diff mbox series

[v4,18/18] MIPS: mobileye: eyeq5: add pinctrl properties to UART nodes

Message ID 20240131-mbly-clk-v4-18-bcd00510d6a0@bootlin.com
State New
Headers
Series Add support for Mobileye EyeQ5 system controller |

Commit Message

Théo Lebrun Jan. 31, 2024, 4:26 p.m. UTC 
  UART nodes are present in the platform devicetree. Add pinctrl to them
now that the pin controller is supported.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index ae13e8299994..643bbc55e2b5 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -79,6 +79,8 @@  uart0: serial@800000 {
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
 			resets = <&reset 0 10>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
 		};
 
 		uart1: serial@900000 {
@@ -90,6 +92,8 @@  uart1: serial@900000 {
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
 			resets = <&reset 0 11>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
 		};
 
 		uart2: serial@a00000 {
@@ -101,6 +105,8 @@  uart2: serial@a00000 {
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
 			resets = <&reset 0 12>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
 		};
 
 		olb: system-controller@e00000 {