Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function.
This allows to set the correct ITAPDLY for timings that
do not carry out tuning.
Signed-off-by: Judith Mendez <jm@ti.com>
---
drivers/mmc/host/sdhci_am654.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
@@ -321,6 +321,7 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
unsigned char timing = host->mmc->ios.timing;
u32 otap_del_sel;
u32 itap_del_ena;
+ u32 itap_del_sel;
u32 mask, val;
/* Setup Output TAP delay */
@@ -329,12 +330,17 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
val = (0x1 << OTAPDLYENA_SHIFT) | (otap_del_sel << OTAPDLYSEL_SHIFT);
+ /* Setup Input TAP delay */
itap_del_ena = sdhci_am654->itap_del_ena[timing];
+ itap_del_sel = sdhci_am654->itap_del_sel[timing];
- mask |= ITAPDLYENA_MASK;
- val |= (itap_del_ena << ITAPDLYENA_SHIFT);
+ mask |= ITAPDLYENA_MASK | ITAPDLYSEL_MASK;
+ val |= (itap_del_ena << ITAPDLYENA_SHIFT) | (itap_del_sel << ITAPDLYSEL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
+ 1 << ITAPCHGWIN_SHIFT);
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
sdhci_am654->clkbuf_sel);