[net-next,v6,15/15] net: ravb: Simplify ravb_resume()
Commit Message
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Remove explicit calls to functions that are called by ravb_open(). There is
no need to have them doubled now that the ravb_open() already contains
what is needed for the interface configuration. Along with it,
configurations needed by PTP were moved to ravb_wol_restore(). With this,
code in ravb_resume() becomes simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
---
Changes in v6:
- re-arranged the tags as my b4 am/shazam placed the Rb tags
before author's Sob tag
Changes in v5:
- none
Changes in v4:
- none
Changes in v3:
- fixed typos in patch description
- collected tags
Changes in v2:
- none; this patch is new
drivers/net/ethernet/renesas/ravb_main.c | 58 ++++++++++--------------
1 file changed, 24 insertions(+), 34 deletions(-)
@@ -2939,6 +2939,20 @@ static int ravb_wol_restore(struct net_device *ndev)
{
struct ravb_private *priv = netdev_priv(ndev);
const struct ravb_hw_info *info = priv->info;
+ int error;
+
+ /* Set reset mode to rearm the WoL logic. */
+ error = ravb_set_opmode(ndev, CCC_OPC_RESET);
+ if (error)
+ return error;
+
+ /* Set AVB config mode. */
+ error = ravb_set_config_mode(ndev);
+ if (error)
+ return error;
+
+ if (priv->info->ccc_gac)
+ ravb_ptp_init(ndev, priv->pdev);
if (info->nc_queues)
napi_enable(&priv->napi[RAVB_NC]);
@@ -2978,53 +2992,29 @@ static int ravb_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct ravb_private *priv = netdev_priv(ndev);
- const struct ravb_hw_info *info = priv->info;
int ret;
ret = reset_control_deassert(priv->rstc);
if (ret)
return ret;
- /* If WoL is enabled set reset mode to rearm the WoL logic */
+ if (!netif_running(ndev))
+ return 0;
+
+ /* If WoL is enabled restore the interface. */
if (priv->wol_enabled) {
- ret = ravb_set_opmode(ndev, CCC_OPC_RESET);
+ ret = ravb_wol_restore(ndev);
if (ret)
return ret;
}
- /* All register have been reset to default values.
- * Restore all registers which where setup at probe time and
- * reopen device if it was running before system suspended.
- */
-
- /* Set AVB config mode */
- ret = ravb_set_config_mode(ndev);
- if (ret)
+ /* Reopening the interface will restore the device to the working state. */
+ ret = ravb_open(ndev);
+ if (ret < 0)
return ret;
- ravb_set_gti(ndev);
-
- if (info->internal_delay)
- ravb_set_delay_mode(ndev);
-
- /* Restore descriptor base address table */
- ravb_write(ndev, priv->desc_bat_dma, DBAT);
-
- if (priv->info->ccc_gac)
- ravb_ptp_init(ndev, priv->pdev);
-
- if (netif_running(ndev)) {
- if (priv->wol_enabled) {
- ret = ravb_wol_restore(ndev);
- if (ret)
- return ret;
- }
- ret = ravb_open(ndev);
- if (ret < 0)
- return ret;
- ravb_set_rx_mode(ndev);
- netif_device_attach(ndev);
- }
+ ravb_set_rx_mode(ndev);
+ netif_device_attach(ndev);
return ret;
}