diff mbox series

[net-next,3/3] net: phy: at803x: make read_status more generic

Message ID 20231227091946.12937-4-ansuelsmth@gmail.com
State New
Headers
Series [net-next,1/3] net: phy: at803x: generalize cdt fault length function |

Commit Message

Christian Marangi Dec. 27, 2023, 9:19 a.m. UTC 
  Make read_status more generic in preparation on moving it to shared
library as other PHY Family Driver will have the exact same
implementation.

The only specific part was a check for AR8031/33 if 1000basex was used.
The check is moved to a dedicated function specific for those PHYs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/at803x.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index a2f5d608b59e..2408001683cf 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1087,13 +1087,9 @@  static int at803x_read_specific_status(struct phy_device *phydev,
 
 static int at803x_read_status(struct phy_device *phydev)
 {
-	struct at803x_priv *priv = phydev->priv;
 	struct at803x_ss_mask ss_mask = { 0 };
 	int err, old_link = phydev->link;
 
-	if (priv->is_1000basex)
-		return genphy_c37_read_status(phydev);
-
 	/* Update the link, but return if there was an error */
 	err = genphy_update_link(phydev);
 	if (err)
@@ -1685,6 +1681,17 @@  static int at8031_config_intr(struct phy_device *phydev)
 	return at803x_config_intr(phydev);
 }
 
+/* AR8031 and AR8033 share the same read status logic */
+static int at8031_read_status(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	if (priv->is_1000basex)
+		return genphy_c37_read_status(phydev);
+
+	return at803x_read_status(phydev);
+}
+
 /* AR8031 and AR8035 share the same cable test get status reg */
 static int at8031_cable_test_get_status(struct phy_device *phydev,
 					bool *finished)
@@ -2569,7 +2576,7 @@  static struct phy_driver at803x_driver[] = {
 	.read_page		= at803x_read_page,
 	.write_page		= at803x_write_page,
 	.get_features		= at803x_get_features,
-	.read_status		= at803x_read_status,
+	.read_status		= at8031_read_status,
 	.config_intr		= at8031_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,