Message ID | 20240112142621.13525-4-prabhakar.mahadev-lad.rj@bp.renesas.com |
---|---|
State | New |
Headers |
Return-Path: <linux-kernel+bounces-24747-ouuuleilei=gmail.com@vger.kernel.org> Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:693c:2614:b0:101:6a76:bbe3 with SMTP id mm20csp209568dyc; Fri, 12 Jan 2024 06:28:43 -0800 (PST) X-Google-Smtp-Source: AGHT+IHb0qBWcT54M9k4YF7bY/qC4va09MA/1jb2JsQKcQLNh51MNOqDkN32xLBAsYWV63nMkkpW X-Received: by 2002:a05:6358:3710:b0:175:c16b:126f with SMTP id f16-20020a056358371000b00175c16b126fmr2390380rwd.56.1705069723701; Fri, 12 Jan 2024 06:28:43 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1705069723; cv=none; d=google.com; s=arc-20160816; b=gDt+YiH97nMcXSdDoruRt5/Hhb/7N1i08JZRTgEgZwAIUG0T8hPhrg4zYc4OIFtpT6 QNbeNlKhk6lM61ikmPcUR6COpCQbDuUCxjg3GTpu3UrtyDDuoCPM1PO3Z6bgd4isha7s eLdPK/DoasAoB5CUZKowgmw4Gkjh0vXKxGnMNsKCOARCX6AZAEwcalaH5XHmr+T8V515 P1n4HRd/MXRfWzJ3A9wHLXoiU1EJuaqpbFhhjEFvxob1vhUVkAV8f712VRJ8KHlSOvn9 tO21b9+DmIuRpkweUyPlJ9Y78HHVqJYLo6oQw0vHfyVXodyZhhReOTRwj293qabuwdal ngzQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:list-unsubscribe :list-subscribe:list-id:precedence:references:in-reply-to:message-id :date:subject:cc:to:from:dkim-signature; bh=Kdyg0V8UXWHJnHyjJWow9MZ/XKXVEw7F8X1cJyMmX+4=; fh=9jERyHaBVkSYjvKDLj7G39aR/G88vFciZPp35CZ8FfY=; b=Y3p142ov1vngEjTU5xEo76cgKCM8P1jsi9bpYz7vzVCH3moLe4QyWX7nsF8gwax+2b E4YaAwsi3jTxqbk/+aEWVw4MpjJiTLuZFzOqGqrBiiEi8F48E6UM/5C1oudQtcPJmPkf LtZb8nVME+GUHcxkW18GO+ZH3Kntau4vRUmTXEsyerlkmnMwEkVydf6Vv/vIrN2H6HVk MPGN7LfBopAzfs9j/f02jyL7FPi8UVxW9icaD71UvrIQPKCW86S3FWOavGEc6j0t7YxZ O1I0IcaJpAEUq0IC4eCXM4iYbMIA71jVSSQ6dFk8XVWpgBV7BG+XwHf6PoLo7jE9B7Ej DnCQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@gmail.com header.s=20230601 header.b=aonVm94Q; spf=pass (google.com: domain of linux-kernel+bounces-24747-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) smtp.mailfrom="linux-kernel+bounces-24747-ouuuleilei=gmail.com@vger.kernel.org"; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=gmail.com Received: from sy.mirrors.kernel.org (sy.mirrors.kernel.org. [147.75.48.161]) by mx.google.com with ESMTPS id f22-20020a637556000000b005cd83290446si3163891pgn.669.2024.01.12.06.28.43 for <ouuuleilei@gmail.com> (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 12 Jan 2024 06:28:43 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel+bounces-24747-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161; Authentication-Results: mx.google.com; dkim=pass header.i=@gmail.com header.s=20230601 header.b=aonVm94Q; spf=pass (google.com: domain of linux-kernel+bounces-24747-ouuuleilei=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) smtp.mailfrom="linux-kernel+bounces-24747-ouuuleilei=gmail.com@vger.kernel.org"; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=gmail.com Received: from smtp.subspace.kernel.org (wormhole.subspace.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by sy.mirrors.kernel.org (Postfix) with ESMTPS id 70F73B215A7 for <ouuuleilei@gmail.com>; Fri, 12 Jan 2024 14:27:47 +0000 (UTC) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.subspace.kernel.org (Postfix) with ESMTP id DDC4273170; Fri, 12 Jan 2024 14:26:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="aonVm94Q" Received: from mail-wm1-f44.google.com (mail-wm1-f44.google.com [209.85.128.44]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BFAF56E2A0; Fri, 12 Jan 2024 14:26:32 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Received: by mail-wm1-f44.google.com with SMTP id 5b1f17b1804b1-40e60e137aaso17319295e9.0; Fri, 12 Jan 2024 06:26:32 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1705069591; x=1705674391; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Kdyg0V8UXWHJnHyjJWow9MZ/XKXVEw7F8X1cJyMmX+4=; b=aonVm94Qy+2tfj0SRhs2YpxoUEbFZiWFWXKJffcH5b2TtpnArCLEZuVWVa/u9NKqJ0 6I6ZNUJt5RCOXdsi5pxpdvwrwb7hOqZt7BoxQl0keaFOiHid5z8u9ery7bhST4JxlTjK 2JJ52jGtOvPFkwrbp0ZRwIv32nF7MtfvPeUIxJynrkIOjeoyJuqCAgfGWUCboPTRm7L7 wvDwZ67IaXTAq5jAqEV2kcCsHN8zEcEi0FBtL0+rNsNsVzD0bnscZ9s6wkK73ZF+KNNO Ykk6oraK+C6MponGtTrBqwAa9bnfW+W3s3tYDa5eqwgWm/mHIUpyoT56hoKb6BMDuyc1 3RKw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1705069591; x=1705674391; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Kdyg0V8UXWHJnHyjJWow9MZ/XKXVEw7F8X1cJyMmX+4=; b=RbtzouIyTNdaepqci7M48gX84LrdVAvma6vkplkvD61OCN3hVYJN9OSc5OGMWOp2sE +XE9b1fLc6HCHI2lPRR6Xe5wZYswnUJqES4/l8RNz7fUw3T4WjtVAih+1MBXyK5L3opD ZKh2nM1WxBEdyAmHtmBmg3E9uVCOyEhCg0BTq1r+xeYrEVeG901OeKtLoiLur+utIKKk bWifpFi5hx60QxzEDoC1lTg654GTe9DCv6qxbFlkeEw/K6BvY4CMd3yRhdhEiiNoJPPj EMYSjHo8lBkKpg7dteSae0MJZD/kZ9eyR3C0n4UXDaNcjYJ/hjWr5HIygOmrGh1ndtS5 Vtug== X-Gm-Message-State: AOJu0Yx4Q1BuGq9j6B6QNyAmJchMvjlqICyhDrF0Dc+B2VLQA+0NofaR oKEJaK+Tc5/SVuHsYGSuFd8= X-Received: by 2002:a05:600c:5108:b0:40c:258d:2f01 with SMTP id o8-20020a05600c510800b0040c258d2f01mr802638wms.105.1705069590668; Fri, 12 Jan 2024 06:26:30 -0800 (PST) Received: from prasmi.home ([2a00:23c8:2500:a01:494d:c489:3d96:1b15]) by smtp.gmail.com with ESMTPSA id f6-20020a5d4dc6000000b00336a2566aa2sm4021219wru.61.2024.01.12.06.26.