spi: omap2-mcspi: Revert FIFO support without DMA
Commit Message
MCSPI controller have few limitations regarding the transaction
size when the FIFO buffer is enabled and the WCNT feature is used
to find the end of word, in this case if WCNT is not a multiple of
the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
generated correctly. In addition to this limitation, few other unknown
sequence of events that causes the FIFO empty status to not reflect the
exact status were found when FIFO is being used without DMA enabled
during extended testing in AM65x platform. Till the exact root cause
is found and fixed, revert the FIFO support without DMA.
See J721E Technical Reference Manual (SPRUI1C), section 12.1.5
for further details: http://www.ti.com/lit/pdf/spruil1
This reverts commit 75223bbea840e125359fc63942b5f93462b474c6.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---
drivers/spi/spi-omap2-mcspi.c | 137 ++--------------------------------
1 file changed, 8 insertions(+), 129 deletions(-)
Comments
On Mon, Feb 12, 2024 at 05:30:49PM +0530, Vaishnav Achath wrote:
> MCSPI controller have few limitations regarding the transaction
> size when the FIFO buffer is enabled and the WCNT feature is used
> to find the end of word, in this case if WCNT is not a multiple of
> the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
> generated correctly. In addition to this limitation, few other unknown
> sequence of events that causes the FIFO empty status to not reflect the
> exact status were found when FIFO is being used without DMA enabled
> during extended testing in AM65x platform. Till the exact root cause
> is found and fixed, revert the FIFO support without DMA.
>
> See J721E Technical Reference Manual (SPRUI1C), section 12.1.5
> for further details: http://www.ti.com/lit/pdf/spruil1
>
> This reverts commit 75223bbea840e125359fc63942b5f93462b474c6.
Please include human readable descriptions of things like commits and
issues being discussed in e-mail in your mails, this makes them much
easier for humans to read especially when they have no internet access.
I do frequently catch up on my mail on flights or while otherwise
travelling so this is even more pressing for me than just being about
making things a bit easier to read.
On Mon, 12 Feb 2024 17:30:49 +0530, Vaishnav Achath wrote:
> MCSPI controller have few limitations regarding the transaction
> size when the FIFO buffer is enabled and the WCNT feature is used
> to find the end of word, in this case if WCNT is not a multiple of
> the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
> generated correctly. In addition to this limitation, few other unknown
> sequence of events that causes the FIFO empty status to not reflect the
> exact status were found when FIFO is being used without DMA enabled
> during extended testing in AM65x platform. Till the exact root cause
> is found and fixed, revert the FIFO support without DMA.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: omap2-mcspi: Revert FIFO support without DMA
commit: e56c671c2272d939d48a66be7e73b92b74c560c2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
@@ -53,8 +53,6 @@
/* per-register bitmasks: */
#define OMAP2_MCSPI_IRQSTATUS_EOW BIT(17)
-#define OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY BIT(0)
-#define OMAP2_MCSPI_IRQSTATUS_RX0_FULL BIT(2)
#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0)
#define OMAP2_MCSPI_MODULCTRL_MS BIT(2)
@@ -293,7 +291,7 @@ static void omap2_mcspi_set_mode(struct spi_controller *ctlr)
}
static void omap2_mcspi_set_fifo(const struct spi_device *spi,
- struct spi_transfer *t, int enable, int dma_enabled)
+ struct spi_transfer *t, int enable)
{
struct spi_controller *ctlr = spi->controller;
struct omap2_mcspi_cs *cs = spi->controller_state;
@@ -314,28 +312,20 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
else
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
- if (dma_enabled)
- wcnt = t->len / bytes_per_word;
- else
- wcnt = 0;
+
+ wcnt = t->len / bytes_per_word;
if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
goto disable_fifo;
xferlevel = wcnt << 16;
if (t->rx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFER;
- if (dma_enabled)
- xferlevel |= (bytes_per_word - 1) << 8;
- else
- xferlevel |= (max_fifo_depth - 1) << 8;
+ xferlevel |= (bytes_per_word - 1) << 8;
}
if (t->tx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFET;
- if (dma_enabled)
- xferlevel |= bytes_per_word - 1;
- else
- xferlevel |= (max_fifo_depth - 1);
+ xferlevel |= bytes_per_word - 1;
}
mcspi_write_reg(ctlr, OMAP2_MCSPI_XFERLEVEL, xferlevel);
@@ -892,113 +882,6 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
return count - c;
}
-static unsigned
-omap2_mcspi_txrx_piofifo(struct spi_device *spi, struct spi_transfer *xfer)
-{
- struct omap2_mcspi_cs *cs = spi->controller_state;
- struct omap2_mcspi *mcspi;
- unsigned int count, c;
- unsigned int iter, cwc;
- int last_request;
- void __iomem *base = cs->base;
- void __iomem *tx_reg;
- void __iomem *rx_reg;
- void __iomem *chstat_reg;
- void __iomem *irqstat_reg;
- int word_len, bytes_per_word;
- u8 *rx;
- const u8 *tx;
-
- mcspi = spi_controller_get_devdata(spi->controller);
- count = xfer->len;
- c = count;
- word_len = cs->word_len;
- bytes_per_word = mcspi_bytes_per_word(word_len);
-
- /*
- * We store the pre-calculated register addresses on stack to speed
- * up the transfer loop.
- */
- tx_reg = base + OMAP2_MCSPI_TX0;
- rx_reg = base + OMAP2_MCSPI_RX0;
- chstat_reg = base + OMAP2_MCSPI_CHSTAT0;
- irqstat_reg = base + OMAP2_MCSPI_IRQSTATUS;
-
- if (c < (word_len >> 3))
- return 0;
-
- rx = xfer->rx_buf;
- tx = xfer->tx_buf;
-
- do {
- /* calculate number of words in current iteration */
- cwc = min((unsigned int)mcspi->fifo_depth / bytes_per_word,
- c / bytes_per_word);
- last_request = cwc != (mcspi->fifo_depth / bytes_per_word);
- if (tx) {
- if (mcspi_wait_for_reg_bit(irqstat_reg,
- OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY) < 0) {
- dev_err(&spi->dev, "TX Empty timed out\n");
- goto out;
- }
- writel_relaxed(OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY, irqstat_reg);
-
- for (iter = 0; iter < cwc; iter++, tx += bytes_per_word) {
- if (bytes_per_word == 1)
- writel_relaxed(*tx, tx_reg);
- else if (bytes_per_word == 2)
- writel_relaxed(*((u16 *)tx), tx_reg);
- else if (bytes_per_word == 4)
- writel_relaxed(*((u32 *)tx), tx_reg);
- }
- }
-
- if (rx) {
- if (!last_request &&
- mcspi_wait_for_reg_bit(irqstat_reg,
- OMAP2_MCSPI_IRQSTATUS_RX0_FULL) < 0) {
- dev_err(&spi->dev, "RX_FULL timed out\n");
- goto out;
- }
- writel_relaxed(OMAP2_MCSPI_IRQSTATUS_RX0_FULL, irqstat_reg);
-
- for (iter = 0; iter < cwc; iter++, rx += bytes_per_word) {
- if (last_request &&
- mcspi_wait_for_reg_bit(chstat_reg,
- OMAP2_MCSPI_CHSTAT_RXS) < 0) {
- dev_err(&spi->dev, "RXS timed out\n");
- goto out;
- }
- if (bytes_per_word == 1)
- *rx = readl_relaxed(rx_reg);
- else if (bytes_per_word == 2)
- *((u16 *)rx) = readl_relaxed(rx_reg);
- else if (bytes_per_word == 4)
- *((u32 *)rx) = readl_relaxed(rx_reg);
- }
- }
-
- if (last_request) {
- if (mcspi_wait_for_reg_bit(chstat_reg,
- OMAP2_MCSPI_CHSTAT_EOT) < 0) {
- dev_err(&spi->dev, "EOT timed out\n");
- goto out;
- }
- if (mcspi_wait_for_reg_bit(chstat_reg,
- OMAP2_MCSPI_CHSTAT_TXFFE) < 0) {
- dev_err(&spi->dev, "TXFFE timed out\n");
- goto out;
- }
- omap2_mcspi_set_enable(spi, 0);
- }
- c -= cwc * bytes_per_word;
- } while (c >= bytes_per_word);
-
-out:
- omap2_mcspi_set_enable(spi, 1);
- return count - c;
-}
-
static u32 omap2_mcspi_calc_divisor(u32 speed_hz, u32 ref_clk_hz)
{
u32 div;
@@ -1323,9 +1206,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
ctlr->cur_msg_mapped &&
ctlr->can_dma(ctlr, spi, t))
- omap2_mcspi_set_fifo(spi, t, 1, 1);
- else if (t->len > OMAP2_MCSPI_MAX_FIFODEPTH)
- omap2_mcspi_set_fifo(spi, t, 1, 0);
+ omap2_mcspi_set_fifo(spi, t, 1);
omap2_mcspi_set_enable(spi, 1);
@@ -1338,8 +1219,6 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
ctlr->cur_msg_mapped &&
ctlr->can_dma(ctlr, spi, t))
count = omap2_mcspi_txrx_dma(spi, t);
- else if (mcspi->fifo_depth > 0)
- count = omap2_mcspi_txrx_piofifo(spi, t);
else
count = omap2_mcspi_txrx_pio(spi, t);
@@ -1352,7 +1231,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
omap2_mcspi_set_enable(spi, 0);
if (mcspi->fifo_depth > 0)
- omap2_mcspi_set_fifo(spi, t, 0, 0);
+ omap2_mcspi_set_fifo(spi, t, 0);
out:
/* Restore defaults if they were overriden */
@@ -1375,7 +1254,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
if (mcspi->fifo_depth > 0 && t)
- omap2_mcspi_set_fifo(spi, t, 0, 0);
+ omap2_mcspi_set_fifo(spi, t, 0);
return status;
}