From: Yu Kuai <yukuai3@huawei.com>
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.
Fixes: f67055780caa ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
drivers/md/md.c | 5 ++++-
drivers/md/raid10.c | 16 ++--------------
drivers/md/raid5.c | 29 ++---------------------------
3 files changed, 8 insertions(+), 42 deletions(-)
@@ -9372,6 +9372,7 @@ static void md_start_sync(struct work_struct *ws)
struct mddev *mddev = container_of(ws, struct mddev, sync_work);
int spares = 0;
bool suspend = false;
+ char *name;
if (md_spares_need_change(mddev))
suspend = true;
@@ -9404,8 +9405,10 @@ static void md_start_sync(struct work_struct *ws)
if (spares)
md_bitmap_write_all(mddev->bitmap);
+ name = test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) ?
+ "reshape" : "resync";
rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "resync"));
+ md_register_thread(md_do_sync, mddev, name));
if (!mddev->sync_thread) {
pr_warn("%s: could not start resync thread...\n",
mdname(mddev));
@@ -4175,11 +4175,7 @@ static int raid10_run(struct mddev *mddev)
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread)
- goto out_free_conf;
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
}
return 0;
@@ -4573,16 +4569,8 @@ static int raid10_start_reshape(struct mddev *mddev)
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread) {
- ret = -EAGAIN;
- goto abort;
- }
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
conf->reshape_checkpoint = jiffies;
- md_wakeup_thread(mddev->sync_thread);
md_new_event();
return 0;
@@ -7936,11 +7936,7 @@ static int raid5_run(struct mddev *mddev)
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread)
- goto abort;
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
}
/* Ok, everything is just fine now */
@@ -8506,29 +8502,8 @@ static int raid5_start_reshape(struct mddev *mddev)
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread) {
- mddev->recovery = 0;
- spin_lock_irq(&conf->device_lock);
- write_seqcount_begin(&conf->gen_lock);
- mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
- mddev->new_chunk_sectors =
- conf->chunk_sectors = conf->prev_chunk_sectors;
- mddev->new_layout = conf->algorithm = conf->prev_algo;
- rdev_for_each(rdev, mddev)
- rdev->new_data_offset = rdev->data_offset;
- smp_wmb();
- conf->generation --;
- conf->reshape_progress = MaxSector;
- mddev->reshape_position = MaxSector;
- write_seqcount_end(&conf->gen_lock);
- spin_unlock_irq(&conf->device_lock);
- return -EAGAIN;
- }
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
conf->reshape_checkpoint = jiffies;
- md_wakeup_thread(mddev->sync_thread);
md_new_event();
return 0;
}