For DDR52 timing, DLL is enabled but tuning is not carried
out, therefore the ITAPDLY value in PHY CTRL 4 register is
not correct. Fix this by writing ITAPDLY after enabling DLL.
Signed-off-by: Judith Mendez <jm@ti.com>
---
drivers/mmc/host/sdhci_am654.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
@@ -170,7 +170,19 @@ struct sdhci_am654_driver_data {
#define DLL_CALIB (1 << 4)
};
-static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
+static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
+ u32 itapdly)
+{
+ /* Set ITAPCHGWIN before writing to ITAPDLY */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
+ 0x1 << ITAPCHGWIN_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
+ itapdly << ITAPDLYSEL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
+}
+
+static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock,
+ unsigned char timing)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
@@ -236,17 +248,8 @@ static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
dev_err(mmc_dev(host->mmc), "DLL failed to relock\n");
return;
}
-}
-static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
- u32 itapdly)
-{
- /* Set ITAPCHGWIN before writing to ITAPDLY */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
- 1 << ITAPCHGWIN_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
- itapdly << ITAPDLYSEL_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
+ sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing]);
}
static void sdhci_am654_setup_delay_chain(struct sdhci_am654_data *sdhci_am654,
@@ -298,7 +301,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
- sdhci_am654_setup_dll(host, clock);
+ sdhci_am654_setup_dll(host, clock, timing);
sdhci_am654->dll_enable = true;
} else {
sdhci_am654_setup_delay_chain(sdhci_am654, timing);