diff mbox series

[v5,07/21] ARM: dts: aspeed: yosemite4: Add gpio pca9506

Message ID	20240131084134.328307-8-Delphine_CC_Chiu@wiwynn.com
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel+bounces-46039-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161; Received-SPF: Fail (protection.outlook.com: domain of wiwynn.com does not designate 211.20.1.79 as permitted sender) receiver=protection.outlook.com; client-ip=211.20.1.79; helo=localhost.localdomain; From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> To: patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@codeconstruct.com.au> Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 07/21] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Date: Wed, 31 Jan 2024 16:41:18 +0800 Message-Id: <20240131084134.328307-8-Delphine_CC_Chiu@wiwynn.com> In-Reply-To: <20240131084134.328307-1-Delphine_CC_Chiu@wiwynn.com> References: <20240131084134.328307-1-Delphine_CC_Chiu@wiwynn.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-MS-Office365-Filtering-Correlation-Id: 70bcf9f2-1725-4bce-a25b-08dc223881d6
Series	Add i2c-mux and eeprom devices for Meta Yosemite 4 \| [v5,00/21] Add i2c-mux and eeprom devices for Meta Yosemite 4 [v5,01/21] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices [v5,02/21] ARM: dts: aspeed: yosemite4: Enable adc15 [v5,03/21] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting [v5,04/21] ARM: dts: aspeed: yosemite4: Enable watchdog2 [v5,05/21] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode [v5,06/21] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change [v5,07/21] ARM: dts: aspeed: yosemite4: Add gpio pca9506 [v5,08/21] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible [v5,09/21] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 [v5,10/21] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading [v5,11/21] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use [v5,12/21] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change [v5,13/21] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change [v5,14/21] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change [v5,15/21] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection [v5,16/21] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state [v5,17/21] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config [v5,18/21] ARM: dts: aspeed: yosemite4: add mctp config for NIC [v5,19/21] ARM: dts: aspeed: yosemite4: support mux to cpld [v5,20/21] ARM: dts: aspeed: yosemite4: support medusa board adc sensors [v5,21/21] ARM: dts: aspeed: yosemite4: support NIC eeprom

Commit Message

Delphine CC Chiu Jan. 31, 2024, 8:41 a.m. UTC

  Add gpio pca9506 I/O expander for yv4 use

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 251 ++++++++++++++++++
 1 file changed, 251 insertions(+)

Comments

Andrew Jeffery Feb. 1, 2024, 5:35 a.m. UTC | #1

On Wed, 2024-01-31 at 16:41 +0800, Delphine CC Chiu wrote:
> Add gpio pca9506 I/O expander for yv4 use

Use for what? It seems like there's a pattern to the additions, it
might be good to discuss that briefly?

Andrew

diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index af9f7067c57c..b1775b5a6782 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -175,6 +175,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -193,6 +221,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -211,6 +267,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -229,6 +313,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -247,6 +359,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -265,6 +405,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -283,6 +451,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -301,6 +497,34 @@  mctp@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
 		compatible = "adi,adm1281";
 		reg = <0x40>;
@@ -683,6 +907,33 @@  rtc@6f {
 &i2c13 {
 	status = "okay";
 	bus-frequency = <400000>;
+	gpio@20 {
+		compatible = "nxp,pca9506";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &i2c14 {