[net-next,v5,03/11] net: dsa: realtek: convert variants into real drivers

Message ID 20240130-realtek_reverse-v5-3-ecafd9283a07@gmail.com
State New
Headers
Series net: dsa: realtek: variants to drivers, interfaces to a common module |

Commit Message

Luiz Angelo Daros de Luca Jan. 30, 2024, 11:13 p.m. UTC
  Previously, the interface modules realtek-smi and realtek-mdio served as
a platform and an MDIO driver, respectively. Each interface module
redundantly specified the same compatible strings for both variants and
referenced symbols from the variants.

Now, each variant module has been transformed into a unified driver
serving both as a platform and an MDIO driver. This modification
reverses the relationship between the interface and variant modules,
with the variant module now utilizing symbols from the interface
modules.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
 drivers/net/dsa/realtek/Kconfig        | 20 +++-------
 drivers/net/dsa/realtek/realtek-mdio.c | 68 +++++++++++++++++++------------
 drivers/net/dsa/realtek/realtek-mdio.h | 48 ++++++++++++++++++++++
 drivers/net/dsa/realtek/realtek-smi.c  | 73 +++++++++++++++++++---------------
 drivers/net/dsa/realtek/realtek-smi.h  | 48 ++++++++++++++++++++++
 drivers/net/dsa/realtek/rtl8365mb.c    | 54 ++++++++++++++++++++++++-
 drivers/net/dsa/realtek/rtl8366rb.c    | 54 ++++++++++++++++++++++++-
 7 files changed, 292 insertions(+), 73 deletions(-)
  

Comments

Vladimir Oltean Feb. 1, 2024, 11:30 a.m. UTC | #1
On Tue, Jan 30, 2024 at 08:13:22PM -0300, Luiz Angelo Daros de Luca wrote:
> Previously, the interface modules realtek-smi and realtek-mdio served as
> a platform and an MDIO driver, respectively. Each interface module
> redundantly specified the same compatible strings for both variants and
> referenced symbols from the variants.
> 
> Now, each variant module has been transformed into a unified driver
> serving both as a platform and an MDIO driver. This modification
> reverses the relationship between the interface and variant modules,
> with the variant module now utilizing symbols from the interface
> modules.
> 
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

Some minor non-functional comments below which you might decide not to
address now, depending on what else is pointed out during review.

> diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
> index c2572463679f..3433f64fb0d7 100644
> --- a/drivers/net/dsa/realtek/realtek-mdio.c
> +++ b/drivers/net/dsa/realtek/realtek-mdio.c
> @@ -140,7 +141,19 @@ static const struct regmap_config realtek_mdio_nolock_regmap_config = {
>  	.disable_locking = true,
>  };
>  
> -static int realtek_mdio_probe(struct mdio_device *mdiodev)
> +/**
> + * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch
> + * @mdiodev: mdio_device to probe on.
> + *
> + * This function should be used as the .probe in an mdio_driver. It
> + * initializes realtek_priv and read data from the device-tree node. The switch
> + * is hard resetted if a method is provided. It checks the switch chip ID and,

nitpick: participle of 'reset' is 'reset'. Same comment for realtek_smi_probe().

> + * finally, a DSA switch is registered.
> + *
> + * Context: Can sleep. Takes and releases priv->map_lock.
> + * Return: Returns 0 on success, a negative error on failure.
> + */
> +int realtek_mdio_probe(struct mdio_device *mdiodev)
>  {
>  	struct realtek_priv *priv;
>  	struct device *dev = &mdiodev->dev;
> diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
> index 668336515119..d8a9a6a6b5bc 100644
> --- a/drivers/net/dsa/realtek/realtek-smi.c
> +++ b/drivers/net/dsa/realtek/realtek-smi.c
> @@ -505,8 +518,20 @@ static int realtek_smi_probe(struct platform_device *pdev)
>  	}
>  	return 0;
>  }
> +EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA);
>  
> -static void realtek_smi_remove(struct platform_device *pdev)
> +/**
> + * realtek_smi_remove() - Remove the driver of a SMI-connected switch
> + * @pdev: platform_device to be removed.
> + *
> + * This function should be used as the .remove_new in a platform_driver. First
> + * it unregisters the DSA switch and cleans internal data. If a method is
> + * provided, the hard reset is asserted to avoid traffic leakage.

