diff mbox series

[v2,1/6] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on

Message ID 20240130093812.1746512-2-andre.draszik@linaro.org
State New
Headers
Series gs101 oriole: peripheral block 0 (peric0) fixes |

Commit Message

André Draszik Jan. 30, 2024, 9:36 a.m. UTC 
  This pclk clock is required any time we access the pinctrl registers of
this block.

Since pinctrl-samsung doesn't support a clock at the moment, we just
keep the kernel from disabling it at boot, until we have an update for
pinctrl-samsung to handle this required clock, at which point we'll be
able to drop the flag again.

Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>

---
v2: collect Reviewed-by: tags
---
 drivers/clk/samsung/clk-gs101.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Feb. 1, 2024, 9:58 a.m. UTC | #1 
On 30/01/2024 10:36, André Draszik wrote:
> This pclk clock is required any time we access the pinctrl registers of
> this block.
> 
> Since pinctrl-samsung doesn't support a clock at the moment, we just
> keep the kernel from disabling it at boot, until we have an update for
> pinctrl-samsung to handle this required clock, at which point we'll be
> able to drop the flag again.
> 
> Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")

Dropped fixes tag. The driver looks correct, it's pinctrl issue.

I really dislike how these patches are inter-mixed with DTS. Makes
applying difficult and confuses about dependencies.

I assume there are no dependencies here.

I am repeating this and repeating, but in future I will just reject the
patches:

Your DTS and driver changes cannot depend on each other for new feature
submissions.

Best regards,
Krzysztof
Krzysztof Kozlowski Feb. 1, 2024, 10:36 a.m. UTC | #2 
On Tue, 30 Jan 2024 09:36:40 +0000, André Draszik wrote:
> This pclk clock is required any time we access the pinctrl registers of
> this block.
> 
> Since pinctrl-samsung doesn't support a clock at the moment, we just
> keep the kernel from disabling it at boot, until we have an update for
> pinctrl-samsung to handle this required clock, at which point we'll be
> able to drop the flag again.
> 
> [...]

Applied, thanks!

[1/6] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
      https://git.kernel.org/krzk/linux/c/8a96d2701f7c794e45102a9cc7fc4a5c4951e699

Best regards,
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c
index 4a0520e825b6..61bb0dcf84ee 100644
--- a/drivers/clk/samsung/clk-gs101.c
+++ b/drivers/clk/samsung/clk-gs101.c
@@ -2848,7 +2848,7 @@  static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {
 	GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK,
 	     "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user",
 	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK,
-	     21, 0, 0),
+	     21, CLK_IGNORE_UNUSED, 0),
 	/* Disabling this clock makes the system hang. Mark the clock as critical. */
 	GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK,
 	     "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",