Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
---
drivers/platform/x86/intel/pmc/adl.c | 9 +++------
drivers/platform/x86/intel/pmc/cnp.c | 26 ++++++++++++++++++++------
drivers/platform/x86/intel/pmc/core.h | 3 +++
drivers/platform/x86/intel/pmc/mtl.c | 9 +++------
drivers/platform/x86/intel/pmc/tgl.c | 8 +++-----
5 files changed, 32 insertions(+), 23 deletions(-)
@@ -316,6 +316,9 @@ int adl_core_init(struct pmc_dev *pmcdev)
struct pmc *pmc = pmcdev->pmcs[PMC_IDX_MAIN];
int ret;
+ pmcdev->suspend = cnl_suspend;
+ pmcdev->resume = cnl_resume;
+
pmc->map = &adl_reg_map;
ret = get_primary_reg_base(pmc);
if (ret)
@@ -323,11 +326,5 @@ int adl_core_init(struct pmc_dev *pmcdev)
pmc_core_get_low_power_modes(pmcdev);
- /* Due to a hardware limitation, the GBE LTR blocks PC10
- * when a cable is attached. Tell the PMC to ignore it.
- */
- dev_dbg(&pmcdev->pdev->dev, "ignoring GBE LTR\n");
- pmc_core_send_ltr_ignore(pmcdev, 3, 1);
-
return 0;
}
@@ -204,11 +204,31 @@ const struct pmc_reg_map cnp_reg_map = {
.etr3_offset = ETR3_OFFSET,
};
+void cnl_suspend(struct pmc_dev *pmcdev)
+{
+ /*
+ * Due to a hardware limitation, the GBE LTR blocks PC10
+ * when a cable is attached. To unblock PC10 during suspend,
+ * tell the PMC to ignore it.
+ */
+ pmc_core_send_ltr_ignore(pmcdev, 3, 1);
+}
+
+int cnl_resume(struct pmc_dev *pmcdev)
+{
+ pmc_core_send_ltr_ignore(pmcdev, 3, 0);
+
+ return pmc_core_resume_common(pmcdev);
+}
+
int cnp_core_init(struct pmc_dev *pmcdev)
{
struct pmc *pmc = pmcdev->pmcs[PMC_IDX_MAIN];
int ret;
+ pmcdev->suspend = cnl_suspend;
+ pmcdev->resume = cnl_resume;
+
pmc->map = &cnp_reg_map;
ret = get_primary_reg_base(pmc);
if (ret)
@@ -216,11 +236,5 @@ int cnp_core_init(struct pmc_dev *pmcdev)
pmc_core_get_low_power_modes(pmcdev);
- /* Due to a hardware limitation, the GBE LTR blocks PC10
- * when a cable is attached. Tell the PMC to ignore it.
- */
- dev_dbg(&pmcdev->pdev->dev, "ignoring GBE LTR\n");
- pmc_core_send_ltr_ignore(pmcdev, 3, 1);
-
return 0;
}
@@ -589,6 +589,9 @@ int mtl_core_init(struct pmc_dev *pmcdev);
int arl_core_init(struct pmc_dev *pmcdev);
int lnl_core_init(struct pmc_dev *pmcdev);
+void cnl_suspend(struct pmc_dev *pmcdev);
+int cnl_resume(struct pmc_dev *pmcdev);
+
#define pmc_for_each_mode(i, mode, pmcdev) \
for (i = 0, mode = pmcdev->lpm_en_modes[i]; \
i < pmcdev->num_lpm_modes; \
@@ -986,6 +986,8 @@ static void mtl_d3_fixup(void)
static int mtl_resume(struct pmc_dev *pmcdev)
{
mtl_d3_fixup();
+ pmc_core_send_ltr_ignore(pmcdev, 3, 0);
+
return pmc_core_resume_common(pmcdev);
}
@@ -998,6 +1000,7 @@ int mtl_core_init(struct pmc_dev *pmcdev)
mtl_d3_fixup();
+ pmcdev->suspend = cnl_suspend;
pmcdev->resume = mtl_resume;
pmcdev->regmap_list = mtl_pmc_info_list;
@@ -1019,12 +1022,6 @@ int mtl_core_init(struct pmc_dev *pmcdev)
pmc_core_get_low_power_modes(pmcdev);
pmc_core_punit_pmt_init(pmcdev, MTL_PMT_DMU_GUID);
- /* Due to a hardware limitation, the GBE LTR blocks PC10
- * when a cable is attached. Tell the PMC to ignore it.
- */
- dev_dbg(&pmcdev->pdev->dev, "ignoring GBE LTR\n");
- pmc_core_send_ltr_ignore(pmcdev, 3, 1);
-
if (ssram_init)
return pmc_core_ssram_get_lpm_reqs(pmcdev);
@@ -305,17 +305,15 @@ int tgl_core_generic_init(struct pmc_dev *pmcdev, int pch_tp)
else
pmc->map = &tgl_reg_map;
+ pmcdev->suspend = cnl_suspend;
+ pmcdev->resume = cnl_resume;
+
ret = get_primary_reg_base(pmc);
if (ret)
return ret;
pmc_core_get_low_power_modes(pmcdev);
pmc_core_get_tgl_lpm_reqs(pmcdev->pdev);
- /* Due to a hardware limitation, the GBE LTR blocks PC10
- * when a cable is attached. Tell the PMC to ignore it.
- */
- dev_dbg(&pmcdev->pdev->dev, "ignoring GBE LTR\n");
- pmc_core_send_ltr_ignore(pmcdev, 3, 1);
return 0;
}