From patchwork Fri Feb 2 17:55:36 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hari Nagalla X-Patchwork-Id: 195969 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:7301:9bc1:b0:106:209c:c626 with SMTP id op1csp597054dyc; Fri, 2 Feb 2024 09:58:32 -0800 (PST) X-Google-Smtp-Source: AGHT+IGyJ7Do9lRKUF+/dYw0zhsJqyEUDBHpDoNuqCllLIPhYTr0KaaWq5z+9RgX0D3I9KBQzKDq X-Received: by 2002:a17:906:3888:b0:a34:abc2:3627 with SMTP id q8-20020a170906388800b00a34abc23627mr2069677ejd.24.1706896712241; Fri, 02 Feb 2024 09:58:32 -0800 (PST) ARC-Seal: i=2; a=rsa-sha256; t=1706896712; cv=pass; d=google.com; s=arc-20160816; b=rcBPRPV36yR2BS3z0OtGA2hXOdukDbmZrvoiVdnZRJmgzzcfJ0/smDcyRvsndfO9By wc2dii2Lqq223bbZvgSzFi7pPrppOPxpuXfSVgkcytxNJwYEd5/dYSXuGk60hNV866RT 6c6e4p8EHE0ibna6bPZRkN/R9k7YE3dHIYQsE+U73CwZxdhcOUzYDN7S+gXv0gD9Wo43 32ut4ZXC+yVAj+Kh4w/+5N4GSgy+T33aJA57BvkiW1Yavj1h/7EEimRjZ6UBEuZ4a9fs HwilbzOjAC3s+w6koW84/BuWhQQjDd7r/bHE0QEX9jSyF5bjO4D+Ry6pj8wsotk1DfPu XDoQ== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=mime-version:list-unsubscribe:list-subscribe:list-id:precedence :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=futG7NDdeQeGH8ebS9HHx/c6wNULnIii+UvDgu9ktTw=; fh=bjrIp0gOg+9gwuDfnUkxi/MXBbg6p2Fw4UkdnNtsMY4=; b=p/Ni5Qy7JFp2bWztsl9IgtLFP1NDmLTH21W59s7imgNGLM/L/dNy3K5j0CWAq+BKrn vxtYip2dSnOZYZjHXxEMTI7H9C8EnId9icXiOvDGklXG7uyEU1sDvWuwv7oD4nFZXdOi jFFyRlORwkUxLOz0/AxBoj+cEO9lrIuhPfmTMKrYfWiccjixqpzv5DKLn91p4dEJYt4W k/EvCuu+ci+NOU8FkSo0HH1kZssCbrxyiPoLnIC/CEgfJxhDspmYfzj1F1W3X2fvgV9x 3IINguz4Lo+LXacBIZciv0KO0gtxqcOtWTjeXN/pbytwHijW54kvFIv5PnrhFMxFm9Lo qVpA==; dara=google.com ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b="Gb/uwzvX"; arc=pass (i=1 spf=pass spfdomain=ti.com dkim=pass dkdomain=ti.com dmarc=pass fromdomain=ti.com); spf=pass (google.com: domain of linux-kernel+bounces-50276-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) smtp.mailfrom="linux-kernel+bounces-50276-ouuuleilei=gmail.com@vger.kernel.org"; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com X-Forwarded-Encrypted: i=1; AJvYcCXr62IBh1ApGQrGPwF8yth+UbfdmVA7QICOiwvZdUPYcIMbbvp7FxKGTijGgY8nE3fzXTIS0lFIgIyvhEgaMYj8COGn5w== Received: from am.mirrors.kernel.org (am.mirrors.kernel.org. [147.75.80.249]) by mx.google.com with ESMTPS id mj19-20020a170906af9300b00a372609d805si377037ejb.329.2024.02.02.09.58.32 for (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Feb 2024 09:58:32 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel+bounces-50276-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b="Gb/uwzvX"; arc=pass (i=1 spf=pass spfdomain=ti.com dkim=pass dkdomain=ti.com dmarc=pass fromdomain=ti.com); spf=pass (google.com: domain of linux-kernel+bounces-50276-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) smtp.mailfrom="linux-kernel+bounces-50276-ouuuleilei=gmail.com@vger.kernel.org"; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: from smtp.subspace.kernel.org (wormhole.subspace.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by am.mirrors.kernel.org (Postfix) with ESMTPS id 2BBD11F21603 for ; Fri, 2 Feb 2024 17:58:31 +0000 (UTC) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 3184814D442; Fri, 2 Feb 2024 17:56:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="Gb/uwzvX" Received: from fllv0015.ext.ti.com (fllv0015.ext.ti.com [198.47.19.141]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4D4A15FDD3; Fri, 2 Feb 2024 17:56:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.47.19.141 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706896583; cv=none; b=KvbPD9gAsSsCN5EO+YDEOuHcutxX7DCb9cG7dtHphsJ7HY+iVh9v31jhEO6d+6jNZ6JDlTuRgrbwT/EO4I1PB3MUXhiEy3R2ajax2LiLc+KNL/hX3IW8oE6qk7SvG/ITBVUmDyo7x8gSzLGyScuTQiYqzdovBoEHRef+jIdBtrQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706896583; c=relaxed/simple; bh=cIplt6C9ksUhT+KQP2cK4lnV801nPdIVRDo40p8yzJM=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=E/SJ8KO34bVB/vLkbQIr2Nzlyfv8wJzyg6s8AOv7lQ4o+kjDAsiwsmzSzlMaX/AjiOeULHE81fOnvoAK4Ooxx/zoR3AnI+U3DMvYmQYcPloIk1PCOwM3/MnChuydyFFmKBGaeYqFb73YxqHA5f+QFGGWwgYX0jBsN4JILUGNOHc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com; spf=pass smtp.mailfrom=ti.com; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b=Gb/uwzvX; arc=none smtp.client-ip=198.47.19.141 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ti.com Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 412HtkAD030671; Fri, 2 Feb 2024 11:55:46 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1706896546; bh=futG7NDdeQeGH8ebS9HHx/c6wNULnIii+UvDgu9ktTw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=Gb/uwzvXRpTMJ5WMCNBCc/iBIs7v+IlyBtql0W03eEeTuU/6JxBaUEt1mW0+dyQpJ GhBWpNqHSBix0BiiQEQfkt7jPD7fMJBiR9H2HpjUD3VmZBiysf2C5Cnlv/gqC+6mMm eEAPu3+4jG555V366L6coKrihQZo9l4pnetPZQ0E= Received: from DLEE110.ent.ti.com (dlee110.ent.ti.com [157.170.170.21]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 412HtkuS125871 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 2 Feb 2024 11:55:46 -0600 Received: from DLEE115.ent.ti.com (157.170.170.26) by DLEE110.ent.ti.com (157.170.170.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Fri, 2 Feb 2024 11:55:46 -0600 Received: from lelvsmtp6.itg.ti.com (10.180.75.249) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Fri, 2 Feb 2024 11:55:46 -0600 Received: from localhost ([10.249.48.175]) by lelvsmtp6.itg.ti.com (8.15.2/8.15.2) with ESMTP id 412Htk4R061030; Fri, 2 Feb 2024 11:55:46 -0600 From: Hari Nagalla To: , , , , , , , , , CC: , , , Subject: [PATCH v7 3/5] remoteproc: k3: Move out functions common with M4 driver Date: Fri, 2 Feb 2024 11:55:36 -0600 Message-ID: <20240202175538.1705-4-hnagalla@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20240202175538.1705-1-hnagalla@ti.com> References: <20240202175538.1705-1-hnagalla@ti.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1789810927133945098 X-GMAIL-MSGID: 1789810927133945098 From: Martyn Welch In the next commit we will be adding the M4F driver which shares a lot of commonality with the DSP driver. Move this shared functionality out so that it can be used by both drivers. Signed-off-by: Martyn Welch Signed-off-by: Hari Nagalla --- Changes since v2: - New patch (reordered refactored from v2) Changes since v3: - Removed "ipc_only" element from k3_rproc structure - Refactored to bring 3 more common functions Changes since v4: - None Changes since v5: - Rearranged the functions order to match with the functions in ti_k3_dsp_remoteproc.c to ease review. Changes since v6: - Generated patch with -M/-B/-C options link to v6: https://lore.kernel.org/all/20230913111644.29889-4-hnagalla@ti.com/ drivers/remoteproc/Makefile | 2 +- drivers/remoteproc/ti_k3_common.c | 583 ++++++++++ drivers/remoteproc/ti_k3_dsp_remoteproc.c | 1277 ++++++--------------- 3 files changed, 952 insertions(+), 910 deletions(-) create mode 100644 drivers/remoteproc/ti_k3_common.c rewrite drivers/remoteproc/ti_k3_dsp_remoteproc.c (67%) diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 91314a9b43ce..55c552e27a45 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -36,6 +36,6 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o -obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o +obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o