[v1,1/1] ARM: dts: imx6: skov: add aliases for all ethernet nodes

Message ID 20240124124455.738187-1-o.rempel@pengutronix.de
State New
Headers
Series [v1,1/1] ARM: dts: imx6: skov: add aliases for all ethernet nodes |

Commit Message

Oleksij Rempel Jan. 24, 2024, 12:44 p.m. UTC
  Add aliases for all ethernet nodes including the switch. It makes it
easier to find this nodes by the boot loader.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
  

Comments

Shawn Guo Feb. 6, 2024, 7:35 a.m. UTC | #1
On Wed, Jan 24, 2024 at 01:44:55PM +0100, Oleksij Rempel wrote:
> Add aliases for all ethernet nodes including the switch. It makes it
> easier to find this nodes by the boot loader.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Applied, thanks!
  

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 2731faede1cb..d59d5d0e1d19 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@  chosen {
 	aliases {
 		can0 = &can1;
 		can1 = &can2;
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
 		mdio-gpio0 = &mdio;
 		nand = &gpmi;
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs;
+		switch0 = &switch;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
 	};
@@ -60,7 +64,7 @@  mdio: mdio {
 		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
 			<&gpio1 22 GPIO_ACTIVE_HIGH>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "microchip,ksz8873";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -73,13 +77,13 @@  ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ports@0 {
+				lan1: ports@0 {
 					reg = <0>;
 					phy-mode = "internal";
 					label = "lan1";
 				};
 
-				ports@1 {
+				lan2: ports@1 {
 					reg = <1>;
 					phy-mode = "internal";
 					label = "lan2";