[V3,4/6] nvmem: u-boot-env: use nvmem device helpers
Commit Message
From: Rafał Miłecki <rafal@milecki.pl>
Use nvmem_dev_size() and nvmem_device_read() to make this driver less
mtd dependent.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
V2: Don't introduce memleak when handling nvmem_device_read() failures
V3: Split PATCH 3/3 into two
drivers/nvmem/u-boot-env.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
@@ -127,27 +127,34 @@ static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
static int u_boot_env_parse(struct u_boot_env *priv)
{
+ struct nvmem_device *nvmem = priv->nvmem;
struct device *dev = priv->dev;
size_t crc32_data_offset;
size_t crc32_data_len;
size_t crc32_offset;
size_t data_offset;
size_t data_len;
+ size_t dev_size;
uint32_t crc32;
uint32_t calc;
- size_t bytes;
uint8_t *buf;
+ int bytes;
int err;
- buf = kcalloc(1, priv->mtd->size, GFP_KERNEL);
+ dev_size = nvmem_dev_size(nvmem);
+
+ buf = kcalloc(1, dev_size, GFP_KERNEL);
if (!buf) {
err = -ENOMEM;
goto err_out;
}
- err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf);
- if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) {
- dev_err(dev, "Failed to read from mtd: %d\n", err);
+ bytes = nvmem_device_read(nvmem, 0, dev_size, buf);
+ if (bytes < 0) {
+ err = bytes;
+ goto err_kfree;
+ } else if (bytes != dev_size) {
+ err = -EIO;
goto err_kfree;
}
@@ -169,8 +176,8 @@ static int u_boot_env_parse(struct u_boot_env *priv)
break;
}
crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
- crc32_data_len = priv->mtd->size - crc32_data_offset;
- data_len = priv->mtd->size - data_offset;
+ crc32_data_len = dev_size - crc32_data_offset;
+ data_len = dev_size - data_offset;
calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
if (calc != crc32) {
@@ -179,7 +186,7 @@ static int u_boot_env_parse(struct u_boot_env *priv)
goto err_kfree;
}
- buf[priv->mtd->size - 1] = '\0';
+ buf[dev_size - 1] = '\0';
err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
if (err)
dev_err(dev, "Failed to add cells: %d\n", err);