ti_k3_common.o obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o diff --git a/drivers/remoteproc/ti_k3_common.c b/drivers/remoteproc/ti_k3_common.c new file mode 100644 index 000000000000..62c7c5dba78a --- /dev/null +++ b/drivers/remoteproc/ti_k3_common.c @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI K3 Remote Processor(s) driver common code + * + * Refactored from ti_k3_dsp_remoteproc.c. + * + * ti_k3_dsp_remoteproc.c: + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Suman Anna + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap_remoteproc.h" +#include "remoteproc_internal.h" +#include "ti_sci_proc.h" +#include "ti_k3_common.h" + +/** + * k3_rproc_mbox_callback() - inbound mailbox message handler + * @client: mailbox client pointer used for requesting the mailbox channel + * @data: mailbox payload + * + * This handler is invoked by the K3 mailbox driver whenever a mailbox + * message is received. Usually, the mailbox payload simply contains + * the index of the virtqueue that is kicked by the remote processor, + * and we let remoteproc core handle it. + * + * In addition to virtqueue indices, we also have some out-of-band values + * that indicate different events. Those values are deliberately very + * large so they don't coincide with virtqueue indices. + */ +static void k3_rproc_mbox_callback(struct mbox_client *client, void *data) +{ + struct k3_rproc *kproc = container_of(client, struct k3_rproc, + client); + struct device *dev = kproc->rproc->dev.parent; + const char *name = kproc->rproc->name; + u32 msg = omap_mbox_message(data); + + dev_dbg(dev, "mbox msg: 0x%x\n", msg); + + switch (msg) { + case RP_MBOX_CRASH: + /* + * remoteproc detected an exception, but error recovery is not + * supported. So, just log this for now + */ + dev_err(dev, "K3 rproc %s crashed\n", name); + break; + case RP_MBOX_ECHO_REPLY: + dev_info(dev, "received echo reply from %s\n", name); + break; + default: + /* silently handle all other valid messages */ + if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG) + return; + if (msg > kproc->rproc->max_notifyid) { + dev_dbg(dev, "dropping unknown message 0x%x", msg); + return; + } + /* msg contains the index of the triggered vring */ + if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE) + dev_dbg(dev, "no message was found in vqid %d\n", msg); + } +} + +/* + * Kick the remote processor to notify about pending unprocessed messages. + * The vqid usage is not used and is inconsequential, as the kick is performed + * through a simulated GPIO (a bit in an IPC interrupt-triggering register), + * the remote processor is expected to process both its Tx and Rx virtqueues. + */ +void k3_rproc_kick(struct rproc *rproc, int vqid) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = rproc->dev.parent; + mbox_msg_t msg = (mbox_msg_t)vqid; + int ret; + + /* send the index of the triggered virtqueue in the mailbox payload */ + ret = mbox_send_message(kproc->mbox, (void *)msg); + if (ret < 0) + dev_err(dev, "failed to send mailbox message, status = %d\n", + ret); +} +EXPORT_SYMBOL_GPL(k3_rproc_kick); + +/* Put the remote processor into reset */ +int k3_rproc_reset(struct k3_rproc *kproc) +{ + struct device *dev = kproc->dev; + int ret; + + ret = reset_control_assert(kproc->reset); + if (ret) { + dev_err(dev, "local-reset assert failed, ret = %d\n", ret); + return ret; + } + + if (kproc->data->uses_lreset) + return ret; + + ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) { + dev_err(dev, "module-reset assert failed, ret = %d\n", ret); + if (reset_control_deassert(kproc->reset)) + dev_warn(dev, "local-reset deassert back failed\n"); + } + + return ret; +} +EXPORT_SYMBOL_GPL(k3_rproc_reset); + +/* Release the remote processor from reset */ +int k3_rproc_release(struct k3_rproc *kproc) +{ + struct device *dev = kproc->dev; + int ret; + + if (kproc->data->uses_lreset) + goto lreset; + + ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) { + dev_err(dev, "module-reset deassert failed, ret = %d\n", ret); + return ret; + } + +lreset: + ret = reset_control_deassert(kproc->reset); + if (ret) { + dev_err(dev, "local-reset deassert failed, ret = %d\n", ret); + if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, + kproc->ti_sci_id)) + dev_warn(dev, "module-reset assert back failed\n"); + } + + return ret; +} +EXPORT_SYMBOL_GPL(k3_rproc_release); + +int k3_rproc_request_mbox(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + struct mbox_client *client = &kproc->client; + struct device *dev = kproc->dev; + int ret; + + client->dev = dev; + client->tx_done = NULL; + client->rx_callback = k3_rproc_mbox_callback; + client->tx_block = false; + client->knows_txdone = false; + + kproc->mbox = mbox_request_channel(client, 0); + if (IS_ERR(kproc->mbox)) { + ret = -EBUSY; + dev_err(dev, "mbox_request_channel failed: %ld\n", + PTR_ERR(kproc->mbox)); + return ret; + } + + /* + * Ping the remote processor, this is only for sanity-sake for now; + * there is no functional effect whatsoever. + * + * Note that the reply will _not_ arrive immediately: this message + * will wait in the mailbox fifo until the remote processor is booted. + */ + ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); + if (ret < 0) { + dev_err(dev, "mbox_send_message failed: %d\n", ret); + mbox_free_channel(kproc->mbox); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(k3_rproc_request_mbox); + +/* + * The DSP and MCU cores have a local reset that affects only the CPU, and a + * generic module reset that powers on the device and allows the internal + * memories to be accessed while the local reset is asserted. This function is + * used to release the global reset on remote cores to allow loading into the + * internal RAMs. The .prepare() ops is invoked by remoteproc core before any + * firmware loading, and is followed by the .start() ops after loading to + * actually let the remote cores to run. This callback is invoked only in + * remoteproc mode. + */ +int k3_rproc_prepare(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) + dev_err(dev, "module-reset deassert failed, cannot enable internal RAM loading, ret = %d\n", + ret); + + return ret; +} +EXPORT_SYMBOL_GPL(k3_rproc_prepare); + +/* + * This function implements the .unprepare() ops and performs the complimentary + * operations to that of the .prepare() ops. The function is used to assert the + * global reset on applicable DSP, MCU cores. This completes the second portion of + * powering down the remote core. The cores themselves are only halted in the + * .stop() callback through the local reset, and the .unprepare() ops is invoked + * by the remoteproc core after the remoteproc is stopped to balance the global + * reset. This callback is invoked only in remoteproc mode. + */ +int k3_rproc_unprepare(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) + dev_err(dev, "module-reset assert failed, ret = %d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(k3_rproc_unprepare); + +/* + * This function implements the .get_loaded_rsc_table() callback and is used + * to provide the resource table for a booted remote processor in IPC-only + * mode. The remote processor firmwares follow a design-by-contract approach + * and are expected