FWIW, removing the driver unregisters the net devices, which disables
the ports and performs an orderly shutdown of any upper virtual net
devices as well, like bridges. So ports automatically roll back to
standalone operation before this callback is even issued.

Traffic leakage is prevented, and the switch is hard reset, but I don't
think there is any causal relationship between the two.

> + *
> + * Context: Can sleep.
> + * Return: Nothing.
> + */
> +void realtek_smi_remove(struct platform_device *pdev)
>  {
>  	struct realtek_priv *priv = platform_get_drvdata(pdev);
>
  

Patch

diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig
index 060165a85fb7..9d182fde11b4 100644
--- a/drivers/net/dsa/realtek/Kconfig
+++ b/drivers/net/dsa/realtek/Kconfig
@@ -16,37 +16,29 @@  menuconfig NET_DSA_REALTEK
 if NET_DSA_REALTEK
 
 config NET_DSA_REALTEK_MDIO
-	tristate "Realtek MDIO interface driver"
+	tristate "Realtek MDIO interface support"
 	depends on OF
-	depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB
-	depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB
-	depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB
 	help
 	  Select to enable support for registering switches configured
 	  through MDIO.
 
 config NET_DSA_REALTEK_SMI
-	tristate "Realtek SMI interface driver"
+	tristate "Realtek SMI interface support"
 	depends on OF
-	depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB
-	depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB
-	depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB
 	help
 	  Select to enable support for registering switches connected
 	  through SMI.
 
 config NET_DSA_REALTEK_RTL8365MB
-	tristate "Realtek RTL8365MB switch subdriver"
-	imply NET_DSA_REALTEK_SMI
-	imply NET_DSA_REALTEK_MDIO
+	tristate "Realtek RTL8365MB switch driver"
+	depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO
 	select NET_DSA_TAG_RTL8_4
 	help
 	  Select to enable support for Realtek RTL8365MB-VC and RTL8367S.
 
 config NET_DSA_REALTEK_RTL8366RB
-	tristate "Realtek RTL8366RB switch subdriver"
-	imply NET_DSA_REALTEK_SMI
-	imply NET_DSA_REALTEK_MDIO
+	tristate "Realtek RTL8366RB switch driver"
+	depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO
 	select NET_DSA_TAG_RTL4_A
 	help
 	  Select to enable support for Realtek RTL8366RB.
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
index c2572463679f..3433f64fb0d7 100644
--- a/drivers/net/dsa/realtek/realtek-mdio.c
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -25,6 +25,7 @@ 
 #include <linux/regmap.h>
 
 #include "realtek.h"
+#include "realtek-mdio.h"
 
 /* Read/write via mdiobus */
 #define REALTEK_MDIO_CTRL0_REG		31
@@ -140,7 +141,19 @@  static const struct regmap_config realtek_mdio_nolock_regmap_config = {
 	.disable_locking = true,
 };
 
-static int realtek_mdio_probe(struct mdio_device *mdiodev)
+/**
+ * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch
+ * @mdiodev: mdio_device to probe on.
+ *
+ * This function should be used as the .probe in an mdio_driver. It
+ * initializes realtek_priv and read data from the device-tree node. The switch
+ * is hard resetted if a method is provided. It checks the switch chip ID and,
+ * finally, a DSA switch is registered.
+ *
+ * Context: Can sleep. Takes and releases priv->map_lock.
+ * Return: Returns 0 on success, a negative error on failure.
+ */
+int realtek_mdio_probe(struct mdio_device *mdiodev)
 {
 	struct realtek_priv *priv;
 	struct device *dev = &mdiodev->dev;
@@ -235,8 +248,20 @@  static int realtek_mdio_probe(struct mdio_device *mdiodev)
 
 	return 0;
 }
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA);
 
-static void realtek_mdio_remove(struct mdio_device *mdiodev)
+/**
+ * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch
+ * @mdiodev: mdio_device to be removed.
+ *
+ * This function should be used as the .remove_new in an mdio_driver. First
+ * it unregisters the DSA switch and cleans internal data. If a method is
+ * provided, the hard reset is asserted to avoid traffic leakage.
+ *
+ * Context: Can sleep.
+ * Return: Nothing.
+ */
+void realtek_mdio_remove(struct mdio_device *mdiodev)
 {
 	struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
 
