[v3,2/3] PCI/ASPM: Add notes about enabling PCI-PM L1SS to pci_enable_link_state(_locked)

Message ID 20240207111402.576152-3-jhp@endlessos.org
State New
Headers
Series [v3,1/3] PCI: vmd: Enable PCI PM's L1 substates of remapped PCIe Root Port and NVMe |

Commit Message

Jian-Hong Pan Feb. 7, 2024, 11:14 a.m. UTC
  According to PCI Express Base Specification Revision 6.0, Section 5.5.4:
"If setting either or both of the enable bits for PCI-PM L1 PM Substates,
both ports must be configured as described in this section while in D0."

Add notes into pci_enable_link_state(_locked) for kernel-doc. Hope these
notify callers ensuring the devices in D0, if PCI-PM L1 PM Substates are
going to be enabled.

Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
---
v3:
- Fix as readable comments

 drivers/pci/pcie/aspm.c | 6 ++++++
 1 file changed, 6 insertions(+)
  

Patch

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 7f1d674ff171..a39d2ee744cb 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1416,6 +1416,9 @@  static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked)
  * touch the LNKCTL register. Also note that this does not enable states
  * disabled by pci_disable_link_state(). Return 0 or a negative errno.
  *
+ * Note: Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per
+ * PCIe r6.0, sec 5.5.4.
+ *
  * @pdev: PCI device
  * @state: Mask of ASPM link states to enable
  */
@@ -1432,6 +1435,9 @@  EXPORT_SYMBOL(pci_enable_link_state);
  * can't touch the LNKCTL register. Also note that this does not enable states
  * disabled by pci_disable_link_state(). Return 0 or a negative errno.
  *
+ * Note: Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per
+ * PCIe r6.0, sec 5.5.4.
+ *
  * @pdev: PCI device
  * @state: Mask of ASPM link states to enable
  *