to have the resource table at the base of the DDR region + * reserved for firmware usage. This provides flexibility for the remote + * processor to be booted by different bootloaders that may or may not have the + * ability to publish the resource table address and size through a DT + * property. + */ +struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc, + size_t *rsc_table_sz) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + if (!kproc->rmem[0].cpu_addr) { + dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found"); + return ERR_PTR(-ENOMEM); + } + + /* + * NOTE: The resource table size is currently hard-coded to a maximum + * of 256 bytes. The most common resource table usage for K3 firmwares + * is to only have the vdev resource entry and an optional trace entry. + * The exact size could be computed based on resource table address, but + * the hard-coded value suffices to support the IPC-only mode. + */ + *rsc_table_sz = 256; + return (struct resource_table *)kproc->rmem[0].cpu_addr; +} +EXPORT_SYMBOL_GPL(k3_get_loaded_rsc_table); + +/* + * Custom function to translate a remote processor device address (internal + * RAMs only) to a kernel virtual address. The remote processors can access + * their RAMs at either an internal address visible only from a remote + * processor, or at the SoC-level bus address. Both these addresses need to be + * looked through for translation. The translated addresses can be used either + * by the remoteproc core for loading (when using kernel remoteproc loader), or + * by any rpmsg bus drivers. + */ +void *k3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) +{ + struct k3_rproc *kproc = rproc->priv; + void __iomem *va = NULL; + phys_addr_t bus_addr; + u32 dev_addr, offset; + size_t size; + int i; + + if (len == 0) + return NULL; + + for (i = 0; i < kproc->num_mems; i++) { + bus_addr = kproc->mem[i].bus_addr; + dev_addr = kproc->mem[i].dev_addr; + size = kproc->mem[i].size; + + if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) { + /* handle remote-view addresses */ + if (da >= dev_addr && + ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = kproc->mem[i].cpu_addr + offset; + return (__force void *)va; + } + } else { + /* handle SoC-view addresses */ + if (da >= bus_addr && + (da + len) <= (bus_addr + size)) { + offset = da - bus_addr; + va = kproc->mem[i].cpu_addr + offset; + return (__force void *)va; + } + } + } + + /* handle any SRAM regions using SoC-view addresses */ + for (i = 0; i < kproc->num_sram; i++) { + dev_addr = kproc->sram[i].dev_addr; + size = kproc->sram[i].size; + + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = kproc->sram[i].cpu_addr + offset; + return (__force void *)va; + } + } + + /* handle static DDR reserved memory regions */ + for (i = 0; i < kproc->num_rmems; i++) { + dev_addr = kproc->rmem[i].dev_addr; + size = kproc->rmem[i].size; + + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = kproc->rmem[i].cpu_addr + offset; + return (__force void *)va; + } + } + + return NULL; +} +EXPORT_SYMBOL_GPL(k3_rproc_da_to_va); + +int k3_rproc_of_get_memories(struct platform_device *pdev, + struct k3_rproc *kproc) +{ + const struct k3_rproc_dev_data *data = kproc->data; + struct device *dev = &pdev->dev; + struct resource *res; + int num_mems = 0; + int i; + + num_mems = kproc->data->num_mems; + kproc->mem = devm_kcalloc(kproc->dev, num_mems, + sizeof(*kproc->mem), GFP_KERNEL); + if (!kproc->mem) + return -ENOMEM; + + for (i = 0; i < num_mems; i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + data->mems[i].name); + if (!res) { + dev_err(dev, "found no memory resource for %s\n", + data->mems[i].name); + return -EINVAL; + } + if (!devm_request_mem_region(dev, res->start, + resource_size(res), + dev_name(dev))) { + dev_err(dev, "could not request %s region for resource\n", + data->mems[i].name); + return -EBUSY; + } + + kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start, + resource_size(res)); + if (!kproc->mem[i].cpu_addr) { + dev_err(dev, "failed to map %s memory\n", + data->mems[i].name); + return -ENOMEM; + } + kproc->mem[i].bus_addr = res->start; + kproc->mem[i].dev_addr = data->mems[i].dev_addr; + kproc->mem[i].size = resource_size(res); + + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n", + data->mems[i].name, &kproc->mem[i].bus_addr, + kproc->mem[i].size, kproc->mem[i].cpu_addr, + kproc->mem[i].dev_addr); + } + kproc->num_mems = num_mems; + + return 0; +} +EXPORT_SYMBOL_GPL(k3_rproc_of_get_memories); + +int k3_rproc_of_get_sram_memories(struct platform_device *pdev, + struct k3_rproc *kproc) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct device_node *sram_np; + struct resource res; + int num_sram; + int i, ret; + + num_sram = of_property_count_elems_of_size(np, "sram", sizeof(phandle)); + if (num_sram <= 0) { + dev_dbg(dev, "device does not use reserved on-chip memories, num_sram = %d\n", + num_sram); + return 0; + } + + kproc->sram = devm_kcalloc(dev, num_sram, sizeof(*kproc->sram), GFP_KERNEL); + if (!kproc->sram) + return -ENOMEM; + + for (i = 0; i < num_sram; i++) { + sram_np = of_parse_phandle(np, "sram", i); + if (!sram_np) + return -EINVAL; + + if (!of_device_is_available(sram_np)) { + of_node_put(sram_np); + return -EINVAL; + } + + ret = of_address_to_resource(sram_np, 0, &res); + of_node_put(sram_np); + if (ret) + return -EINVAL; + + kproc->sram[i].bus_addr = res.start; + kproc->sram[i].dev_addr = res.start; + kproc->sram[i].size = resource_size(&res); + kproc->sram[i].cpu_addr = devm_ioremap_wc(dev, res.start, + resource_size(&res)); + if (!kproc->sram[i].cpu_addr) { + dev_err(dev, "failed to parse and map sram%d memory at %pad\n", + i, &res.start); + return -ENOMEM; + } + + dev_dbg(dev, "memory sram%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", + i, &kproc->sram[i].bus_addr, + kproc->sram[i].size, kproc->sram[i].cpu_addr, + kproc->sram[i].dev_addr); + } + kproc->num_sram = num_sram; + + return 0; +} +EXPORT_SYMBOL_GPL(k3_rproc_of_get_sram_memories); +int k3_reserved_mem_init(struct k3_rproc *kproc) +{ + struct device *dev = kproc->dev; + struct device_node *np = dev->of_node; + struct device_node *rmem_np; + struct reserved_mem *rmem; + int num_rmems; + int ret, i; + + num_rmems = of_property_count_elems_of_size(np, "memory-region", + sizeof(phandle)); + if (num_rmems <= 0) { + dev_err(dev, "device does not reserved memory regions, ret = %d\n", + num_rmems); + return -EINVAL; + } + if (num_rmems < 2) { + dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n", + num_rmems); + return -EINVAL; + } + + /* use reserved memory region 0 for vring DMA allocations */ + ret = of_reserved_mem_device_init_by_idx(dev, np, 0); + if (ret) { + dev_err(dev, "device cannot initialize DMA pool, ret = %d\n", + ret); + return ret; + } + + num_rmems--; + kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL); + if (!kproc->rmem) { + ret = -ENOMEM; + goto release_rmem; + } + + /* use remaining reserved memory regions for static carveouts */ + for (i = 0; i < num_rmems; i++) { + rmem_np = of_parse_phandle(np, "memory-region", i + 1); + if (!rmem_np) { + ret = -EINVAL; + goto unmap_rmem; + } + + rmem = of_reserved_mem_lookup(rmem_np); + if (!rmem) { + of_node_put(rmem_np); + ret = -EINVAL; + goto