diff mbox series

[17/17] arm64: dts: renesas: r9a09g011: Update #power-domain-cells = <1>

Message ID 20240208124300.2740313-18-claudiu.beznea.uj@bp.renesas.com
State New
Headers
Series clk: renesas: rzg2l: Add support for power domains |

Commit Message

claudiu beznea Feb. 8, 2024, 12:43 p.m. UTC 
  From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Update CPG #power-domain-cells = <1> and move all the IPs to be part of the
always on power domain as the driver has been modified to support multiple
power domains.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 28 +++++++++++-----------
 1 file changed, 14 insertions(+), 14 deletions(-)

Comments

Geert Uytterhoeven Feb. 16, 2024, 2:12 p.m. UTC | #1 
Hi Claudiu,

On Thu, Feb 8, 2024 at 1:44 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Update CPG #power-domain-cells = <1> and move all the IPs to be part of the
> always on power domain as the driver has been modified to support multiple
> power domains.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

As RZ/V2M uses the Internal Power Domain Controller (PMC), which
is not yet supported by the driver, I'd rather defer this until all
domains are handled by the driver.

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68korg

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index 50ed66d42a24..74af0f730b89 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -81,7 +81,7 @@  sdhi0: mmc@85000000 {
 				 <&cpg CPG_MOD R9A09G011_SDI0_ACLK>;
 			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A09G011_SDI0_IXRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -97,7 +97,7 @@  sdhi1: mmc@85010000  {
 				 <&cpg CPG_MOD R9A09G011_SDI1_ACLK>;
 			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A09G011_SDI1_IXRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -113,7 +113,7 @@  emmc: mmc@85020000  {
 				 <&cpg CPG_MOD R9A09G011_EMM_ACLK>;
 			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A09G011_EMM_IXRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -129,7 +129,7 @@  usb3drd: usb3drd@85070400 {
 				 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
 			clock-names = "axi", "reg";
 			resets = <&cpg R9A09G011_USB_DRD_RESET>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			ranges;
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -144,7 +144,7 @@  usb3host: usb@85060000 {
 					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
 				clock-names = "axi", "reg";
 				resets = <&cpg R9A09G011_USB_ARESETN_H>;
-				power-domains = <&cpg>;
+				power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 				status = "disabled";
 			};
 
@@ -157,7 +157,7 @@  usb3peri: usb3peri@85070000 {
 					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
 				clock-names = "axi", "reg";
 				resets = <&cpg R9A09G011_USB_ARESETN_P>;
-				power-domains = <&cpg>;
+				power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 				status = "disabled";
 			};
 		};
@@ -207,7 +207,7 @@  avb: ethernet@a3300000 {
 				 <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>;
 			clock-names = "axi", "chi", "gptp";
 			resets = <&cpg R9A09G011_ETH0_RST_HW_N>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -220,7 +220,7 @@  cpg: clock-controller@a3500000 {
 			clock-names = "extal";
 			#clock-cells = <2>;
 			#reset-cells = <1>;
-			#power-domain-cells = <0>;
+			#power-domain-cells = <1>;
 		};
 
 		pwc: pwc@a3700000 {
@@ -244,7 +244,7 @@  csi0: spi@a4020000 {
 				 <&cpg CPG_MOD R9A09G011_CPERI_GRPG_PCLK>;
 			clock-names = "csiclk", "pclk";
 			resets = <&cpg R9A09G011_CSI_GPG_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -258,7 +258,7 @@  csi4: spi@a4020200 {
 				 <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>;
 			clock-names = "csiclk", "pclk";
 			resets = <&cpg R9A09G011_CSI_GPH_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -274,7 +274,7 @@  i2c0: i2c@a4030000 {
 			interrupt-names = "tia", "tis";
 			clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
 			resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -288,7 +288,7 @@  i2c2: i2c@a4030100 {
 			interrupt-names = "tia", "tis";
 			clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK1>;
 			resets = <&cpg R9A09G011_IIC_GPB_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -311,7 +311,7 @@  wdt0: watchdog@a4050000 {
 			clock-names = "pclk", "oscclk";
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&cpg R9A09G011_WDT0_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -361,7 +361,7 @@  pinctrl: pinctrl@b6250000 {
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A09G011_PD_ALWAYS_ON>;
 			resets = <&cpg R9A09G011_PFC_PRESETN>;
 		};
 	};