diff mbox series

[21/28] percpu-refcount.h: move declarations to percpu-refcount_types.h

Message ID 20240131145008.1345531-22-max.kellermann@ionos.com
State New
Headers
Series Fast kernel headers: reduce header dependencies |

Commit Message

Max Kellermann Jan. 31, 2024, 2:50 p.m. UTC 
  By providing declarations in a lean header, we can reduce header
dependencies.

Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
---
 drivers/target/target_core_alua.c     |  1 +
 drivers/target/target_core_pr.c       |  1 +
 drivers/target/target_core_xcopy.c    |  1 +
 include/linux/blkdev.h                |  2 +-
 include/linux/bpf-cgroup-defs.h       |  2 +-
 include/linux/bpf.h                   |  2 +-
 include/linux/cgroup-defs.h           |  2 +-
 include/linux/cgroup.h                |  1 +
 include/linux/percpu-refcount.h       | 64 +-----------------------
 include/linux/percpu-refcount_types.h | 71 +++++++++++++++++++++++++++
 include/linux/slab.h                  |  1 -
 include/target/target_core_base.h     |  2 +-
 12 files changed, 81 insertions(+), 69 deletions(-)
 create mode 100644 include/linux/percpu-refcount_types.h
diff mbox series

Patch

diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 01751faad386..f908e5562094 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -18,6 +18,7 @@ 
 #include <linux/fcntl.h>
 #include <linux/file.h>
 #include <linux/fs.h>
+#include <linux/percpu-refcount.h>
 #include <scsi/scsi_proto.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index a566d4d38192..19057040b7a1 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -19,6 +19,7 @@ 
 #include <linux/fcntl.h>
 #include <linux/fs.h>
 #include <linux/kref.h>
+#include <linux/percpu-refcount.h>
 #include <scsi/scsi_proto.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c
index c822f57daa39..232d84743b89 100644
--- a/drivers/target/target_core_xcopy.c
+++ b/drivers/target/target_core_xcopy.c
@@ -18,6 +18,7 @@ 
 #include <linux/rculist.h>
 #include <linux/completion.h>
 #include <linux/configfs.h>
+#include <linux/percpu-refcount.h>
 #include <linux/ratelimit.h>
 #include <scsi/scsi_proto.h>
 #include <asm/unaligned.h>
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 09e8f023070c..bc108e5fcec0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -18,7 +18,7 @@ 
 #include <linux/gfp_types.h>
 #include <linux/kdev_t.h>
 #include <linux/rcupdate.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
 #include <linux/blkzoned.h>
 #include <linux/sched.h>
 #include <linux/uio.h> // for iov_iter_is_aligned()
diff --git a/include/linux/bpf-cgroup-defs.h b/include/linux/bpf-cgroup-defs.h
index f3b400858129..70b79fd81fee 100644
--- a/include/linux/bpf-cgroup-defs.h
+++ b/include/linux/bpf-cgroup-defs.h
@@ -5,7 +5,7 @@ 
 #ifdef CONFIG_CGROUP_BPF
 
 #include <linux/list.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
 #include <linux/workqueue_types.h>
 
 struct bpf_prog_array;
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 40fce6ce3de9..b6e38331acfd 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -21,7 +21,7 @@ 
 #include <linux/capability.h>
 #include <linux/sched/mm.h>
 #include <linux/slab.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
 #include <linux/stddef.h>
 #include <linux/bpfptr.h>
 #include <linux/btf.h>
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 99e24f3034df..878deefba0e1 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -15,7 +15,7 @@ 
 #include <linux/mutex_types.h>
 #include <linux/rcupdate.h>
 #include <linux/refcount_types.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
 #include <linux/percpu-rwsem.h>
 #include <linux/u64_stats_sync.h>
 #include <linux/workqueue.h>
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 24dcff53bd05..19a5e801f77d 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -21,6 +21,7 @@ 
 #include <linux/ns_common.h>
 #include <linux/nsproxy.h>
 #include <linux/user_namespace.h>
+#include <linux/percpu-refcount.h>
 #include <linux/refcount.h>
 #include <linux/kernel_stat.h>
 
diff --git a/include/linux/percpu-refcount.h b/include/linux/percpu-refcount.h
index dd2f19ea08bd..ded13def0acd 100644
--- a/include/linux/percpu-refcount.h
+++ b/include/linux/percpu-refcount.h
@@ -50,74 +50,12 @@ 
 #ifndef _LINUX_PERCPU_REFCOUNT_H
 #define _LINUX_PERCPU_REFCOUNT_H
 
-#include <linux/atomic.h>
+#include <linux/percpu-refcount_types.h>
 #include <linux/percpu.h>
 #include <linux/rcupdate.h>
 #include <linux/types.h>
 #include <linux/gfp_types.h>
 