unmap_rmem; + } + of_node_put(rmem_np); + + kproc->rmem[i].bus_addr = rmem->base; + /* 64-bit address regions currently not supported */ + kproc->rmem[i].dev_addr = (u32)rmem->base; + kproc->rmem[i].size = rmem->size; + kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size); + if (!kproc->rmem[i].cpu_addr) { + dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n", + i + 1, &rmem->base, &rmem->size); + ret = -ENOMEM; + goto unmap_rmem; + } + + dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", + i + 1, &kproc->rmem[i].bus_addr, + kproc->rmem[i].size, kproc->rmem[i].cpu_addr, + kproc->rmem[i].dev_addr); + } + kproc->num_rmems = num_rmems; + + return 0; + +unmap_rmem: + for (i--; i >= 0; i--) + iounmap(kproc->rmem[i].cpu_addr); + kfree(kproc->rmem); +release_rmem: + of_reserved_mem_device_release(kproc->dev); + return ret; +} +EXPORT_SYMBOL_GPL(k3_reserved_mem_init); + +void k3_reserved_mem_exit(struct k3_rproc *kproc) +{ + int i; + + for (i = 0; i < kproc->num_rmems; i++) + iounmap(kproc->rmem[i].cpu_addr); + kfree(kproc->rmem); + + of_reserved_mem_device_release(kproc->dev); +} +EXPORT_SYMBOL_GPL(k3_reserved_mem_exit); + +struct ti_sci_proc *k3_rproc_of_get_tsp(struct device *dev, + const struct ti_sci_handle *sci) +{ + struct ti_sci_proc *tsp; + u32 temp[2]; + int ret; + + ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids", + temp, 2); + if (ret < 0) + return ERR_PTR(ret); + + tsp = kzalloc(sizeof(*tsp), GFP_KERNEL); + if (!tsp) + return ERR_PTR(-ENOMEM); + + tsp->dev = dev; + tsp->sci = sci; + tsp->ops = &sci->ops.proc_ops; + tsp->proc_id = temp[0]; + tsp->host_id = temp[1]; + + return tsp; +} +EXPORT_SYMBOL_GPL(k3_rproc_of_get_tsp); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI K3 common Remoteproc support"); diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c dissimilarity index 67% index ab882e3b7130..ebe23fc5ca44 100644 --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c @@ -1,909 +1,368 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI K3 DSP Remote Processor(s) driver - * - * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ - * Suman Anna - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "omap_remoteproc.h" -#include "remoteproc_internal.h" -#include "ti_sci_proc.h" - -#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) - -/** - * struct k3_dsp_mem - internal memory structure - * @cpu_addr: MPU virtual address of the memory region - * @bus_addr: Bus address used to access the memory region - * @dev_addr: Device address of the memory region from DSP view - * @size: Size of the memory region - */ -struct k3_dsp_mem { - void __iomem *cpu_addr; - phys_addr_t bus_addr; - u32 dev_addr; - size_t size; -}; - -/** - * struct k3_dsp_mem_data - memory definitions for a DSP - * @name: name for this memory entry - * @dev_addr: device address for the memory entry - */ -struct k3_dsp_mem_data { - const char *name; - const u32 dev_addr; -}; - -/** - * struct k3_dsp_dev_data - device data structure for a DSP - * @mems: pointer to memory definitions for a DSP - * @num_mems: number of memory regions in @mems - * @boot_align_addr: boot vector address alignment granularity - * @uses_lreset: flag to denote the need for local reset management - */ -struct k3_dsp_dev_data { - const struct k3_dsp_mem_data *mems; - u32 num_mems; - u32 boot_align_addr; - bool uses_lreset; -}; - -/** - * struct k3_dsp_rproc - k3 DSP remote processor driver structure - * @dev: cached device pointer - * @rproc: remoteproc device handle - * @mem: internal memory regions data - * @num_mems: number of internal memory regions - * @rmem: reserved memory regions data - * @num_rmems: number of reserved memory regions - * @reset: reset control handle - * @data: pointer to DSP-specific device data - * @tsp: TI-SCI processor control handle - * @ti_sci: TI-SCI handle - * @ti_sci_id: TI-SCI device identifier - * @mbox: mailbox channel handle - * @client: mailbox client to request the mailbox channel - */ -struct k3_dsp_rproc { - struct device *dev; - struct rproc *rproc; - struct k3_dsp_mem *mem; - int num_mems; - struct k3_dsp_mem *rmem; - int num_rmems; - struct reset_control *reset; - const struct k3_dsp_dev_data *data; - struct ti_sci_proc *tsp; - const struct ti_sci_handle *ti_sci; - u32 ti_sci_id; - struct mbox_chan *mbox; - struct mbox_client client; -}; - -/** - * k3_dsp_rproc_mbox_callback() - inbound mailbox message handler - * @client: mailbox client pointer used for requesting the mailbox channel - * @data: mailbox payload - * - * This handler is invoked by the OMAP mailbox driver whenever a mailbox - * message is received. Usually, the mailbox payload simply contains - * the index of the virtqueue that is kicked by the remote processor, - * and we let remoteproc core handle it. - * - * In addition to virtqueue indices, we also have some out-of-band values - * that indicate different events. Those values are deliberately very - * large so they don't coincide with virtqueue indices. - */ -static void k3_dsp_rproc_mbox_callback(struct mbox_client *client, void *data) -{ - struct k3_dsp_rproc *kproc = container_of(client, struct k3_dsp_rproc, - client); - struct device *dev = kproc->rproc->dev.parent; - const char *name = kproc->rproc->name; - u32 msg = omap_mbox_message(data); - - dev_dbg(dev, "mbox msg: 0x%x\n", msg); - - switch (msg) { - case RP_MBOX_CRASH: - /* - * remoteproc detected an exception, but error recovery is not - * supported. So, just log this for now - */ - dev_err(dev, "K3 DSP rproc %s crashed\n", name); - break; - case RP_MBOX_ECHO_REPLY: - dev_info(dev, "received echo reply from %s\n", name); - break; - default: - /* silently handle all other valid messages */ - if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG) - return; - if (msg > kproc->rproc->max_notifyid) { - dev_dbg(dev, "dropping unknown message 0x%x", msg); - return; - } - /* msg contains the index of the triggered vring */ - if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE) - dev_dbg(dev, "no message was found in vqid %d\n", msg); - } -} - -/* - * Kick the remote processor to notify about pending unprocessed messages. - * The vqid usage is not used and is inconsequential, as the kick is performed - * through a simulated GPIO (a bit in an IPC interrupt-triggering register), - * the remote processor is expected to process both its Tx and Rx virtqueues. - */ -static void k3_dsp_rproc_kick(struct rproc *rproc, int vqid) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = rproc->dev.parent; - mbox_msg_t msg = (mbox_msg_t)vqid; - int ret; - - /* send the index of the triggered virtqueue in the mailbox payload */ - ret = mbox_send_message(kproc->mbox, (void *)msg); - if (ret < 0) - dev_err(dev, "failed to send mailbox message (%pe)\n", - ERR_PTR(ret)); -} - -/* Put the DSP processor into reset */ -static int k3_dsp_rproc_reset(struct k3_dsp_rproc *kproc) -{ - struct device *dev = kproc->dev; - int ret; - - ret = reset_control_assert(kproc->reset); - if (ret) { - dev_err(dev, "local-reset assert failed (%pe)\n", ERR_PTR(ret)); - return ret; - } - - if (kproc->data->uses_lreset) - return ret; - - ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, - kproc->ti_sci_id); - if (ret) { - dev_err(dev, "module-reset assert failed (%pe)\n", ERR_PTR(ret)); - if (reset_control_deassert(kproc->reset)) - dev_warn(dev, "local-reset deassert back failed\n"); - } - - return ret; -} - -/* Release the DSP processor from reset */ -static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) -{ - struct device *dev = kproc->dev; - int ret; - - if (kproc->data->uses_lreset) - goto lreset; - - ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, - kproc->ti_sci_id); - if (ret) { - dev_err(dev, "module-reset deassert failed (%pe)\n", ERR_PTR(ret)); - return ret; - } - -lreset: - ret = reset_control_deassert(kproc->reset); - if (ret) { - dev_err(dev, "local-reset deassert failed, (%pe)\n", ERR_PTR(ret)); - if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, - kproc->ti_sci_id)) - dev_warn(dev, "module-reset assert back failed\n"); - } - - return ret; -} - -static int k3_dsp_rproc_request_mbox(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct mbox_client *client = &kproc->client; - struct device *dev = kproc->dev; - int ret; - - client->dev = dev; - client->tx_done = NULL; - client->rx_callback = k3_dsp_rproc_mbox_callback; - client->tx_block = false; - client->knows_txdone = false; - - kproc->mbox = mbox_request_channel(client, 0); - if (IS_ERR(kproc->mbox)) { - ret = -EBUSY; - dev_err(dev, "mbox_request_channel failed: %ld\n", - PTR_ERR(kproc->mbox)); - return ret; - } - - /* - * Ping the remote processor, this is only for sanity-sake for now; - * there is no functional effect whatsoever. - * - * Note that the reply will _not_ arrive immediately: this message - * will wait in the mailbox fifo until the remote processor is booted. - */ - ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); - if (ret < 0) { - dev_err(dev, "mbox_send_message failed (%pe)\n", ERR_PTR(ret)); - mbox_free_channel(kproc->mbox); - return ret; - } - - return 0; -} -/* - * The C66x DSP cores have a local reset that affects only the CPU, and a - * generic module reset that powers on the device and allows the DSP internal - * memories to be accessed while the local reset is asserted. This function is - * used to release the global reset on C66x DSPs to allow loading into the DSP - * internal RAMs. The .prepare() ops is invoked by remoteproc core before any - * firmware loading, and is followed by the .start() ops after loading to - * actually let the C66x DSP cores run. This callback is invoked only in - * remoteproc mode. - */ -static int k3_dsp_rproc_prepare(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - int ret; - - ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, - kproc->ti_sci_id); - if (ret) - dev_err(dev, "module-reset deassert failed, cannot enable internal RAM loading (%pe)\n", - ERR_PTR(ret)); - - return ret; -} - -/* - * This function implements the .unprepare() ops and performs the complimentary - * operations to that of the .prepare() ops. The function is used to assert the - * global reset on applicable C66x cores. This completes the second portion of - * powering down the C66x DSP cores. The cores themselves are only halted in the - * .stop() callback through the local reset, and the .unprepare() ops is invoked - * by the remoteproc core after the remoteproc is stopped to balance the global - * reset. This callback is invoked only in remoteproc mode. - */ -static int k3_dsp_rproc_unprepare(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - int ret; - - ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, - kproc->ti_sci_id); - if (ret) - dev_err(dev, "module-reset assert failed (%pe)\n", ERR_PTR(ret)); - - return ret; -} - -/* - * Power up the DSP remote processor. - * - * This function will be invoked only after the firmware for this rproc - * was loaded, parsed successfully, and all of its resource requirements - * were met. This callback is invoked only in remoteproc mode. - */ -static int k3_dsp_rproc_start(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - u32 boot_addr; - int ret; - - ret = k3_dsp_rproc_request_mbox(rproc); - if (ret) - return ret; - - boot_addr = rproc->bootaddr; - if (boot_addr & (kproc->data->boot_align_addr - 1)) { - dev_err(dev, "invalid boot address 0x%x, must be aligned on a 0x%x boundary\n", - boot_addr, kproc->data->boot_align_addr); - ret = -EINVAL; - goto put_mbox; - } - - dev_err(dev, "booting DSP core using boot addr = 0x%x\n", boot_addr); - ret = ti_sci_proc_set_config(kproc->tsp, boot_addr, 0, 0); - if (ret) - goto put_mbox; - - ret = k3_dsp_rproc_release(kproc); - if (ret) - goto put_mbox; - - return 0; - -put_mbox: - mbox_free_channel(kproc->mbox); - return ret; -} - -/* - * Stop the DSP remote processor. - * - * This function puts the DSP processor into reset, and finishes processing - * of any pending messages. This callback is invoked only in remoteproc mode. - */ -static int k3_dsp_rproc_stop(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - - mbox_free_channel(kproc->mbox); - - k3_dsp_rproc_reset(kproc); - - return 0; -} - -/* - * Attach to a running DSP remote processor (IPC-only mode) - * - * This rproc attach callback only needs to request the mailbox, the remote - * processor is already booted, so there is no need to issue any TI-SCI - * commands to boot the DSP core. This callback is invoked only in IPC-only - * mode. - */ -static int k3_dsp_rproc_attach(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - int ret; - - ret = k3_dsp_rproc_request_mbox(rproc); - if (ret) - return ret; - - dev_info(dev, "DSP initialized in IPC-only mode\n"); - return 0; -} - -/* - * Detach from a running DSP remote processor (IPC-only mode) - * - * This rproc detach callback performs the opposite operation to attach callback - * and only needs to release the mailbox, the DSP core is not stopped and will - * be left to continue to run its booted firmware. This callback is invoked only - * in IPC-only mode. - */ -static int k3_dsp_rproc_detach(struct rproc *rproc) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - - mbox_free_channel(kproc->mbox); - dev_info(dev, "DSP deinitialized in IPC-only mode\n"); - return 0; -} - -/* - * This function implements the .get_loaded_rsc_table() callback and is used - * to provide the resource table for a booted DSP in IPC-only mode. The K3 DSP - * firmwares follow a design-by-contract approach and are expected to have the - * resource table at the base of the DDR region reserved for firmware usage. - * This provides flexibility for the remote processor to be booted by different - * bootloaders that may or may not have the ability to publish the resource table - * address and size through a DT property. This callback is invoked only in - * IPC-only mode. - */ -static struct resource_table *k3_dsp_get_loaded_rsc_table(struct rproc *rproc, - size_t *rsc_table_sz) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - - if (!kproc->rmem[0].cpu_addr) { - dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found"); - return ERR_PTR(-ENOMEM); - } - - /* - * NOTE: The resource table size is currently hard-coded to a maximum - * of 256 bytes. The most common resource table usage for K3 firmwares - * is to only have the vdev resource entry and an optional trace entry. - * The exact size could be computed based on resource table address, but - * the hard-coded value suffices to support the IPC-only mode. - */ - *rsc_table_sz = 256; - return (struct resource_table *)kproc->rmem[0].cpu_addr; -} - -/* - * Custom function to translate a DSP device address (internal RAMs only) to a - * kernel virtual address. The DSPs can access their RAMs at either an internal - * address visible only from a DSP, or at the SoC-level bus address. Both these - * addresses need to be looked through for translation. The translated addresses - * can be used either by the remoteproc core for loading (when using kernel - * remoteproc loader), or by any rpmsg bus drivers. - */ -static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - void __iomem *va = NULL; - phys_addr_t bus_addr; - u32 dev_addr, offset; - size_t size; - int i; - - if (len == 0) - return NULL; - - for (i = 0; i < kproc->num_mems; i++) { - bus_addr = kproc->mem[i].bus_addr; - dev_addr = kproc->mem[i].dev_addr; - size = kproc->mem[i].size; - - if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) { - /* handle DSP-view addresses */ - if (da >= dev_addr && - ((da + len) <= (dev_addr + size))) { - offset = da - dev_addr; - va = kproc->mem[i].cpu_addr + offset; - return (__force void *)va; - } - } else { - /* handle SoC-view addresses */ - if (da >= bus_addr && - (da + len) <= (bus_addr + size)) { - offset = da - bus_addr; - va = kproc->mem[i].cpu_addr + offset; - return (__force void *)va; - } - } - } - - /* handle static DDR reserved memory regions */ - for (i = 0; i < kproc->num_rmems; i++) { - dev_addr = kproc->rmem[i].dev_addr; - size = kproc->rmem[i].size; - - if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { - offset = da - dev_addr; - va = kproc->rmem[i].cpu_addr + offset; - return (__force void *)va; - } - } - - return NULL; -} - -static const struct rproc_ops k3_dsp_rproc_ops = { - .start = k3_dsp_rproc_start, - .stop = k3_dsp_rproc_stop, - .kick = k3_dsp_rproc_kick, - .da_to_va = k3_dsp_rproc_da_to_va, -}; - -static int k3_dsp_rproc_of_get_memories(struct platform_device *pdev, - struct k3_dsp_rproc *kproc) -{ - const struct k3_dsp_dev_data *data = kproc->data; - struct device *dev = &pdev->dev; - struct resource *res; - int num_mems = 0; - int i; - - num_mems = kproc->data->num_mems; - kproc->mem = devm_kcalloc(kproc->dev, num_mems, - sizeof(*kproc->mem), GFP_KERNEL); - if (!kproc->mem) - return -ENOMEM; - - for (i = 0; i < num_mems; i++) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - data->mems[i].name); - if (!res) { - dev_err(dev, "found no memory resource for %s\n", - data->mems[i].name); - return -EINVAL; - } - if (!devm_request_mem_region(dev, res->start, - resource_size(res), - dev_name(dev))) { - dev_err(dev, "could not request %s region for resource\n", - data->mems[i].name); - return -EBUSY; - } - - kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start, - resource_size(res)); - if (!kproc->mem[i].cpu_addr) { - dev_err(dev, "failed to map %s memory\n", - data->mems[i].name); - return -ENOMEM; - } - kproc->mem[i].bus_addr = res->start; - kproc->mem[i].dev_addr = data->mems[i].dev_addr; - kproc->mem[i].size = resource_size(res); - - dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n", - data->mems[i].name, &kproc->mem[i].bus_addr, - kproc->mem[i].size, kproc->mem[i].cpu_addr, - kproc->mem[i].dev_addr); - } - kproc->num_mems = num_mems; - - return 0; -} - -static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc) -{ - struct device *dev = kproc->dev; - struct device_node *np = dev->of_node; - struct device_node *rmem_np; - struct reserved_mem *rmem; - int num_rmems; - int ret, i; - - num_rmems = of_property_count_elems_of_size(np, "memory-region", - sizeof(phandle)); - if (num_rmems < 0) { - dev_err(dev, "device does not reserved memory regions (%pe)\n", - ERR_PTR(num_rmems)); - return -EINVAL; - } - if (num_rmems < 2) { - dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n", - num_rmems); - return -EINVAL; - } - - /* use reserved memory region 0 for vring DMA allocations */ - ret = of_reserved_mem_device_init_by_idx(dev, np, 0); - if (ret) { - dev_err(dev, "device cannot initialize DMA pool (%pe)\n", - ERR_PTR(ret)); - return ret; - } - - num_rmems--; - kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL); - if (!kproc->rmem) { - ret = -ENOMEM; - goto release_rmem; - } - - /* use remaining reserved memory regions for static carveouts */ - for (i = 0; i < num_rmems; i++) { - rmem_np = of_parse_phandle(np, "memory-region", i + 1); - if (!rmem_np) { - ret = -EINVAL; - goto unmap_rmem; - } - - rmem = of_reserved_mem_lookup(rmem_np); - if (!rmem) { - of_node_put(rmem_np); - ret = -EINVAL; - goto unmap_rmem; - } - of_node_put(rmem_np); - - kproc->rmem[i].bus_addr = rmem->base; - /* 64-bit address regions currently not supported */ - kproc->rmem[i].dev_addr = (u32)rmem->base; - kproc->rmem[i].size = rmem->size; - kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size); - if (!kproc->rmem[i].cpu_addr) { - dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n", - i + 1, &rmem->base, &rmem->size); - ret = -ENOMEM; - goto unmap_rmem; - } - - dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", - i + 1, &kproc->rmem[i].bus_addr, - kproc->rmem[i].size, kproc->rmem[i].cpu_addr, - kproc->rmem[i].dev_addr); - } - kproc->num_rmems = num_rmems; - - return 0; - -unmap_rmem: - for (i--; i >= 0; i--) - iounmap(kproc->rmem[i].cpu_addr); - kfree(kproc->rmem); -release_rmem: - of_reserved_mem_device_release(kproc->dev); - return ret; -} - -static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc) -{ - int i; - - for (i = 0; i < kproc->num_rmems; i++) - iounmap(kproc->rmem[i].cpu_addr); - kfree(kproc->rmem); - - of_reserved_mem_device_release(kproc->dev); -} - -static -struct ti_sci_proc *k3_dsp_rproc_of_get_tsp(struct device *dev, - const struct ti_sci_handle *sci) -{ - struct ti_sci_proc *tsp; - u32 temp[2]; - int ret; - - ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids", - temp, 2); - if (ret < 0) - return ERR_PTR(ret); - - tsp = kzalloc(sizeof(*tsp), GFP_KERNEL); - if (!tsp) - return ERR_PTR(-ENOMEM); - - tsp->dev = dev; - tsp->sci = sci; - tsp->ops = &sci->ops.proc_ops; - tsp->proc_id = temp[0]; - tsp->host_id = temp[1]; - - return tsp; -} - -static int k3_dsp_rproc_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - const struct k3_dsp_dev_data *data; - struct k3_dsp_rproc *kproc; - struct rproc *rproc; - const char *fw_name; - bool p_state = false; - int ret = 0; - int ret1; - - data = of_device_get_match_data(dev); - if (!data) - return -ENODEV; - - ret = rproc_of_parse_firmware(dev, 0, &fw_name); - if (ret) - return dev_err_probe(dev, ret, "failed to parse firmware-name property\n"); - - rproc = rproc_alloc(dev, dev_name(dev), &k3_dsp_rproc_ops, fw_name, - sizeof(*kproc)); - if (!rproc) - return -ENOMEM; - - rproc->has_iommu = false; - rproc->recovery_disabled = true; - if (data->uses_lreset) { - rproc->ops->prepare = k3_dsp_rproc_prepare; - rproc->ops->unprepare = k3_dsp_rproc_unprepare; - } - kproc = rproc->priv; - kproc->rproc = rproc; - kproc->dev = dev; - kproc->data = data; - - kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci"); - if (IS_ERR(kproc->ti_sci)) { - ret = dev_err_probe(dev, PTR_ERR(kproc->ti_sci), - "failed to get