[04/12] spi: s3c64xx: determine the fifo depth only once
Commit Message
Determine the FIFO depth only once, at probe time.
``sdd->fifo_depth`` can be set later on with the FIFO depth
specified in the device tree.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
drivers/spi/spi-s3c64xx.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
@@ -191,6 +191,7 @@ struct s3c64xx_spi_port_config {
* @tx_dma: Local transmit DMA data (e.g. chan and direction)
* @port_conf: Local SPI port configuration data
* @port_id: Port identification number
+ * @fifo_depth: depth of the FIFO.
* @rx_fifomask: SPI_STATUS.RX_FIFO_LVL mask. Shifted mask defining the field's
* length and position.
* @tx_fifomask: SPI_STATUS.TX_FIFO_LVL mask. Shifted mask defining the field's
@@ -214,6 +215,7 @@ struct s3c64xx_spi_driver_data {
struct s3c64xx_spi_dma_data tx_dma;
const struct s3c64xx_spi_port_config *port_conf;
unsigned int port_id;
+ unsigned int fifo_depth;
u32 rx_fifomask;
u32 tx_fifomask;
};
@@ -424,7 +426,7 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host,
struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
if (sdd->rx_dma.ch && sdd->tx_dma.ch)
- return xfer->len > FIFO_DEPTH(sdd);
+ return xfer->len > sdd->fifo_depth;
return false;
}
@@ -548,7 +550,7 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
void __iomem *regs = sdd->regs;
unsigned long val = 1;
u32 status;
- u32 max_fifo = FIFO_DEPTH(sdd);
+ u32 max_fifo = sdd->fifo_depth;
if (timeout_ms)
val = msecs_to_loops(timeout_ms);
@@ -655,7 +657,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
* For any size less than the fifo size the below code is
* executed atleast once.
*/
- loops = xfer->len / FIFO_DEPTH(sdd);
+ loops = xfer->len / sdd->fifo_depth;
buf = xfer->rx_buf;
do {
/* wait for data to be received in the fifo */
@@ -792,7 +794,7 @@ static int s3c64xx_spi_transfer_one(struct spi_controller *host,
struct spi_transfer *xfer)
{
struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
- const unsigned int fifo_len = FIFO_DEPTH(sdd);
+ const unsigned int fifo_len = sdd->fifo_depth;
const void *tx_buf = NULL;
void *rx_buf = NULL;
int target_len = 0, origin_len = 0;
@@ -1261,6 +1263,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
sdd->port_id = pdev->id;
}
+ sdd->fifo_depth = FIFO_DEPTH(sdd);
+
s3c64xx_spi_set_fifomask(sdd);
sdd->cur_bpw = 8;
@@ -1352,7 +1356,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n",
sdd->port_id, host->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n",
- mem_res, FIFO_DEPTH(sdd));
+ mem_res, sdd->fifo_depth);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);