[5/9] arm64: dts: exynos: gs101: define USI12 with I2C configuration

Message ID 20240127001926.495769-6-andre.draszik@linaro.org
State New
Headers
Series [1/9] clk: samsung: gs-101: drop extra empty line |

Commit Message

André Draszik Jan. 27, 2024, 12:19 a.m. UTC
  On the gs101-oriole board, i2c bus 12 has various USB-related
controllers attached to it.

Note the selection of the USI protocol is intentionally left for the
board dts file.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)
  

Comments

Sam Protsenko Jan. 27, 2024, 2:55 a.m. UTC | #1
On Fri, Jan 26, 2024 at 6:19 PM André Draszik <andre.draszik@linaro.org> wrote:
>
> On the gs101-oriole board, i2c bus 12 has various USB-related
> controllers attached to it.
>
> Note the selection of the USI protocol is intentionally left for the
> board dts file.
>
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> ---
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 30 ++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> index 5088c81fd6aa..d66590fa922f 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -450,6 +450,36 @@ pinctrl_peric1: pinctrl@10c40000 {
>                         interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
>                 };
>
> +               usi12: usi@10d500c0 {
> +                       compatible = "google,gs101-usi",
> +                                    "samsung,exynos850-usi";

It doesn't fit on one line?

> +                       reg = <0x10d500c0 0x20>;
> +                       ranges;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
> +                                <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
> +                       clock-names = "pclk", "ipclk";
> +                       samsung,sysreg = <&sysreg_peric1 0x1010>;
> +                       samsung,mode = <USI_V2_NONE>;
> +                       status = "disabled";
> +
> +                       hsi2c_12: i2c@10d50000 {
> +                               compatible = "google,gs101-hsi2c",
> +                                            "samsung,exynosautov9-hsi2c";
> +                               reg = <0x10d50000 0xc0>;
> +                               interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&hsi2c12_bus>;

I remember Krzysztof asked me to put pinctrl-0 first in my recent
patches. Not sure how important it is, just saying. Other than that,
LGTM:

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

> +                               clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
> +                                        <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
> +                               clock-names = "hsi2c", "hsi2c_pclk";
> +                               status = "disabled";
> +                       };
> +               };
> +
>                 pinctrl_hsi1: pinctrl@11840000 {
>                         compatible = "google,gs101-pinctrl";
>                         reg = <0x11840000 0x00001000>;
> --
> 2.43.0.429.g432eaa2c6b-goog
>
  
André Draszik Jan. 29, 2024, 10:26 a.m. UTC | #2
On Fri, 2024-01-26 at 20:55 -0600, Sam Protsenko wrote:
> On Fri, Jan 26, 2024 at 6:19 PM André Draszik <andre.draszik@linaro.org> wrote:
> > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > @@ -450,6 +450,36 @@ pinctrl_peric1: pinctrl@10c40000 {
> >                         interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
> >                 };
> > 
> > +               usi12: usi@10d500c0 {
> > +                       compatible = "google,gs101-usi",
> > +                                    "samsung,exynos850-usi";
> 
> It doesn't fit on one line?

No, it's 81 characters. While I know it's not a hard rule in this case,
there are other cases in this file where the line was split in the same
way, so I followed that.

> > +                               pinctrl-names = "default";
> > +                               pinctrl-0 = <&hsi2c12_bus>;
> 
> I remember Krzysztof asked me to put pinctrl-0 first in my recent
> patches. Not sure how important it is, just saying. Other than that,

Makes sense, this came from a copy/paste and I have fixed it.

Cheers,
Andre'
  

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 5088c81fd6aa..d66590fa922f 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -450,6 +450,36 @@  pinctrl_peric1: pinctrl@10c40000 {
 			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi12: usi@10d500c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1010>;
+			samsung,mode = <USI_V2_NONE>;
+			status = "disabled";
+
+			hsi2c_12: i2c@10d50000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d50000 0xc0>;
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c12_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
 		pinctrl_hsi1: pinctrl@11840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x11840000 0x00001000>;