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 12 Jan 2024 06:26:30 -0800 (PST) From: Prabhakar <prabhakar.csengg@gmail.com> X-Google-Original-From: Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> To: Geert Uytterhoeven <geert+renesas@glider.be>, Magnus Damm <magnus.damm@gmail.com>, Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Prabhakar <prabhakar.csengg@gmail.com>, Biju Das <biju.das.jz@bp.renesas.com>, Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>, Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28 Date: Fri, 12 Jan 2024 14:26:20 +0000 Message-Id: <20240112142621.13525-4-prabhakar.mahadev-lad.rj@bp.renesas.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240112142621.13525-1-prabhakar.mahadev-lad.rj@bp.renesas.com> References: <20240112142621.13525-1-prabhakar.mahadev-lad.rj@bp.renesas.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: <linux-kernel.vger.kernel.org> List-Subscribe: <mailto:linux-kernel+subscribe@vger.kernel.org> List-Unsubscribe: <mailto:linux-kernel+unsubscribe@vger.kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1787895191036817108 X-GMAIL-MSGID: 1787895191036817108 |
Series |
[v4,1/4] pinctrl: renesas: rzg2l: Improve code for readability
|
|
Commit Message
Lad, Prabhakar
Jan. 12, 2024, 2:26 p.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Add the missing port pins P19 to P28 for RZ/Five SoC. These additional pins provide expanded capabilities and are exclusive to the RZ/Five SoC. Couple of port pins have different configuration and are not identical for the complete port so introduce struct rzg2l_variable_pin_cfg to handle such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config is then assigned in rzg2l_pinctrl_get_variable_pin_cfg(). Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins which support interrupt facility. While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 213 +++++++++++++++++++++++- 1 file changed, 204 insertions(+), 9 deletions(-)
Comments
Hi Prabhakar, > -----Original Message----- > From: Prabhakar <prabhakar.csengg@gmail.com> > Sent: Friday, January 12, 2024 2:26 PM > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing > port pins P19 to P28 > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Add the missing port pins P19 to P28 for RZ/Five SoC. These additional > pins provide expanded capabilities and are exclusive to the RZ/Five SoC. > > Couple of port pins have different configuration and are not identical for > the complete port so introduce struct rzg2l_variable_pin_cfg to handle > such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config > is then assigned in rzg2l_pinctrl_get_variable_pin_cfg(). > > Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO > pins which support interrupt facility. > > While at define RZG2L_GPIO_PORT_PACK() using > RZG2L_GPIO_PORT_SPARSE_PACK(). > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > drivers/pinctrl/renesas/pinctrl-rzg2l.c | 213 +++++++++++++++++++++++- > 1 file changed, 204 insertions(+), 9 deletions(-) > > diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > index 8b8644d2c355..04bb21d564d4 100644 > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > @@ -57,6 +57,8 @@ > #define PIN_CFG_IOLH_C BIT(13) > #define PIN_CFG_SOFT_PS BIT(14) > #define PIN_CFG_OEN BIT(15) > +#define PIN_CFG_VARIABLE BIT(16) > +#define PIN_CFG_NOGPIO_INT BIT(17) > > #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ > (PIN_CFG_IOLH_##group | \ > @@ -76,17 +78,23 @@ > PIN_CFG_FILNUM | \ > PIN_CFG_FILCLKSEL) > > -/* > - * n indicates number of pins in the port, a is the register index > - * and f is pin configuration capabilities supported. > - */ > #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) > #define PIN_CFG_PIN_REG_MASK GENMASK(27, 20) > #define PIN_CFG_MASK GENMASK(19, 0) > > -#define RZG2L_GPIO_PORT_PACK(n, a, f) ((((1ULL << (n)) - 1) << 28) | \ > - FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) > | \ > - FIELD_PREP_CONST(PIN_CFG_MASK, (f))) > +/* > + * m indicates the bitmap of supported pins, a is the register index > + * and f is pin configuration capabilities supported. > + */ > +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) > (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ > + > FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ > + FIELD_PREP_CONST(PIN_CFG_MASK, (f))) > + > +/* > + * n indicates number of pins in the port, a is the register index > + * and f is pin configuration capabilities supported. > + */ > +#define RZG2L_GPIO_PORT_PACK(n, a, f) > RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) > > /* > * BIT(63) indicates dedicated pin, p is the register index while @@ - > 200,6 +208,18 @@ struct rzg2l_dedicated_configs { > u64 config; > }; > > +/** > + * struct rzg2l_variable_pin_cfg - pin data cfg > + * @cfg: port pin configuration > + * @port: port number > + * @pin: port pin > + */ > +struct rzg2l_variable_pin_cfg { > + u32 cfg:20; > + u8 port:5; u32 ?? > + u8 pin:5; u32 ?? Cheers, Biju
Hi Biju, Thank you for the review. On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> wrote: > > > Hi Prabhakar, > > > -----Original Message----- > > From: Prabhakar <prabhakar.csengg@gmail.com> > > Sent: Friday, January 12, 2024 2:26 PM > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing > > port pins P19 to P28 > > <snip> > > > > +/** > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > + * @cfg: port pin configuration > > + * @port: port number > > + * @pin: port pin > > + */ > > +struct rzg2l_variable_pin_cfg { > > + u32 cfg:20; > > + u8 port:5; > > u32 ?? This is done based on the feedback provided previously by Geert [0]. > > + u8 pin:5; > > u32 ?? > ditto. [0] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20231201131551.201503-3-prabhakar.mahadev-lad.rj@bp.renesas.com/#25625118 Cheers, Prabhakar
> -----Original Message----- > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > Sent: Friday, January 12, 2024 5:06 PM > Subject: Re: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > missing port pins P19 to P28 > > Hi Biju, > > Thank you for the review. > > On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> > wrote: > > > > > > Hi Prabhakar, > > > > > -----Original Message----- > > > From: Prabhakar <prabhakar.csengg@gmail.com> > > > Sent: Friday, January 12, 2024 2:26 PM > > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > > > missing port pins P19 to P28 > > > > <snip> > > > > > > +/** > > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > > + * @cfg: port pin configuration > > > + * @port: port number > > > + * @pin: port pin > > > + */ > > > +struct rzg2l_variable_pin_cfg { > > > + u32 cfg:20; > > > + u8 port:5; > > > > u32 ?? > This is done based on the feedback provided previously by Geert [0]. > > > > + u8 pin:5; > > > > u32 ?? > > > ditto. > As per[0] suggestion is, As cfg only contains the lower bits (PIN_CFG_*), I think you can fit everything in a u32: u32 cfg: 20; u32 port: 5; u32 pin: 3; Cheers, Biju
On Fri, Jan 12, 2024 at 5:10 PM Biju Das <biju.das.jz@bp.renesas.com> wrote: > > > > > -----Original Message----- > > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > Sent: Friday, January 12, 2024 5:06 PM > > Subject: Re: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > > missing port pins P19 to P28 > > > > Hi Biju, > > > > Thank you for the review. > > > > On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> > > wrote: > > > > > > > > > Hi Prabhakar, > > > > > > > -----Original Message----- > > > > From: Prabhakar <prabhakar.csengg@gmail.com> > > > > Sent: Friday, January 12, 2024 2:26 PM > > > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > > > > missing port pins P19 to P28 > > > > > > <snip> > > > > > > > > +/** > > > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > > > + * @cfg: port pin configuration > > > > + * @port: port number > > > > + * @pin: port pin > > > > + */ > > > > +struct rzg2l_variable_pin_cfg { > > > > + u32 cfg:20; > > > > + u8 port:5; > > > > > > u32 ?? > > This is done based on the feedback provided previously by Geert [0]. > > > > > > + u8 pin:5; > > > > > > u32 ?? > > > > > ditto. > > > > As per[0] suggestion is, > > As cfg only contains the lower bits (PIN_CFG_*), I think you can fit > everything in a u32: > > u32 cfg: 20; > u32 port: 5; > u32 pin: 3; > Ouch my bad, i'll send a v5 with this change. Cheers, Prabhakar