ti-sci handle\n"); - kproc->ti_sci = NULL; - goto free_rproc; - } - - ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id); - if (ret) { - dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n"); - goto put_sci; - } - - kproc->reset = devm_reset_control_get_exclusive(dev, NULL); - if (IS_ERR(kproc->reset)) { - ret = dev_err_probe(dev, PTR_ERR(kproc->reset), - "failed to get reset\n"); - goto put_sci; - } - - kproc->tsp = k3_dsp_rproc_of_get_tsp(dev, kproc->ti_sci); - if (IS_ERR(kproc->tsp)) { - ret = dev_err_probe(dev, PTR_ERR(kproc->tsp), - "failed to construct ti-sci proc control\n"); - goto put_sci; - } - - ret = ti_sci_proc_request(kproc->tsp); - if (ret < 0) { - dev_err_probe(dev, ret, "ti_sci_proc_request failed\n"); - goto free_tsp; - } - - ret = k3_dsp_rproc_of_get_memories(pdev, kproc); - if (ret) - goto release_tsp; - - ret = k3_dsp_reserved_mem_init(kproc); - if (ret) { - dev_err_probe(dev, ret, "reserved memory init failed\n"); - goto release_tsp; - } - - ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id, - NULL, &p_state); - if (ret) { - dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n"); - goto release_mem; - } - - /* configure J721E devices for either remoteproc or IPC-only mode */ - if (p_state) { - dev_info(dev, "configured DSP for IPC-only mode\n"); - rproc->state = RPROC_DETACHED; - /* override rproc ops with only required IPC-only mode ops */ - rproc->ops->prepare = NULL; - rproc->ops->unprepare = NULL; - rproc->ops->start = NULL; - rproc->ops->stop = NULL; - rproc->ops->attach = k3_dsp_rproc_attach; - rproc->ops->detach = k3_dsp_rproc_detach; - rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table; - } else { - dev_info(dev, "configured DSP for remoteproc mode\n"); - /* - * ensure the DSP local reset is asserted to ensure the DSP - * doesn't execute bogus code in .prepare() when the module - * reset is released. - */ - if (data->uses_lreset) { - ret = reset_control_status(kproc->reset); - if (ret < 0) { - dev_err_probe(dev, ret, "failed to get reset status\n"); - goto release_mem; - } else if (ret == 0) { - dev_warn(dev, "local reset is deasserted for device\n"); - k3_dsp_rproc_reset(kproc); - } - } - } - - ret = rproc_add(rproc); - if (ret) { - dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n"); - goto release_mem; - } - - platform_set_drvdata(pdev, kproc); - - return 0; - -release_mem: - k3_dsp_reserved_mem_exit(kproc); -release_tsp: - ret1 = ti_sci_proc_release(kproc->tsp); - if (ret1) - dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret1)); -free_tsp: - kfree(kproc->tsp); -put_sci: - ret1 = ti_sci_put_handle(kproc->ti_sci); - if (ret1) - dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret1)); -free_rproc: - rproc_free(rproc); - return ret; -} - -static void k3_dsp_rproc_remove(struct platform_device *pdev) -{ - struct k3_dsp_rproc *kproc = platform_get_drvdata(pdev); - struct rproc *rproc = kproc->rproc; - struct device *dev = &pdev->dev; - int ret; - - if (rproc->state == RPROC_ATTACHED) { - ret = rproc_detach(rproc); - if (ret) { - /* Note this error path leaks resources */ - dev_err(dev, "failed to detach proc (%pe)\n", ERR_PTR(ret)); - return; - } - } - - rproc_del(kproc->rproc); - - ret = ti_sci_proc_release(kproc->tsp); - if (ret) - dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret)); - - kfree(kproc->tsp); - - ret = ti_sci_put_handle(kproc->ti_sci); - if (ret) - dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret)); - - k3_dsp_reserved_mem_exit(kproc); - rproc_free(kproc->rproc); -} - -static const struct k3_dsp_mem_data c66_mems[] = { - { .name = "l2sram", .dev_addr = 0x800000 }, - { .name = "l1pram", .dev_addr = 0xe00000 }, - { .name = "l1dram", .dev_addr = 0xf00000 }, -}; - -/* C71x cores only have a L1P Cache, there are no L1P SRAMs */ -static const struct k3_dsp_mem_data c71_mems[] = { - { .name = "l2sram", .dev_addr = 0x800000 }, - { .name = "l1dram", .dev_addr = 0xe00000 }, -}; - -static const struct k3_dsp_mem_data c7xv_mems[] = { - { .name = "l2sram", .dev_addr = 0x800000 }, -}; - -static const struct k3_dsp_dev_data c66_data = { - .mems = c66_mems, - .num_mems = ARRAY_SIZE(c66_mems), - .boot_align_addr = SZ_1K, - .uses_lreset = true, -}; - -static const struct k3_dsp_dev_data c71_data = { - .mems = c71_mems, - .num_mems = ARRAY_SIZE(c71_mems), - .boot_align_addr = SZ_2M, - .uses_lreset = false, -}; - -static const struct k3_dsp_dev_data c7xv_data = { - .mems = c7xv_mems, - .num_mems = ARRAY_SIZE(c7xv_mems), - .boot_align_addr = SZ_2M, - .uses_lreset = false, -}; - -static const struct of_device_id k3_dsp_of_match[] = { - { .compatible = "ti,j721e-c66-dsp", .data = &c66_data, }, - { .compatible = "ti,j721e-c71-dsp", .data = &c71_data, }, - { .compatible = "ti,j721s2-c71-dsp", .data = &c71_data, }, - { .compatible = "ti,am62a-c7xv-dsp", .data = &c7xv_data, }, - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, k3_dsp_of_match); - -static struct platform_driver k3_dsp_rproc_driver = { - .probe = k3_dsp_rproc_probe, - .remove_new = k3_dsp_rproc_remove, - .driver = { - .name = "k3-dsp-rproc", - .of_match_table = k3_dsp_of_match, - }, -}; - -module_platform_driver(k3_dsp_rproc_driver); - -MODULE_AUTHOR("Suman Anna "); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("TI K3 DSP Remoteproc driver"); +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI K3 DSP Remote Processor(s) driver + * + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Suman Anna + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap_remoteproc.h" +#include "remoteproc_internal.h" +#include "ti_sci_proc.h" +#include "ti_k3_common.h" + +/* + * Power up the DSP remote processor. + * + * This function will be invoked only after the firmware for this rproc + * was loaded, parsed successfully, and all of its resource requirements + * were met. This callback is invoked only in remoteproc mode. + */ +static int k3_dsp_rproc_start(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + u32 boot_addr; + int ret; + + ret = k3_rproc_request_mbox(rproc); + if (ret) + return ret; + + boot_addr = rproc->bootaddr; + if (boot_addr & (kproc->data->boot_align_addr - 1)) { + dev_err(dev, "invalid boot address 0x%x, must be aligned on a 0x%x boundary\n", + boot_addr, kproc->data->boot_align_addr); + ret = -EINVAL; + goto put_mbox; + } + + dev_err(dev, "booting DSP core using boot addr = 0x%x\n", boot_addr); + ret = ti_sci_proc_set_config(kproc->tsp, boot_addr, 0, 0); + if (ret) + goto put_mbox; + + ret = k3_rproc_release(kproc); + if (ret) + goto put_mbox; + + return 0; + +put_mbox: + mbox_free_channel(kproc->mbox); + return ret; +} + +/* + * Stop the DSP remote processor. + * + * This function puts the DSP processor into reset, and finishes processing + * of any pending messages. This callback is invoked only in remoteproc mode. + */ +static int k3_dsp_rproc_stop(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + + mbox_free_channel(kproc->mbox); + + k3_rproc_reset(kproc); + + return 0; +} + +/* + * Attach to a running DSP remote processor (IPC-only mode) + * + * This rproc attach callback only needs to request the mailbox, the remote + * processor is already booted, so there is no need to issue any TI-SCI + * commands to boot the DSP core. This callback