[v2,1/1] arm64: dts: qcom: ipq8074: add MicroSD node

Message ID 20231218150009.1227848-1-amadeus@jmu.edu.cn
State New
Headers
Series [v2,1/1] arm64: dts: qcom: ipq8074: add MicroSD node |

Commit Message

Chukun Pan Dec. 18, 2023, 3 p.m. UTC
  Enable MicroSD card found on ipq8074 devices.
Tested fine when SD card IO voltage is 3.3v.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
Changes in v2:
* add dedicated qcom,ipq8074-sdhci compatible

 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a4f7ae35be27..4f23c4459112 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -422,6 +422,26 @@  sdhc_1: mmc@7824900 {
 			status = "disabled";
 		};
 
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x7864900 0x500>, <0x7864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			max-frequency = <192000000>;
+			bus-width = <4>;
+
+			status = "disabled";
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x2b000>;