Some ASPM related tasks, such as save and restore of LTR and L1SS
capabilities, still need to be performed when CONFIG_PCIASPM=n. To prepare
for these changes, wrap the current code in aspm.c with an ifdef and always
build. Also move pci_configure_ltr() and pci_bridge_reconfigure_ltr() into
aspm.c since they only build when CONFIG_PCIEASPM is set.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
---
drivers/pci/pci.c | 18 ---------
drivers/pci/pci.h | 5 ++-
drivers/pci/pcie/Makefile | 2 +-
drivers/pci/pcie/aspm.c | 78 +++++++++++++++++++++++++++++++++++++++
drivers/pci/probe.c | 61 ------------------------------
5 files changed, 83 insertions(+), 81 deletions(-)
@@ -1563,24 +1563,6 @@ static int pci_save_pcie_state(struct pci_dev *dev)
return 0;
}
-void pci_bridge_reconfigure_ltr(struct pci_dev *dev)
-{
-#ifdef CONFIG_PCIEASPM
- struct pci_dev *bridge;
- u32 ctl;
-
- bridge = pci_upstream_bridge(dev);
- if (bridge && bridge->ltr_path) {
- pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
- if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
- pci_dbg(bridge, "re-enabling LTR\n");
- pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_LTR_EN);
- }
- }
-#endif
-}
-
static void pci_restore_pcie_state(struct pci_dev *dev)
{
int i = 0;
@@ -97,7 +97,6 @@ void pci_msi_init(struct pci_dev *dev);
void pci_msix_init(struct pci_dev *dev);
bool pci_bridge_d3_possible(struct pci_dev *dev);
void pci_bridge_d3_update(struct pci_dev *dev);
-void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type);
static inline void pci_wakeup_event(struct pci_dev *dev)
@@ -571,11 +570,15 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
void pcie_aspm_pm_state_change(struct pci_dev *pdev);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
+void pci_configure_ltr(struct pci_dev *pdev);
+void pci_bridge_reconfigure_ltr(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
+static inline void pci_configure_ltr(struct pci_dev *pdev) { }
+static inline void pci_bridge_reconfigure_ltr(struct pci_dev *pdev) { }
#endif
#ifdef CONFIG_PCIE_ECRC
@@ -6,7 +6,7 @@ pcieportdrv-y := portdrv.o rcec.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
-obj-$(CONFIG_PCIEASPM) += aspm.o
+obj-y += aspm.o
obj-$(CONFIG_PCIEAER) += aer.o err.o
obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
obj-$(CONFIG_PCIE_PME) += pme.o
@@ -24,6 +24,8 @@
#include "../pci.h"
+#ifdef CONFIG_PCIEASPM
+
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
@@ -943,6 +945,81 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
up_read(&pci_bus_sem);
}
+void pci_bridge_reconfigure_ltr(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+ u32 ctl;
+
+ bridge = pci_upstream_bridge(pdev);
+ if (bridge && bridge->ltr_path) {
+ pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
+ if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
+ pci_dbg(bridge, "re-enabling LTR\n");
+ pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ }
+ }
+}
+
+void pci_configure_ltr(struct pci_dev *pdev)
+{
+ struct pci_host_bridge *host = pci_find_host_bridge(pdev->bus);
+ struct pci_dev *bridge;
+ u32 cap, ctl;
+
+ if (!pci_is_pcie(pdev))
+ return;
+
+ /* Read L1 PM substate capabilities */
+ pdev->l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+
+ pcie_capability_read_dword(pdev, PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_DEVCAP2_LTR))
+ return;
+
+ pcie_capability_read_dword(pdev, PCI_EXP_DEVCTL2, &ctl);
+ if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) {
+ pdev->ltr_path = 1;
+ return;
+ }
+
+ bridge = pci_upstream_bridge(pdev);
+ if (bridge && bridge->ltr_path)
+ pdev->ltr_path = 1;
+
+ return;
+ }
+
+ if (!host->native_ltr)
+ return;
+
+ /*
+ * Software must not enable LTR in an Endpoint unless the Root
+ * Complex and all intermediate Switches indicate support for LTR.
+ * PCIe r4.0, sec 6.18.
+ */
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) {
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ pdev->ltr_path = 1;
+ return;
+ }
+
+ /*
+ * If we're configuring a hot-added device, LTR was likely
+ * disabled in the upstream bridge, so re-enable it before enabling
+ * it in the new device.
+ */
+ bridge = pci_upstream_bridge(pdev);
+ if (bridge && bridge->ltr_path) {
+ pci_bridge_reconfigure_ltr(pdev);
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ pdev->ltr_path = 1;
+ }
+}
+
/* Recheck latencies and update aspm_capable for links under the root */
static void pcie_update_aspm_capable(struct pcie_link_state *root)
{
@@ -1447,3 +1524,4 @@ bool pcie_aspm_support_enabled(void)
{
return aspm_support_enabled;
}
+#endif /* CONFIG_PCIEASPM */
@@ -2159,67 +2159,6 @@ static void pci_configure_relaxed_ordering(struct pci_dev *dev)
}
}
-static void pci_configure_ltr(struct pci_dev *dev)
-{
-#ifdef CONFIG_PCIEASPM
- struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
- struct pci_dev *bridge;
- u32 cap, ctl;
-
- if (!pci_is_pcie(dev))
- return;
-
- /* Read L1 PM substate capabilities */
- dev->l1ss = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_L1SS);
-
- pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
- if (!(cap & PCI_EXP_DEVCAP2_LTR))
- return;
-
- pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl);
- if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
- dev->ltr_path = 1;
- return;
- }
-
- bridge = pci_upstream_bridge(dev);
- if (bridge && bridge->ltr_path)
- dev->ltr_path = 1;
-
- return;
- }
-
- if (!host->native_ltr)
- return;
-
- /*
- * Software must not enable LTR in an Endpoint unless the Root
- * Complex and all intermediate Switches indicate support for LTR.
- * PCIe r4.0, sec 6.18.
- */
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_LTR_EN);
- dev->ltr_path = 1;
- return;
- }
-
- /*
- * If we're configuring a hot-added device, LTR was likely
- * disabled in the upstream bridge, so re-enable it before enabling
- * it in the new device.
- */
- bridge = pci_upstream_bridge(dev);
- if (bridge && bridge->ltr_path) {
- pci_bridge_reconfigure_ltr(dev);
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_LTR_EN);
- dev->ltr_path = 1;
- }
-#endif
-}
-
static void pci_configure_eetlp_prefix(struct pci_dev *dev)
{
#ifdef CONFIG_PCI_PASID