@@ -249,8 +274,21 @@  static void realtek_mdio_remove(struct mdio_device *mdiodev)
 	if (priv->reset)
 		gpiod_set_value(priv->reset, 1);
 }
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA);
 
-static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
+/**
+ * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch
+ * @mdiodev: mdio_device shutting down.
+ *
+ * This function should be used as the .shutdown in an mdio_driver. It shuts
+ * down the DSA switch and cleans the platform driver data, to prevent
+ * realtek_mdio_remove() from running afterwards, which is possible if the
+ * parent bus implements its own .shutdown() as .remove().
+ *
+ * Context: Can sleep.
+ * Return: Nothing.
+ */
+void realtek_mdio_shutdown(struct mdio_device *mdiodev)
 {
 	struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
 
@@ -261,29 +299,7 @@  static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
 
 	dev_set_drvdata(&mdiodev->dev, NULL);
 }
-
-static const struct of_device_id realtek_mdio_of_match[] = {
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
-	{ .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
-	{ .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
-#endif
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
-
-static struct mdio_driver realtek_mdio_driver = {
-	.mdiodrv.driver = {
-		.name = "realtek-mdio",
-		.of_match_table = realtek_mdio_of_match,
-	},
-	.probe  = realtek_mdio_probe,
-	.remove = realtek_mdio_remove,
-	.shutdown = realtek_mdio_shutdown,
-};
-
-mdio_module_driver(realtek_mdio_driver);
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA);
 
 MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
 MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
diff --git a/drivers/net/dsa/realtek/realtek-mdio.h b/drivers/net/dsa/realtek/realtek-mdio.h
new file mode 100644
index 000000000000..ee70f6a5b8ff
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-mdio.h
@@ -0,0 +1,48 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _REALTEK_MDIO_H
+#define _REALTEK_MDIO_H
+
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO)
+
+static inline int realtek_mdio_driver_register(struct mdio_driver *drv)
+{
+	return mdio_driver_register(drv);
+}
+
+static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv)
+{
+	mdio_driver_unregister(drv);
+}
+
+int realtek_mdio_probe(struct mdio_device *mdiodev);
+void realtek_mdio_remove(struct mdio_device *mdiodev);
+void realtek_mdio_shutdown(struct mdio_device *mdiodev);
+
+#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */
+
+static inline int realtek_mdio_driver_register(struct mdio_driver *drv)
+{
+	return 0;
+}
+
+static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv)
+{
+}
+
+static inline int realtek_mdio_probe(struct mdio_device *mdiodev)
+{
+	return -ENOENT;
+}
+
+static inline void realtek_mdio_remove(struct mdio_device *mdiodev)
+{
+}
+
+static inline void realtek_mdio_shutdown(struct mdio_device *mdiodev)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */
+
+#endif /* _REALTEK_MDIO_H */
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
index 668336515119..d8a9a6a6b5bc 100644
--- a/drivers/net/dsa/realtek/realtek-smi.c
+++ b/drivers/net/dsa/realtek/realtek-smi.c
@@ -40,6 +40,7 @@ 
 #include <linux/if_bridge.h>
 
 #include "realtek.h"
+#include "realtek-smi.h"
 
 #define REALTEK_SMI_ACK_RETRY_COUNT		5
 
@@ -408,7 +409,19 @@  static int realtek_smi_setup_mdio(struct dsa_switch *ds)
 	return ret;
 }
 
-static int realtek_smi_probe(struct platform_device *pdev)
+/**
+ * realtek_smi_probe() - Probe a platform device for an SMI-connected switch
+ * @pdev: platform_device to probe on.
+ *
+ * This function should be used as the .probe in a platform_driver. It
+ * initializes realtek_priv and read data from the device-tree node. The switch
+ * is hard resetted if a method is provided. It checks the switch chip ID and,
+ * finally, a DSA switch is registered.
+ *
+ * Context: Can sleep. Takes and releases priv->map_lock.
+ * Return: Returns 0 on success, a negative error on failure.
+ */
+int realtek_smi_probe(struct platform_device *pdev)
 {
 	const struct realtek_variant *var;
 	struct device *dev = &pdev->dev;
@@ -505,8 +518,20 @@  static int realtek_smi_probe(struct platform_device *pdev)
 	}
 	return 0;
 }
+EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA);
 
