[1/2] dt-bindings: thermal-zones: Don't require polling-delay(-passive)

Message ID 20240125-topic-thermal-v1-1-3c9d4dced138@linaro.org
State New
Headers
Series Assume polling-delay(-passive) = 0 when absent |

Commit Message

Konrad Dybcio Jan. 25, 2024, 12:11 p.m. UTC
  Currently, thermal zones associated with providers that have interrupts
for signaling hot/critical trips are required to set a polling-delay
of 0 to indicate no polling. This feels a bit backwards.

Assume 0 (no polling) when these properties are not defined.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 2 --
 1 file changed, 2 deletions(-)
  

Comments

Conor Dooley Jan. 25, 2024, 4:51 p.m. UTC | #1
On Thu, Jan 25, 2024 at 01:11:15PM +0100, Konrad Dybcio wrote:
> Currently, thermal zones associated with providers that have interrupts
> for signaling hot/critical trips are required to set a polling-delay
> of 0 to indicate no polling. This feels a bit backwards.
> 
> Assume 0 (no polling) when these properties are not defined.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>

I think that makes sense.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

> ---
>  Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> index dbd52620d293..68398e7e8655 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> @@ -228,8 +228,6 @@ patternProperties:
>              additionalProperties: false
>  
>      required:
> -      - polling-delay
> -      - polling-delay-passive
>        - thermal-sensors
>        - trips
>  
> 
> -- 
> 2.40.1
>
  
Bjorn Andersson Feb. 2, 2024, 4:19 a.m. UTC | #2
On Thu, Jan 25, 2024 at 01:11:15PM +0100, Konrad Dybcio wrote:
> Currently, thermal zones associated with providers that have interrupts
> for signaling hot/critical trips are required to set a polling-delay
> of 0 to indicate no polling. This feels a bit backwards.
> 
> Assume 0 (no polling) when these properties are not defined.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

> ---
>  Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> index dbd52620d293..68398e7e8655 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> @@ -228,8 +228,6 @@ patternProperties:
>              additionalProperties: false
>  
>      required:
> -      - polling-delay
> -      - polling-delay-passive
>        - thermal-sensors
>        - trips
>  
> 
> -- 
> 2.40.1
>
  

Patch

diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index dbd52620d293..68398e7e8655 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -228,8 +228,6 @@  patternProperties:
             additionalProperties: false
 
     required:
-      - polling-delay
-      - polling-delay-passive
       - thermal-sensors
       - trips