is invoked only in IPC-only + * mode. + */ +static int k3_dsp_rproc_attach(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = k3_rproc_request_mbox(rproc); + if (ret) + return ret; + + dev_info(dev, "DSP initialized in IPC-only mode\n"); + return 0; +} + +/* + * Detach from a running DSP remote processor (IPC-only mode) + * + * This rproc detach callback performs the opposite operation to attach callback + * and only needs to release the mailbox, the DSP core is not stopped and will + * be left to continue to run its booted firmware. This callback is invoked only + * in IPC-only mode. + */ +static int k3_dsp_rproc_detach(struct rproc *rproc) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + mbox_free_channel(kproc->mbox); + dev_info(dev, "DSP deinitialized in IPC-only mode\n"); + return 0; +} + + +static const struct rproc_ops k3_dsp_rproc_ops = { + .start = k3_dsp_rproc_start, + .stop = k3_dsp_rproc_stop, + .kick = k3_rproc_kick, + .da_to_va = k3_rproc_da_to_va, +}; + +static int k3_dsp_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct k3_rproc_dev_data *data; + struct k3_rproc *kproc; + struct rproc *rproc; + const char *fw_name; + bool p_state = false; + int ret = 0; + int ret1; + + data = of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + ret = rproc_of_parse_firmware(dev, 0, &fw_name); + if (ret) + return dev_err_probe(dev, ret, "failed to parse firmware-name property\n"); + + rproc = rproc_alloc(dev, dev_name(dev), &k3_dsp_rproc_ops, fw_name, + sizeof(*kproc)); + if (!rproc) + return -ENOMEM; + + rproc->has_iommu = false; + rproc->recovery_disabled = true; + if (data->uses_lreset) { + rproc->ops->prepare = k3_rproc_prepare; + rproc->ops->unprepare = k3_rproc_unprepare; + } + kproc = rproc->priv; + kproc->rproc = rproc; + kproc->dev = dev; + kproc->data = data; + + kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci"); + if (IS_ERR(kproc->ti_sci)) { + ret = dev_err_probe(dev, PTR_ERR(kproc->ti_sci), + "failed to get ti-sci handle\n"); + kproc->ti_sci = NULL; + goto free_rproc; + } + + ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id); + if (ret) { + dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n"); + goto put_sci; + } + + kproc->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(kproc->reset)) { + ret = dev_err_probe(dev, PTR_ERR(kproc->reset), + "failed to get reset\n"); + goto put_sci; + } + + kproc->tsp = k3_rproc_of_get_tsp(dev, kproc->ti_sci); + if (IS_ERR(kproc->tsp)) { + ret = dev_err_probe(dev, PTR_ERR(kproc->tsp), + "failed to construct ti-sci proc control\n"); + goto put_sci; + } + + ret = ti_sci_proc_request(kproc->tsp); + if (ret < 0) { + dev_err_probe(dev, ret, "ti_sci_proc_request failed\n"); + goto free_tsp; + } + + ret = k3_rproc_of_get_memories(pdev, kproc); + if (ret) + goto release_tsp; + + ret = k3_reserved_mem_init(kproc); + if (ret) { + dev_err_probe(dev, ret, "reserved memory init failed\n"); + goto release_tsp; + } + + ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id, + NULL, &p_state); + if (ret) { + dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n"); + goto release_mem; + } + + /* configure J721E devices for either remoteproc or IPC-only mode */ + if (p_state) { + dev_info(dev, "configured DSP for IPC-only mode\n"); + rproc->state = RPROC_DETACHED; + /* override rproc ops with only required IPC-only mode ops */ + rproc->ops->prepare = NULL; + rproc->ops->unprepare = NULL; + rproc->ops->start = NULL; + rproc->ops->stop = NULL; + rproc->ops->attach = k3_dsp_rproc_attach; + rproc->ops->detach = k3_dsp_rproc_detach; + rproc->ops->get_loaded_rsc_table = k3_get_loaded_rsc_table; + } else { + dev_info(dev, "configured DSP for remoteproc mode\n"); + /* + * ensure the DSP local reset is asserted to ensure the DSP + * doesn't execute bogus code in .prepare() when the module + * reset is released. + */ + if (data->uses_lreset) { + ret = reset_control_status(kproc->reset); + if (ret < 0) { + dev_err_probe(dev, ret, "failed to get reset status\n"); + goto release_mem; + } else if (ret == 0) { + dev_warn(dev, "local reset is deasserted for device\n"); + k3_rproc_reset(kproc); + } + } + } + + ret = rproc_add(rproc); + if (ret) { + dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n"); + goto release_mem; + } + + platform_set_drvdata(pdev, kproc); + + return 0; + +release_mem: + k3_reserved_mem_exit(kproc); +release_tsp: + ret1 = ti_sci_proc_release(kproc->tsp); + if (ret1) + dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret1)); +free_tsp: + kfree(kproc->tsp); +put_sci: + ret1 = ti_sci_put_handle(kproc->ti_sci); + if (ret1) + dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret1)); +free_rproc: + rproc_free(rproc); + return ret; +} + +static void k3_dsp_rproc_remove(struct platform_device *pdev) +{ + struct k3_rproc *kproc = platform_get_drvdata(pdev); + struct rproc *rproc = kproc->rproc; + struct device *dev = &pdev->dev; + int ret; + + if (rproc->state == RPROC_ATTACHED) { + ret = rproc_detach(rproc); + if (ret) { + /* Note this error path leaks resources */ + dev_err(dev, "failed to detach proc (%pe)\n", ERR_PTR(ret)); + return; + } + } + + rproc_del(kproc->rproc); + + ret = ti_sci_proc_release(kproc->tsp); + if (ret) + dev_err(dev, "failed to release proc (%pe)\n", ERR_PTR(ret)); + + kfree(kproc->tsp); + + ret = ti_sci_put_handle(kproc->ti_sci); + if (ret) + dev_err(dev, "failed to put ti_sci handle (%pe)\n", ERR_PTR(ret)); + + k3_reserved_mem_exit(kproc); + rproc_free(kproc->rproc); +} + +static const struct k3_rproc_mem_data c66_mems[] = { + { .name = "l2sram", .dev_addr = 0x800000 }, + { .name = "l1pram", .dev_addr = 0xe00000 }, + { .name = "l1dram", .dev_addr = 0xf00000 }, +}; + +/* C71x cores only have a L1P Cache, there are no L1P SRAMs */ +static const struct k3_rproc_mem_data c71_mems[] = { + { .name = "l2sram", .dev_addr = 0x800000 }, + { .name = "l1dram", .dev_addr = 0xe00000 }, +}; + +static const struct k3_rproc_mem_data c7xv_mems[] = { + { .name = "l2sram", .dev_addr = 0x800000 }, +}; + +static const struct k3_rproc_dev_data c66_data = { + .mems = c66_mems, + .num_mems = ARRAY_SIZE(c66_mems), + .boot_align_addr = SZ_1K, + .uses_lreset = true, +}; + +static const struct k3_rproc_dev_data c71_data = { + .mems = c71_mems, + .num_mems = ARRAY_SIZE(c71_mems), + .boot_align_addr = SZ_2M, + .uses_lreset = false, +}; + +static const struct k3_rproc_dev_data c7xv_data = { + .mems = c7xv_mems, + .num_mems = ARRAY_SIZE(c7xv_mems), + .boot_align_addr = SZ_2M, + .uses_lreset = false, +}; + +static const struct of_device_id k3_dsp_of_match[] = { + { .compatible = "ti,j721e-c66-dsp", .data = &c66_data, }, + { .compatible = "ti,j721e-c71-dsp", .data = &c71_data, }, + { .compatible = "ti,j721s2-c71-dsp", .data = &c71_data, }, + { .compatible = "ti,am62a-c7xv-dsp", .data = &c7xv_data, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, k3_dsp_of_match); + +static struct platform_driver k3_dsp_rproc_driver = { + .probe = k3_dsp_rproc_probe, + .remove_new = k3_dsp_rproc_remove, + .driver = { + .name = "k3-dsp-rproc", + .of_match_table = k3_dsp_of_match, + }, +}; + +module_platform_driver(k3_dsp_rproc_driver); + +MODULE_AUTHOR("Suman Anna "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI K3 DSP Remoteproc driver");