-static void realtek_smi_remove(struct platform_device *pdev)
+/**
+ * realtek_smi_remove() - Remove the driver of a SMI-connected switch
+ * @pdev: platform_device to be removed.
+ *
+ * This function should be used as the .remove_new in a platform_driver. First
+ * it unregisters the DSA switch and cleans internal data. If a method is
+ * provided, the hard reset is asserted to avoid traffic leakage.
+ *
+ * Context: Can sleep.
+ * Return: Nothing.
+ */
+void realtek_smi_remove(struct platform_device *pdev)
 {
 	struct realtek_priv *priv = platform_get_drvdata(pdev);
 
@@ -521,8 +546,21 @@  static void realtek_smi_remove(struct platform_device *pdev)
 	if (priv->reset)
 		gpiod_set_value(priv->reset, 1);
 }
+EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA);
 
-static void realtek_smi_shutdown(struct platform_device *pdev)
+/**
+ * realtek_smi_shutdown() - Shutdown the driver of a SMI-connected switch
+ * @pdev: platform_device shutting down.
+ *
+ * This function should be used as the .shutdown in a platform_driver. It shuts
+ * down the DSA switch and cleans the platform driver data, to prevent
+ * realtek_smi_remove() from running afterwards, which is possible if the
+ * parent bus implements its own .shutdown() as .remove().
+ *
+ * Context: Can sleep.
+ * Return: Nothing.
+ */
+void realtek_smi_shutdown(struct platform_device *pdev)
 {
 	struct realtek_priv *priv = platform_get_drvdata(pdev);
 
@@ -533,34 +571,7 @@  static void realtek_smi_shutdown(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 }
-
-static const struct of_device_id realtek_smi_of_match[] = {
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
-	{
-		.compatible = "realtek,rtl8366rb",
-		.data = &rtl8366rb_variant,
-	},
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
-	{
-		.compatible = "realtek,rtl8365mb",
-		.data = &rtl8365mb_variant,
-	},
-#endif
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
-
-static struct platform_driver realtek_smi_driver = {
-	.driver = {
-		.name = "realtek-smi",
-		.of_match_table = realtek_smi_of_match,
-	},
-	.probe  = realtek_smi_probe,
-	.remove_new = realtek_smi_remove,
-	.shutdown = realtek_smi_shutdown,
-};
-module_platform_driver(realtek_smi_driver);
+EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA);
 
 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
 MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface");
diff --git a/drivers/net/dsa/realtek/realtek-smi.h b/drivers/net/dsa/realtek/realtek-smi.h
new file mode 100644
index 000000000000..ea49a2edd3c8
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-smi.h
@@ -0,0 +1,48 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _REALTEK_SMI_H
+#define _REALTEK_SMI_H
+
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI)
+
+static inline int realtek_smi_driver_register(struct platform_driver *drv)
+{
+	return platform_driver_register(drv);
+}
+
+static inline void realtek_smi_driver_unregister(struct platform_driver *drv)
+{
+	platform_driver_unregister(drv);
+}
+
+int realtek_smi_probe(struct platform_device *pdev);
+void realtek_smi_remove(struct platform_device *pdev);
+void realtek_smi_shutdown(struct platform_device *pdev);
+
+#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */
+
+static inline int realtek_smi_driver_register(struct platform_driver *drv)
+{
+	return 0;
+}
+
+static inline void realtek_smi_driver_unregister(struct platform_driver *drv)
+{
+}
+
+static inline int realtek_smi_probe(struct platform_device *pdev)
+{
+	return -ENOENT;
+}
+
+static inline void realtek_smi_remove(struct platform_device *pdev)
+{
+}
+
+static inline void realtek_smi_shutdown(struct platform_device *pdev)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */
+
+#endif  /* _REALTEK_SMI_H */
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index c42ee8241ca2..e67c4562f5db 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -101,6 +101,8 @@ 
 #include <linux/if_vlan.h>
 