Hi Prabhakar, kernel test robot noticed the following build errors: [auto build test ERROR on geert-renesas-drivers/renesas-pinctrl] [cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833 base: https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl patch link: https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28 config: openrisc-allyesconfig (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/config) compiler: or1k-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202401132220.aTrR8ckA-lkp@intel.com/ All errors (new ones prefixed by >>): 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:730:31: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 730 | u8 pinmap = FIELD_GET(PIN_CFG_PIN_MAP_MASK, cfg); | ^~~~~~~~~~~~~~~~~~~~ In file included from include/linux/bitfield.h:10: drivers/pinctrl/renesas/pinctrl-rzg2l.c: At top level: include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[0]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[1]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[2]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[3]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[4]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[5]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[6]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[7]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[8]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[9]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[10]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[11]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[12]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[13]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[14]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[15]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[16]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[17]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[18]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ >> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[19]') 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ | ^~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), | ^~~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant 16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); }))) | ^ include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) | ^~~~~~~~~~~~~~~~~ include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2' 139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ | ^~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf' 45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1) | ^ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) | ^~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK' 89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK' 97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK' 1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), | ^~~~~~~~~~~~~~~~~~~~ include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative] 35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) | ^~ include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST' 141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ | ^~~~~ include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK' 37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l)) | ^~~~~~~~~ drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK' 81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) vim +89 drivers/pinctrl/renesas/pinctrl-rzg2l.c 84 85 /* 86 * m indicates the bitmap of supported pins, a is the register index 87 * and f is pin configuration capabilities supported. 88 */ > 89 #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ 90 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ 91 FIELD_PREP_CONST(PIN_CFG_MASK, (f))) 92
Hi Prabhakar,
kernel test robot noticed the following build errors:
[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base: https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link: https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: powerpc-randconfig-r081-20240113 (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401140457.dWlCUkuN-lkp@intel.com/
All errors (new ones prefixed by >>):
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: error: anonymous bit-field has negative width (-1)
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:47: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
^
