[net-next,v10,1/5] dt-bindings: net: phy: Make LED active-low property common
Commit Message
Move LED active-low property to common.yaml. This property is currently
defined multiple times by bcm LEDs. This property will now be supported
in a generic way for PHY LEDs with the use of a generic function.
With active-low bool property not defined, active-high is always
assumed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes v10:
- Add Review and Ack tag
Changes v5:
- Make active-low generic
Changes v4:
- Drop support for global active-low
- Rework to polarity option (for marvell10g series support)
Changes v3:
- Out of RFC
Changes v2:
- Add this patch
Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 4 ----
Documentation/devicetree/bindings/leds/leds-bcm6328.yaml | 4 ----
Documentation/devicetree/bindings/leds/leds-bcm6358.txt | 2 --
.../devicetree/bindings/leds/leds-pwm-multicolor.yaml | 4 ----
Documentation/devicetree/bindings/leds/leds-pwm.yaml | 5 -----
6 files changed, 6 insertions(+), 19 deletions(-)
@@ -200,6 +200,12 @@ properties:
#trigger-source-cells property in the source node.
$ref: /schemas/types.yaml#/definitions/phandle-array
+ active-low:
+ type: boolean
+ description:
+ Makes LED active low. To turn the LED ON, line needs to be
+ set to low voltage instead of high.
+
# Required properties for flash LED child nodes:
flash-max-microamp:
description:
@@ -52,10 +52,6 @@ patternProperties:
maxItems: 1
description: LED pin number
- active-low:
- type: boolean
- description: Makes LED active low
-
required:
- reg
@@ -78,10 +78,6 @@ patternProperties:
- maximum: 23
description: LED pin number (only LEDs 0 to 23 are valid).
- active-low:
- type: boolean
- description: Makes LED active low.
-
brcm,hardware-controlled:
type: boolean
description: Makes this LED hardware controlled.
@@ -25,8 +25,6 @@ LED sub-node required properties:
LED sub-node optional properties:
- label : see Documentation/devicetree/bindings/leds/common.txt
- - active-low : Boolean, makes LED active low.
- Default : false
- default-state : see
Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger : see
@@ -41,10 +41,6 @@ properties:
pwm-names: true
- active-low:
- description: For PWMs where the LED is wired to supply rather than ground.
- type: boolean
-
color: true
required:
@@ -34,11 +34,6 @@ patternProperties:
Maximum brightness possible for the LED
$ref: /schemas/types.yaml#/definitions/uint32
- active-low:
- description:
- For PWMs where the LED is wired to supply rather than ground.
- type: boolean
-
required:
- pwms
- max-brightness