 #include "realtek.h"
+#include "realtek-smi.h"
+#include "realtek-mdio.h"
 
 /* Family-specific data and limits */
 #define RTL8365MB_PHYADDRMAX		7
@@ -2172,7 +2174,57 @@  const struct realtek_variant rtl8365mb_variant = {
 	.cmd_write = 0xb8,
 	.chip_data_sz = sizeof(struct rtl8365mb),
 };
-EXPORT_SYMBOL_GPL(rtl8365mb_variant);
+
+static const struct of_device_id rtl8365mb_of_match[] = {
+	{ .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rtl8365mb_of_match);
+
+static struct platform_driver rtl8365mb_smi_driver = {
+	.driver = {
+		.name = "rtl8365mb-smi",
+		.of_match_table = rtl8365mb_of_match,
+	},
+	.probe  = realtek_smi_probe,
+	.remove_new = realtek_smi_remove,
+	.shutdown = realtek_smi_shutdown,
+};
+
+static struct mdio_driver rtl8365mb_mdio_driver = {
+	.mdiodrv.driver = {
+		.name = "rtl8365mb-mdio",
+		.of_match_table = rtl8365mb_of_match,
+	},
+	.probe  = realtek_mdio_probe,
+	.remove = realtek_mdio_remove,
+	.shutdown = realtek_mdio_shutdown,
+};
+
+static int rtl8365mb_init(void)
+{
+	int ret;
+
+	ret = realtek_mdio_driver_register(&rtl8365mb_mdio_driver);
+	if (ret)
+		return ret;
+
+	ret = realtek_smi_driver_register(&rtl8365mb_smi_driver);
+	if (ret) {
+		realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver);
+		return ret;
+	}
+
+	return 0;
+}
+module_init(rtl8365mb_init);
+
+static void __exit rtl8365mb_exit(void)
+{
+	realtek_smi_driver_unregister(&rtl8365mb_smi_driver);
+	realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver);
+}
+module_exit(rtl8365mb_exit);
 
 MODULE_AUTHOR("Alvin Šipraga <alsi@bang-olufsen.dk>");
 MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch");
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index 6661d4ba6882..747407ae8225 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -23,6 +23,8 @@ 
 #include <linux/regmap.h>
 
 #include "realtek.h"
+#include "realtek-smi.h"
+#include "realtek-mdio.h"
 
 #define RTL8366RB_PORT_NUM_CPU		5
 #define RTL8366RB_NUM_PORTS		6
@@ -1933,7 +1935,57 @@  const struct realtek_variant rtl8366rb_variant = {
 	.cmd_write = 0xa8,
 	.chip_data_sz = sizeof(struct rtl8366rb),
 };
-EXPORT_SYMBOL_GPL(rtl8366rb_variant);
+
+static const struct of_device_id rtl8366rb_of_match[] = {
+	{ .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rtl8366rb_of_match);
+
+static struct platform_driver rtl8366rb_smi_driver = {
+	.driver = {
+		.name = "rtl8366rb-smi",
+		.of_match_table = rtl8366rb_of_match,
+	},
+	.probe  = realtek_smi_probe,
+	.remove_new = realtek_smi_remove,
+	.shutdown = realtek_smi_shutdown,
+};
+
+static struct mdio_driver rtl8366rb_mdio_driver = {
+	.mdiodrv.driver = {
+		.name = "rtl8366rb-mdio",
+		.of_match_table = rtl8366rb_of_match,
+	},
+	.probe  = realtek_mdio_probe,
+	.remove = realtek_mdio_remove,
+	.shutdown = realtek_mdio_shutdown,
+};
+
+static int rtl8366rb_init(void)
+{
+	int ret;
+
+	ret = realtek_mdio_driver_register(&rtl8366rb_mdio_driver);
+	if (ret)
+		return ret;
+
+	ret = realtek_smi_driver_register(&rtl8366rb_smi_driver);
+	if (ret) {
+		realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver);
+		return ret;
+	}
+
+	return 0;
+}
+module_init(rtl8366rb_init);
+
+static void __exit rtl8366rb_exit(void)
+{
+	realtek_smi_driver_unregister(&rtl8366rb_smi_driver);
+	realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver);
+}
+module_exit(rtl8366rb_exit);
 
 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
 MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch");