[v5,1/3] dt-bindings: display: add STM32 LVDS device
Commit Message
Add "st,stm32mp25-lvds" compatible.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
Depends on: "dt-bindings: stm32: add clocks and reset binding for
stm32mp25 platform" by Gabriel Fernandez
Changes in v5:
- Fixed path in MAINTAINERS
Changes in v4:
- Align filename to compatible
- Fix compatible in the example
- Remove redundant word in the subject
Changes in v3:
- Clarify commit dependency
- Fix includes in the example
- Fix YAML
- Add "clock-cells" description
- s/regroups/is composed of/
- Changed compatible to show SoC specificity
Changes in v2:
- Switch compatible and clock-cells related areas
- Remove faulty #include in the example.
- Add entry in MAINTAINERS
---
.../bindings/display/st,stm32mp25-lvds.yaml | 119 +++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 120 insertions(+)
new file mode 100644
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32mp25-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 LVDS Display Interface Transmitter
+
+maintainers:
+ - Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
+ - Yannick Fertre <yannick.fertre@foss.st.com>
+
+description: |
+ The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
+ LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
+ onto the LVDS PHY.
+
+ It is composed of three sub blocks:
+ - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
+ pixels onto the data lanes of the PHY
+ - LVDS PHY: parallelize the data and drives the LVDS data lanes
+ - LVDS wrapper: handles top-level settings
+
+ The LVDS controller driver supports the following high-level features:
+ - FDP-Link-I and OpenLDI (v0.95) protocols
+ - Single-Link or Dual-Link operation
+ - Single-Display or Double-Display (with the same content duplicated on both)
+ - Flexible Bit-Mapping, including JEIDA and VESA
+ - RGB888 or RGB666 output
+ - Synchronous design, with one input pixel per clock cycle
+
+properties:
+ compatible:
+ const: st,stm32mp25-lvds
+
+ "#clock-cells":
+ const: 0
+ description:
+ Provides the internal LVDS PHY clock to the framework.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB peripheral clock
+ - description: Reference clock for the internal PLL
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: ref
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ LVDS input port node, connected to the LTDC RGB output port.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ LVDS output port node, connected to a panel or bridge input port.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+ #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+ lvds: lvds@48060000 {
+ compatible = "st,stm32mp25-lvds";
+ reg = <0x48060000 0x2000>;
+ #clock-cells = <0>;
+ clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+ clock-names = "pclk", "ref";
+ resets = <&rcc LVDS_R>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_in: endpoint {
+ remote-endpoint = <<dc_ep1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds_out0: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+ };
+
+...
@@ -7231,6 +7231,7 @@ L: dri-devel@lists.freedesktop.org
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+F: Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
F: drivers/gpu/drm/stm
DRM DRIVERS FOR TI KEYSTONE