[1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on

Message ID 20240127003607.501086-2-andre.draszik@linaro.org
State New
Headers
Series [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on |

Commit Message

André Draszik Jan. 27, 2024, 12:35 a.m. UTC
  This pclk clock is required any time we access the pinctrl registers of
this block.

Since pinctrl-samsung doesn't support a clock at the moment, we just
keep the kernel from disabling it at boot, until we have an update for
pinctrl-samsung to handle this required clock, at which point we'll be
able to drop the flag again.

Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/clk/samsung/clk-gs101.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
  

Comments

Sam Protsenko Jan. 27, 2024, 3:06 a.m. UTC | #1
On Fri, Jan 26, 2024 at 6:37 PM André Draszik <andre.draszik@linaro.org> wrote:
>
> This pclk clock is required any time we access the pinctrl registers of
> this block.
>
> Since pinctrl-samsung doesn't support a clock at the moment, we just
> keep the kernel from disabling it at boot, until we have an update for
> pinctrl-samsung to handle this required clock, at which point we'll be
> able to drop the flag again.
>
> Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> ---

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

>  drivers/clk/samsung/clk-gs101.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c
> index 4a0520e825b6..61bb0dcf84ee 100644
> --- a/drivers/clk/samsung/clk-gs101.c
> +++ b/drivers/clk/samsung/clk-gs101.c
> @@ -2848,7 +2848,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {
>         GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK,
>              "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user",
>              CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK,
> -            21, 0, 0),
> +            21, CLK_IGNORE_UNUSED, 0),
>         /* Disabling this clock makes the system hang. Mark the clock as critical. */
>         GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK,
>              "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",
> --
> 2.43.0.429.g432eaa2c6b-goog
>
  
Tudor Ambarus Jan. 27, 2024, 3:51 a.m. UTC | #2
On 1/27/24 00:35, André Draszik wrote:
> This pclk clock is required any time we access the pinctrl registers of
> this block.
> 
> Since pinctrl-samsung doesn't support a clock at the moment, we just
> keep the kernel from disabling it at boot, until we have an update for
> pinctrl-samsung to handle this required clock, at which point we'll be
> able to drop the flag again.
> 
> Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
> Signed-off-by: André Draszik <andre.draszik@linaro.org>

Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>

> ---
>  drivers/clk/samsung/clk-gs101.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c
> index 4a0520e825b6..61bb0dcf84ee 100644
> --- a/drivers/clk/samsung/clk-gs101.c
> +++ b/drivers/clk/samsung/clk-gs101.c
> @@ -2848,7 +2848,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {
>  	GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK,
>  	     "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user",
>  	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK,
> -	     21, 0, 0),
> +	     21, CLK_IGNORE_UNUSED, 0),
>  	/* Disabling this clock makes the system hang. Mark the clock as critical. */
>  	GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK,
>  	     "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",
  
Peter Griffin Jan. 29, 2024, 12:54 p.m. UTC | #3
On Sat, 27 Jan 2024 at 00:37, André Draszik <andre.draszik@linaro.org> wrote:
>
> This pclk clock is required any time we access the pinctrl registers of
> this block.
>
> Since pinctrl-samsung doesn't support a clock at the moment, we just
> keep the kernel from disabling it at boot, until we have an update for
> pinctrl-samsung to handle this required clock, at which point we'll be
> able to drop the flag again.
>
> Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> ---

Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
  

Patch

diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c
index 4a0520e825b6..61bb0dcf84ee 100644
--- a/drivers/clk/samsung/clk-gs101.c
+++ b/drivers/clk/samsung/clk-gs101.c
@@ -2848,7 +2848,7 @@  static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {
 	GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK,
 	     "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user",
 	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK,
-	     21, 0, 0),
+	     21, CLK_IGNORE_UNUSED, 0),
 	/* Disabling this clock makes the system hang. Mark the clock as critical. */
 	GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK,
 	     "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",