[RFC,12/13] arm64: dts: ti: k3-am6*: Remove DLL properties for soft phys

Message ID 20240131003714.2779593-13-jm@ti.com
State New
Headers
Series Add tuning algorithm for delay chain |

Commit Message

Judith Mendez Jan. 31, 2024, 12:37 a.m. UTC
  Remove DLL properties which are not applicable for soft phys
since they do not have a DLL to enable.

Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi       | 3 ---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi      | 1 -
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts        | 1 -
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts        | 1 -
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 --
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi       | 1 -
 arch/arm64/boot/dts/ti/k3-am642-evm.dts        | 1 -
 arch/arm64/boot/dts/ti/k3-am642-sk.dts         | 1 -
 9 files changed, 14 deletions(-)
  

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index d10a02ede06c..ca825088970f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -561,7 +561,6 @@  sdhci0: mmc@fa10000 {
 		assigned-clock-parents = <&k3_clks 57 8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		ti,trm-icp = <0x2>;
 		bus-width = <8>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
@@ -577,7 +576,6 @@  sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
 		ti,otap-del-sel-legacy = <0x0>;
@@ -601,7 +599,6 @@  sdhci2: mmc@fa20000 {
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index eadbdd9ffe37..f69dbf9b8406 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -827,7 +827,6 @@  &sdhci0 {
 	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	status = "okay";
 };
@@ -840,7 +839,6 @@  &sdhci1 {
 
 	vmmc-supply = <&vdd_3v3_sd>;
 	vqmmc-supply = <&vdd_sd_dv>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
 	cd-debounce-delay-ms = <100>;
@@ -857,7 +855,6 @@  &sdhci2 {
 	ti,fails-without-test-cd;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,driver-strength-ohm = <50>;
 	assigned-clocks = <&k3_clks 157 158>;
 	assigned-clock-parents = <&k3_clks 157 160>;
 	#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 227e7fb3e5bb..db5a7746c82e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -561,7 +561,6 @@  sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 2497acc0dd60..74816e08a15e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -507,7 +507,6 @@  &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 10156a04a92c..9e37e54f141a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -426,7 +426,6 @@  &sdhci1 {
 	vqmmc-supply = <&vddshv_sdio>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 33768c02d8eb..6dd48c826f74 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -411,7 +411,6 @@  &sdhci0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -421,7 +420,6 @@  &sdhci1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index b355d0a715a9..1842f05ac351 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -646,7 +646,6 @@  sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 8c5651d2cf5d..0583ec3a9b52 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -508,7 +508,6 @@  &sdhci1 {
 	pinctrl-names = "default";
 	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1dddd6fc1a0d..c3a77f6282cb 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -471,7 +471,6 @@  &sdhci1 {
 	pinctrl-names = "default";
 	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };