[1/3] arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS)
Commit Message
Add Display SubSystem (DSS) DT node for the AM62A7 SoC.
The DSS supports one each of video pipeline (vid) and video-lite
pipeline (vidl1). The video port 1 (vp1) is tied-off in AM62A SoC, but
the pipeline remains active. The video port 2 (vp2) outputs the DPI
signals. Both the video ports are connected to the pipelines via 2
identical overlay managers (ovr1 and ovr2).
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
@@ -985,4 +985,29 @@ dphy0: phy@30110000 {
power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
+
+ dss: dss@30200000 {
+ compatible = "ti,am62a7-dss";
+ reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+ <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+ <0x00 0x30206000 0x00 0x1000>, /* vid */
+ <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+ <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+ <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */
+ <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+ reg-names = "common", "vidl1", "vid",
+ "ovr1", "ovr2", "vp1", "vp2";
+ power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 186 6>,
+ <&k3_clks 186 0>,
+ <&k3_clks 186 2>;
+ clock-names = "fck", "vp1", "vp2";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ dss_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};