diff mbox series

[v3,1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings

Message ID 20240206065818.2016910-1-mike.looijmans@topic.nl
State New
Headers
Series [v3,1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings |

Commit Message

Mike Looijmans Feb. 6, 2024, 6:58 a.m. UTC 
  Bindings for the TI ADS1298 medical ADC. This device is
typically used for ECG and similar measurements. Supports data
acquisition at configurable scale and sampling frequency.

The device has so many options for connecting stuff, at this
point the bindings aren't nearly complete but partial bindings
are better than no bindings at all.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>

---

(no changes since v2)

Changes in v2:
Remove "clk" name
Add datasheet and "incomplete" note

 .../bindings/iio/adc/ti,ads1298.yaml          | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml

Comments

Conor Dooley Feb. 6, 2024, 3:28 p.m. UTC | #1 
On Tue, Feb 06, 2024 at 07:58:17AM +0100, Mike Looijmans wrote:
> Bindings for the TI ADS1298 medical ADC. This device is
> typically used for ECG and similar measurements. Supports data
> acquisition at configurable scale and sampling frequency.
> 
> The device has so many options for connecting stuff, at this
> point the bindings aren't nearly complete but partial bindings
> are better than no bindings at all.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> 
> ---
> 
> (no changes since v2)

I think you forgot a tag:
https://lore.kernel.org/all/20240202-lilly-dart-0968dbcc6b17@spud/
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 000000000000..bf5a43a81d59
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+description: |
+  Datasheet at: https://www.ti.com/product/ADS1298
+  Bindings for this chip aren't complete.
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1298
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog power supply, voltage between AVDD and AVSS. When providing a
+      symmetric +/- 2.5V, the regulator should report 5V.
+
+  vref-supply:
+    description:
+      Optional reference voltage. If omitted, internal reference is used,
+      which is 2.4V when analog supply is below 4.4V, 4V otherwise.
+
+  clocks:
+    description: Optional 2.048 MHz external source clock on CLK pin
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt on DRDY pin, triggers on falling edge
+    maxItems: 1
+
+  label: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1 {
+          reg = <1>;
+          compatible = "ti,ads1298";
+          label = "ads1298-1-ecg";
+          avdd-supply = <&reg_iso_5v_a>;
+          clocks = <&clk_ads1298>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+          spi-max-frequency = <20000000>;
+          spi-cpha;
+        };
+    };
+...