include/linux/bitfield.h:137:3: note: expanded from macro 'FIELD_PREP_CONST'
BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
^
include/linux/build_bug.h:16:53: note: expanded from macro 'BUILD_BUG_ON_ZERO'
#define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
vim +1579 drivers/pinctrl/renesas/pinctrl-rzg2l.c
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1535
943be6806bed3f Lad Prabhakar 2024-01-12 1536 static const u64 r9a07g044_gpio_configs[] = {
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1537 RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1538 RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1539 RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1540 RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1541 RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1542 RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1543 RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1544 RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1545 RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1546 RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1547 RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1548 RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1549 RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1550 RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1551 RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1552 RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1553 RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
fcfb63148c241a Biju Das 2021-09-22 1554 RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1555 RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1556 RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1557 RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1558 RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1559 RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1560 RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1561 RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1562 RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1563 RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1564 RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1565 RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1566 RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1567 RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1568 RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1569 RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1570 RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1571 RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1572 RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1573 RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1574 RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1575 RZG2L_GPIO_PORT_PACK(2, 0x36, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1576 RZG2L_GPIO_PORT_PACK(3, 0x37, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1577 RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1578 RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 @1579 RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1580 RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1581 RZG2L_GPIO_PORT_PACK(4, 0x3c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1582 RZG2L_GPIO_PORT_PACK(4, 0x3d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1583 RZG2L_GPIO_PORT_PACK(4, 0x3e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1584 RZG2L_GPIO_PORT_PACK(4, 0x3f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1585 RZG2L_GPIO_PORT_PACK(5, 0x40, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1586 };
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1587
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index 8b8644d2c355..04bb21d564d4 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -57,6 +57,8 @@ #define PIN_CFG_IOLH_C BIT(13) #define PIN_CFG_SOFT_PS BIT(14) #define PIN_CFG_OEN BIT(15) +#define PIN_CFG_VARIABLE BIT(16) +#define PIN_CFG_NOGPIO_INT BIT(17) #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ (PIN_CFG_IOLH_##group | \ @@ -76,17 +78,23 @@ PIN_CFG_FILNUM | \ PIN_CFG_FILCLKSEL) -/* - * n indicates number of pins in the port, a is the register index - * and f is pin configuration capabilities supported. - */ #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) #define PIN_CFG_PIN_REG_MASK GENMASK(27, 20) #define PIN_CFG_MASK GENMASK(19, 0) -#define RZG2L_GPIO_PORT_PACK(n, a, f) ((((1ULL << (n)) - 1) << 28) | \ - FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ - FIELD_PREP_CONST(PIN_CFG_MASK, (f))) +/* + * m indicates the bitmap of supported pins, a is the register index + * and f is pin configuration capabilities supported. + */ +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ + FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ + FIELD_PREP_CONST(PIN_CFG_MASK, (f))) + +/* + * n indicates number of pins in the port, a is the register index + * and f is pin configuration capabilities supported. + */ +#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) /* * BIT(63) indicates dedicated pin, p is the register index while @@ -200,6 +208,18 @@ struct rzg2l_dedicated_configs { u64 config; }; +/** + * struct rzg2l_variable_pin_cfg - pin data cfg + * @cfg: port pin configuration + * @port: port number + * @pin: port pin + */ +struct rzg2l_variable_pin_cfg { + u32 cfg:20; + u8 port:5; + u8 pin:5; +}; + struct rzg2l_pinctrl_data { const char * const *port_pins; const u64 *port_pin_configs; @@ -208,6 +228,8 @@ struct rzg2l_pinctrl_data { unsigned int n_port_pins; unsigned int n_dedicated_pins; const struct rzg2l_hwcfg *hwcfg; + const struct rzg2l_variable_pin_cfg *variable_pin_cfg; + unsigned int n_variable_pin_cfg; }; /** @@ -243,6 +265,143 @@ struct rzg2l_pinctrl { static const u16 available_ps[] = { 1800, 2500, 3300 }; +#ifdef CONFIG_RISCV +static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl, + u64 pincfg, + unsigned int port, + u8 pin) +{ + unsigned int i; + + for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) { + if (pctrl->data->variable_pin_cfg[i].port == port && + pctrl->data->variable_pin_cfg[i].pin == pin) + return (pincfg & ~PIN_CFG_VARIABLE) | pctrl->data->variable_pin_cfg[i].cfg; + } + + return 0; +} + +static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = { + { + .port = 20, + .pin = 0, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 6, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 7, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT + }, + { + .port = 23, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 0, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT, + }, +}; +#endif + static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl, u8 pin, u8 off, u8 func) { @@ -1446,6 +1605,25 @@ static const u64 r9a07g043_gpio_configs[] = { RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS), +#ifdef CONFIG_RISCV + /* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */ + RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */ + RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */ + RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF | + PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT), /* P25 */ + 0x0, /* P26 */ + 0x0, /* P27 */ + RZG2L_GPIO_PORT_PACK(6, 0x0f, RZG2L_MPXED_PIN_FUNCS | PIN_CFG_NOGPIO_INT), /* P28 */ +#endif }; static const u64 r9a08g045_gpio_configs[] = { @@ -1606,12 +1784,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = { PIN_CFG_IO_VMC_SD1)) }, }; -static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data) +static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl) { + const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq]; + const struct rzg2l_pinctrl_data *data = pctrl->data; + u64 *pin_data = pin_desc->drv_data; unsigned int gpioint; unsigned int i; u32 port, bit; + if (*pin_data & PIN_CFG_NOGPIO_INT) + return -EINVAL; + port = virq / 8; bit = virq % 8; @@ -1721,7 +1905,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc, unsigned long flags; int gpioint, irq; - gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data); + gpioint = rzg2l_gpio_get_gpioint(child, pctrl); if (gpioint < 0) return gpioint; @@ -1907,6 +2091,13 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl) if (i && !(i % RZG2L_PINS_PER_PORT)) j++; pin_data[i] = pctrl->data->port_pin_configs[j]; +#ifdef CONFIG_RISCV + if (pin_data[i] & PIN_CFG_VARIABLE) + pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl, + pin_data[i], + j, + i % RZG2L_PINS_PER_PORT); +#endif pins[i].drv_data = &pin_data[i]; } @@ -2058,6 +2249,10 @@ static struct rzg2l_pinctrl_data r9a07g043_data = { .n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT, .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common), .hwcfg = &rzg2l_hwcfg, +#ifdef CONFIG_RISCV + .variable_pin_cfg = r9a07g043f_variable_pin_cfg, + .n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg), +#endif }; static struct rzg2l_pinctrl_data r9a07g044_data = {