[v3,22/29] drm/rockchip: inno_hdmi: Split power mode setting

Message ID 20231219170100.188800-23-knaerzche@gmail.com
State New
Headers
Series Add HDMI support for RK3128 |

Commit Message

Alex Bee Dec. 19, 2023, 5 p.m. UTC
  This splits setting the power mode of the controller / phy in two
functions. It's done in preparation of setting up the phy based on the
pixelclock.

No functional changes intended.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
changes in v3:
 - new patch

 drivers/gpu/drm/rockchip/inno_hdmi.c | 54 +++++++++++++---------------
 drivers/gpu/drm/rockchip/inno_hdmi.h |  5 ---
 2 files changed, 24 insertions(+), 35 deletions(-)
  

Patch

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 9fea464b6234..e21f6d7aeee6 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -154,38 +154,31 @@  static void inno_hdmi_sys_power(struct inno_hdmi *hdmi, bool enable)
 		hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
 }
 
-static void inno_hdmi_set_pwr_mode(struct inno_hdmi *hdmi, int mode)
+static void inno_hdmi_standby(struct inno_hdmi *hdmi)
 {
-	switch (mode) {
-	case NORMAL:
-		inno_hdmi_sys_power(hdmi, false);
+	inno_hdmi_sys_power(hdmi, false);
 
-		hdmi_writeb(hdmi, HDMI_PHY_PRE_EMPHASIS, 0x6f);
-		hdmi_writeb(hdmi, HDMI_PHY_DRIVER, 0xbb);
-
-		hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x15);
-		hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x14);
-		hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x10);
-		hdmi_writeb(hdmi, HDMI_PHY_CHG_PWR, 0x0f);
-		hdmi_writeb(hdmi, HDMI_PHY_SYNC, 0x00);
-		hdmi_writeb(hdmi, HDMI_PHY_SYNC, 0x01);
-
-		inno_hdmi_sys_power(hdmi, true);
-		break;
+	hdmi_writeb(hdmi, HDMI_PHY_DRIVER, 0x00);
+	hdmi_writeb(hdmi, HDMI_PHY_PRE_EMPHASIS, 0x00);
+	hdmi_writeb(hdmi, HDMI_PHY_CHG_PWR, 0x00);
+	hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x15);
+};
 
-	case LOWER_PWR:
-		inno_hdmi_sys_power(hdmi, false);
-		hdmi_writeb(hdmi, HDMI_PHY_DRIVER, 0x00);
-		hdmi_writeb(hdmi, HDMI_PHY_PRE_EMPHASIS, 0x00);
-		hdmi_writeb(hdmi, HDMI_PHY_CHG_PWR, 0x00);
-		hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x15);
+static void inno_hdmi_power_up(struct inno_hdmi *hdmi)
+{
+	inno_hdmi_sys_power(hdmi, false);
 
-		break;
+	hdmi_writeb(hdmi, HDMI_PHY_PRE_EMPHASIS, 0x6f);
+	hdmi_writeb(hdmi, HDMI_PHY_DRIVER, 0xbb);
+	hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x15);
+	hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x14);
+	hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x10);
+	hdmi_writeb(hdmi, HDMI_PHY_CHG_PWR, 0x0f);
+	hdmi_writeb(hdmi, HDMI_PHY_SYNC, 0x00);
+	hdmi_writeb(hdmi, HDMI_PHY_SYNC, 0x01);
 
-	default:
-		DRM_DEV_ERROR(hdmi->dev, "Unknown power mode %d\n", mode);
-	}
-}
+	inno_hdmi_sys_power(hdmi, true);
+};
 
 static void inno_hdmi_reset(struct inno_hdmi *hdmi)
 {
@@ -202,7 +195,7 @@  static void inno_hdmi_reset(struct inno_hdmi *hdmi)
 	val = v_REG_CLK_INV | v_REG_CLK_SOURCE_SYS | v_PWR_ON | v_INT_POL_HIGH;
 	hdmi_modb(hdmi, HDMI_SYS_CTRL, msk, val);
 
-	inno_hdmi_set_pwr_mode(hdmi, LOWER_PWR);
+	inno_hdmi_standby(hdmi);
 }
 
 static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
@@ -441,6 +434,8 @@  static int inno_hdmi_setup(struct inno_hdmi *hdmi,
 	hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
 		  v_AUDIO_MUTE(0) | v_VIDEO_MUTE(0));
 
+	inno_hdmi_power_up(hdmi);
+
 	return 0;
 }
 
@@ -460,7 +455,6 @@  static void inno_hdmi_encoder_enable(struct drm_encoder *encoder,
 		return;
 
 	inno_hdmi_setup(hdmi, &crtc_state->adjusted_mode);
-	inno_hdmi_set_pwr_mode(hdmi, NORMAL);
 }
 
 static void inno_hdmi_encoder_disable(struct drm_encoder *encoder,
@@ -468,7 +462,7 @@  static void inno_hdmi_encoder_disable(struct drm_encoder *encoder,
 {
 	struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);
 
-	inno_hdmi_set_pwr_mode(hdmi, LOWER_PWR);
+	inno_hdmi_standby(hdmi);
 }
 
 static int
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.h b/drivers/gpu/drm/rockchip/inno_hdmi.h
index 93245b55f967..a7edf3559e60 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.h
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.h
@@ -10,11 +10,6 @@ 
 
 #define DDC_SEGMENT_ADDR		0x30
 
-enum PWR_MODE {
-	NORMAL,
-	LOWER_PWR,
-};
-
 #define HDMI_SCL_RATE			(100*1000)
 #define DDC_BUS_FREQ_L			0x4b
 #define DDC_BUS_FREQ_H			0x4c