-struct percpu_ref;
-typedef void (percpu_ref_func_t)(struct percpu_ref *);
-
-/* flags set in the lower bits of percpu_ref->percpu_count_ptr */
-enum {
-	__PERCPU_REF_ATOMIC	= 1LU << 0,	/* operating in atomic mode */
-	__PERCPU_REF_DEAD	= 1LU << 1,	/* (being) killed */
-	__PERCPU_REF_ATOMIC_DEAD = __PERCPU_REF_ATOMIC | __PERCPU_REF_DEAD,
-
-	__PERCPU_REF_FLAG_BITS	= 2,
-};
-
-/* @flags for percpu_ref_init() */
-enum {
-	/*
-	 * Start w/ ref == 1 in atomic mode.  Can be switched to percpu
-	 * operation using percpu_ref_switch_to_percpu().  If initialized
-	 * with this flag, the ref will stay in atomic mode until
-	 * percpu_ref_switch_to_percpu() is invoked on it.
-	 * Implies ALLOW_REINIT.
-	 */
-	PERCPU_REF_INIT_ATOMIC	= 1 << 0,
-
-	/*
-	 * Start dead w/ ref == 0 in atomic mode.  Must be revived with
-	 * percpu_ref_reinit() before used.  Implies INIT_ATOMIC and
-	 * ALLOW_REINIT.
-	 */
-	PERCPU_REF_INIT_DEAD	= 1 << 1,
-
-	/*
-	 * Allow switching from atomic mode to percpu mode.
-	 */
-	PERCPU_REF_ALLOW_REINIT	= 1 << 2,
-};
-
-struct percpu_ref_data {
-	atomic_long_t		count;
-	percpu_ref_func_t	*release;
-	percpu_ref_func_t	*confirm_switch;
-	bool			force_atomic:1;
-	bool			allow_reinit:1;
-	struct rcu_head		rcu;
-	struct percpu_ref	*ref;
-};
-
-struct percpu_ref {
-	/*
-	 * The low bit of the pointer indicates whether the ref is in percpu
-	 * mode; if set, then get/put will manipulate the atomic_t.
-	 */
-	unsigned long		percpu_count_ptr;
-
-	/*
-	 * 'percpu_ref' is often embedded into user structure, and only
-	 * 'percpu_count_ptr' is required in fast path, move other fields
-	 * into 'percpu_ref_data', so we can reduce memory footprint in
-	 * fast path.
-	 */
-	struct percpu_ref_data  *data;
-};
-
 int __must_check percpu_ref_init(struct percpu_ref *ref,
 				 percpu_ref_func_t *release, unsigned int flags,
 				 gfp_t gfp);
diff --git a/include/linux/percpu-refcount_types.h b/include/linux/percpu-refcount_types.h
new file mode 100644
index 000000000000..9f4f93e8faaf
--- /dev/null
+++ b/include/linux/percpu-refcount_types.h
@@ -0,0 +1,71 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_PERCPU_REFCOUNT_TYPES_H
+#define _LINUX_PERCPU_REFCOUNT_TYPES_H
+
+#include <linux/atomic.h>
+#include <linux/types.h>
+
+struct percpu_ref;
+typedef void (percpu_ref_func_t)(struct percpu_ref *);
+
+/* flags set in the lower bits of percpu_ref->percpu_count_ptr */
+enum {
+	__PERCPU_REF_ATOMIC	= 1LU << 0,	/* operating in atomic mode */
+	__PERCPU_REF_DEAD	= 1LU << 1,	/* (being) killed */
+	__PERCPU_REF_ATOMIC_DEAD = __PERCPU_REF_ATOMIC | __PERCPU_REF_DEAD,
+
+	__PERCPU_REF_FLAG_BITS	= 2,
+};
+
+/* @flags for percpu_ref_init() */
+enum {
+	/*
+	 * Start w/ ref == 1 in atomic mode.  Can be switched to percpu
+	 * operation using percpu_ref_switch_to_percpu().  If initialized
+	 * with this flag, the ref will stay in atomic mode until
+	 * percpu_ref_switch_to_percpu() is invoked on it.
+	 * Implies ALLOW_REINIT.
+	 */
+	PERCPU_REF_INIT_ATOMIC	= 1 << 0,
+
+	/*
+	 * Start dead w/ ref == 0 in atomic mode.  Must be revived with
+	 * percpu_ref_reinit() before used.  Implies INIT_ATOMIC and
+	 * ALLOW_REINIT.
+	 */
+	PERCPU_REF_INIT_DEAD	= 1 << 1,
+
+	/*
+	 * Allow switching from atomic mode to percpu mode.
+	 */
+	PERCPU_REF_ALLOW_REINIT	= 1 << 2,
+};
+
+struct percpu_ref_data {
+	atomic_long_t		count;
+	percpu_ref_func_t	*release;
+	percpu_ref_func_t	*confirm_switch;
+	bool			force_atomic:1;
+	bool			allow_reinit:1;
+	struct rcu_head		rcu;
+	struct percpu_ref	*ref;
+};
+
+struct percpu_ref {
+	/*
+	 * The low bit of the pointer indicates whether the ref is in percpu
+	 * mode; if set, then get/put will manipulate the atomic_t.
+	 */
+	unsigned long		percpu_count_ptr;
+
+	/*
+	 * 'percpu_ref' is often embedded into user structure, and only
+	 * 'percpu_count_ptr' is required in fast path, move other fields
+	 * into 'percpu_ref_data', so we can reduce memory footprint in
+	 * fast path.
+	 */
+	struct percpu_ref_data  *data;
+};
+
+#endif
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 63c8b1ce6133..95439c2e7542 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -16,7 +16,6 @@ 
 #include <linux/gfp_types.h>
 #include <linux/overflow.h>
 #include <linux/types.h>
-#include <linux/percpu-refcount.h>
 #include <linux/cleanup.h>
 #include <linux/hash.h>
 #include <linux/mmzone.h>
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 5b9156adceca..1598a4062398 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -5,7 +5,7 @@ 
 #include <linux/configfs.h>      /* struct config_group */
 #include <linux/dma-direction.h> /* enum dma_data_direction */
 #include <linux/sbitmap.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
 #include <linux/semaphore.h>     /* struct semaphore */
 #include <linux/completion_types.h>