+      - const: asrck_0
+      - const: asrck_1
+      - const: asrck_2
+      - const: asrck_3
+      - const: asrck_4
+      - const: asrck_5
+      - const: asrck_6
+      - const: asrck_7
+      - const: asrck_8
+      - const: asrck_9
+      - const: asrck_a
+      - const: asrck_b
+      - const: asrck_c
+      - const: asrck_d
+      - const: asrck_e
+      - const: asrck_f
+      - const: spba
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample width used by DPCM Back Ends
+    enum: [16, 24]
+
+  fsl,asrc-clk-map:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines clock map used in driver
+      <0> - select the map for asrc0 in imx8qm/imx8qxp
+      <1> - select the map for asrc1 in imx8qm/imx8qxp
+    enum: [0, 1]
+
+  big-endian:
+    type: boolean
+    description:
+      If this property is absent, the little endian mode will be in use as
+      default. Otherwise, the big endian mode will be in use for all the
+      device registers.
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines a mutual sample format used by DPCM Back Ends, which can
+      replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
+    enum: [2, 6]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - fsl,asrc-rate
+  - fsl,asrc-width
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-asrc
+              - fsl,imx8qxp-asrc
+    then:
+      required:
+        - fsl,asrc-clk-map
+    else:
+      properties:
+        fsl,asrc-clk-map: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    asrc: asrc@2034000 {
+        compatible = "fsl,imx53-asrc";
+        reg = <0x02034000 0x4000>;
+        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_SPBA>;
+        clock-names = "mem", "ipg", "asrck_0",
+                "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+                "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+                "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+                "asrck_d", "asrck_e", "asrck_f", "spba";
+        dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+        dma-names = "rxa", "rxb", "rxc",
+                    "txa", "txb", "txc";
+        fsl,asrc-rate  = <48000>;
+        fsl,asrc-width = <16>;
+    };