[2/4] arm64: dts: ti: k3-j7200: Remove PCIe endpoint node
Commit Message
This node is an example node for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.
Examples should go in the bindings or other documentation.
Remove this node.
Signed-off-by: Andrew Davis <afd@ti.com>
---
.../dts/ti/k3-j7200-common-proc-board.dts | 7 -------
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 20 -------------------
2 files changed, 27 deletions(-)
@@ -388,10 +388,3 @@ &pcie1_rc {
phy-names = "pcie-phy";
num-lanes = <2>;
};
-
-&pcie1_ep {
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
@@ -773,26 +773,6 @@ pcie1_rc: pcie@2910000 {
status = "disabled";
};
- pcie1_ep: pcie-ep@2910000 {
- compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
- reg = <0x00 0x02910000 0x00 0x1000>,
- <0x00 0x02917000 0x00 0x400>,
- <0x00 0x0d800000 0x00 0x00800000>,
- <0x00 0x18000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
- max-link-speed = <3>;
- num-lanes = <4>;
- power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 240 6>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
usbss0: cdns-usb@4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;