[4/4] arm64: dts: qcom: sm8550-mtp: add correct analogue microphones

Message ID 20240124164505.293202-4-krzysztof.kozlowski@linaro.org
State New
Headers
Series [1/4] arm64: dts: qcom: sm8550-qrd: correct WCD9385 TX port mapping |

Commit Message

Krzysztof Kozlowski Jan. 24, 2024, 4:45 p.m. UTC
  Add proper audio routes for onboard analogue microphones AMIC[1345] -
MIC biases and route from TX macro codec to WCD9385 audio codec.

This should bring AMIC1, AMIC2 (headphones), AMIC3, AMIC4 and AMIC5
onboard microphones to work, although was not tested on the hardware.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 393702fe61aa..0c94edb8b824 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -105,14 +105,21 @@  sound {
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";