[net-next,v5,04/11] net: dsa: realtek: keep variant reference in realtek_priv
Commit Message
Instead of copying values from the variant, we can keep a reference in
realtek_priv.
This is a preliminary change for sharing code betwen interfaces. It will
allow to move most of the probe into a common module while still allow
code specific to each interface to read variant fields.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
drivers/net/dsa/realtek/realtek-mdio.c | 4 +---
drivers/net/dsa/realtek/realtek-smi.c | 10 ++++------
drivers/net/dsa/realtek/realtek.h | 5 ++---
3 files changed, 7 insertions(+), 12 deletions(-)
@@ -196,9 +196,7 @@ int realtek_mdio_probe(struct mdio_device *mdiodev)
priv->dev = &mdiodev->dev;
priv->chip_data = (void *)priv + sizeof(*priv);
- priv->clk_delay = var->clk_delay;
- priv->cmd_read = var->cmd_read;
- priv->cmd_write = var->cmd_write;
+ priv->variant = var;
priv->ops = var->ops;
priv->write_reg_noack = realtek_mdio_write;
@@ -46,7 +46,7 @@
static inline void realtek_smi_clk_delay(struct realtek_priv *priv)
{
- ndelay(priv->clk_delay);
+ ndelay(priv->variant->clk_delay);
}
static void realtek_smi_start(struct realtek_priv *priv)
@@ -209,7 +209,7 @@ static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data)
realtek_smi_start(priv);
/* Send READ command */
- ret = realtek_smi_write_byte(priv, priv->cmd_read);
+ ret = realtek_smi_write_byte(priv, priv->variant->cmd_read);
if (ret)
goto out;
@@ -250,7 +250,7 @@ static int realtek_smi_write_reg(struct realtek_priv *priv,
realtek_smi_start(priv);
/* Send WRITE command */
- ret = realtek_smi_write_byte(priv, priv->cmd_write);
+ ret = realtek_smi_write_byte(priv, priv->variant->cmd_write);
if (ret)
goto out;
@@ -459,9 +459,7 @@ int realtek_smi_probe(struct platform_device *pdev)
/* Link forward and backward */
priv->dev = dev;
- priv->clk_delay = var->clk_delay;
- priv->cmd_read = var->cmd_read;
- priv->cmd_write = var->cmd_write;
+ priv->variant = var;
priv->ops = var->ops;
priv->setup_interface = realtek_smi_setup_mdio;
@@ -58,9 +58,8 @@ struct realtek_priv {
struct mii_bus *bus;
int mdio_addr;
- unsigned int clk_delay;
- u8 cmd_read;
- u8 cmd_write;
+ const struct realtek_variant *variant;
+
spinlock_t lock; /* Locks around command writes */
struct dsa_switch *ds;
struct irq_domain *irqdomain;