Move setup functions to common pcie-plda-host.c. So these two functions
can be re-used.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/Kconfig | 4 +
drivers/pci/controller/plda/Makefile | 1 +
.../pci/controller/plda/pcie-microchip-host.c | 59 ---------------
drivers/pci/controller/plda/pcie-plda-host.c | 73 +++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 5 ++
5 files changed, 83 insertions(+), 59 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
@@ -3,10 +3,14 @@
menu "PLDA-based PCIe controllers"
depends on PCI
+config PCIE_PLDA_HOST
+ bool
+
config PCIE_MICROCHIP_HOST
tristate "Microchip AXI PCIe controller"
depends on PCI_MSI && OF
select PCI_HOST_COMMON
+ select PCIE_PLDA_HOST
help
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
@@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
-{
- u32 atr_sz = ilog2(size) - 1;
- u32 val;
-
- if (index == 0)
- val = PCIE_CONFIG_INTERFACE;
- else
- val = PCIE_TX_RX_INTERFACE;
-
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_PARAM);
-
- val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
- ATR_IMPL_ENABLE;
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRCADDR_PARAM);
-
- val = upper_32_bits(axi_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRC_ADDR);
-
- val = lower_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
-
- val = upper_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
-
- val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
- writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
-}
-
-static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
- struct plda_pcie_rp *port)
-{
- void __iomem *bridge_base_addr = port->bridge_addr;
- struct resource_entry *entry;
- u64 pci_addr;
- u32 index = 1;
-
- resource_list_for_each_entry(entry, &bridge->windows) {
- if (resource_type(entry->res) == IORESOURCE_MEM) {
- pci_addr = entry->res->start - entry->offset;
- plda_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
- index++;
- }
- }
-
- return 0;
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
new file mode 100644
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PLDA PCIe XpressRich host controller driver
+ *
+ * Copyright (C) 2023 Microchip Co. Ltd
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ */
+
+#include <linux/pci-ecam.h>
+
+#include "pcie-plda.h"
+
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
+{
+ u32 atr_sz = ilog2(size) - 1;
+ u32 val;
+
+ if (index == 0)
+ val = PCIE_CONFIG_INTERFACE;
+ else
+ val = PCIE_TX_RX_INTERFACE;
+
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_PARAM);
+
+ val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+ ATR_IMPL_ENABLE;
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+ val = upper_32_bits(axi_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRC_ADDR);
+
+ val = lower_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+ val = upper_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+ val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+ writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
+
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port)
+{
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ struct resource_entry *entry;
+ u64 pci_addr;
+ u32 index = 1;
+
+ resource_list_for_each_entry(entry, &bridge->windows) {
+ if (resource_type(entry->res) == IORESOURCE_MEM) {
+ pci_addr = entry->res->start - entry->offset;
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
+ index++;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
@@ -126,4 +126,9 @@ struct plda_pcie_rp {
void __iomem *bridge_addr;
};
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size);
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port);
#endif