[4/8] iio: adc: fsl-imx25-gcq: Use for_each_available_child_node_scoped()

Message ID 20240211174237.182947-5-jic23@kernel.org
State New
Headers
Series of: automate of_node_put() - new approach to loops. |

Commit Message

Jonathan Cameron Feb. 11, 2024, 5:42 p.m. UTC
  From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Using automated cleanup reduces chance of an reference count leak
and simplfies the code.

Child nodes should only ever have been considered if they were available
(either status is okay, or it is not defined).

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/fsl-imx25-gcq.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
  

Patch

diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 68c813de0605..1b0003230306 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -199,7 +199,6 @@  static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			       struct mx25_gcq_priv *priv)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct device_node *child;
 	struct device *dev = &pdev->dev;
 	int ret, i;
 
@@ -216,7 +215,7 @@  static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			     MX25_ADCQ_CFG_IN(i) |
 			     MX25_ADCQ_CFG_REFN_NGND2);
 
-	for_each_child_of_node(np, child) {
+	for_each_available_child_of_node_scoped(np, child) {
 		u32 reg;
 		u32 refp = MX25_ADCQ_CFG_REFP_INT;
 		u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
@@ -224,14 +223,12 @@  static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 		ret = of_property_read_u32(child, "reg", &reg);
 		if (ret) {
 			dev_err(dev, "Failed to get reg property\n");
-			of_node_put(child);
 			return ret;
 		}
 
 		if (reg >= MX25_NUM_CFGS) {
 			dev_err(dev,
 				"reg value is greater than the number of available configuration registers\n");
-			of_node_put(child);
 			return -EINVAL;
 		}
 
@@ -243,10 +240,9 @@  static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 		case MX25_ADC_REFP_XP:
 		case MX25_ADC_REFP_YP:
 			ret = mx25_gcq_ext_regulator_setup(&pdev->dev, priv, refp);
-			if (ret) {
-				of_node_put(child);
+			if (ret)
 				return ret;
-			}
+
 			priv->channel_vref_mv[reg] =
 				regulator_get_voltage(priv->vref[refp]);
 			/* Conversion from uV to mV */
@@ -257,7 +253,6 @@  static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			break;
 		default:
 			dev_err(dev, "Invalid positive reference %d\n", refp);
-			of_node_put(child);
 			return -EINVAL;
 		}
 
@@ -270,12 +265,10 @@  static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 
 		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
 			dev_err(dev, "Invalid fsl,adc-refp property value\n");
-			of_node_put(child);
 			return -EINVAL;
 		}
 		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
 			dev_err(dev, "Invalid fsl,adc-refn property value\n");
-			of_node_put(child);
 			return -EINVAL;
 		}